This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Leon Brocard, This is a computer-generated error report created automatically by CPANPLUS, version 0.0562. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [CP_MSG] [Sun Mar 12 23:49:29 2006] Checking if source files are up to date [CP_MSG] [Sun Mar 12 23:49:29 2006] Retrieving /root/.cpanplus/sourcefiles.2.13.stored [CP_MSG] [Sun Mar 12 23:49:40 2006] Module 'Catalyst::Engine::Apache' already up to date, won't install without force [CP_MSG] [Sun Mar 12 23:49:41 2006] make[1]: Entering directory `/root/.cpanplus/5.8.5/build/Test-WWW-Mechanize-Catalyst-0.35' make[1]: Leaving directory `/root/.cpanplus/5.8.5/build/Test-WWW-Mechanize-Catalyst-0.35' [CP_ERROR] [Sun Mar 12 23:49:45 2006] MAKE TEST failed: make[1]: Entering directory `/root/.cpanplus/5.8.5/build/Test-WWW-Mechanize-Catalyst-0.35' PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/pod.............skipped all skipped: Test::Pod 1.14 required for testing POD: Can't locate Test/Pod.pm in @INC (@INC contains: /root/.cpanplus/5.8.5/build/Test-WWW-Mechanize-Catalyst-0.35/blib/lib /root/.cpanplus/5.8.5/build/Test-WWW-Mechanize-Catalyst-0.35/blib/arch /root/.cpanplus/5.8.5/build/Test-WWW-Mechanize-Catalyst-0.35/blib/lib/5.8.5/i386-linux-thread-multi /root/.cpanplus/5.8.5/build/Test-WWW-Mechanize-Catalyst-0.35/blib/lib/5.8.5 /root/.cpanplus/5.8.5/build/Test-WWW-Mechanize-Catalyst-0.35/blib/lib/i386-linux-thread-multi /root/.cpanplus/5.8.5/build/Test-WWW-Mechanize-Catalyst-0.35/blib/lib/5.8.4 /root/.cpanplus/5.8.5/build/Test-WWW-Mechanize-Catalyst-0.35/blib/lib/5.8.3 /root/.cpanplus/5.8.5/build/Test-WWW-Mechanize-Catalyst-0.35/blib/lib/5.8.2 /root/.cpanplus/5.8.5/build/Test-WWW-Mechanize-Catalyst-0.35/blib/lib/5.8.1 /root/.cpanplus/5.8.5/build/Test-WWW-Mechanize-Catalyst-0.35/blib/lib/5.8.0 /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.2/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl/5.8.4 /usr/lib/perl5/site_perl/5.8.3 /usr/lib/perl5/site_perl/5.8.2 /usr/lib/perl5/site_perl/5.8.1 /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.2/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.2 /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl . /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.2/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl/5.8.4 /usr/lib/perl5/site_perl/5.8.3 /usr/lib/perl5/site_perl/5.8.2 /usr/lib/perl5/site_perl/5.8.1 /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.2/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.2 /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl) at (eval 3) line 2. t/pod_coverage....skipped all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage t/redirect........[Sun Mar 12 23:49:43 2006] [catalyst] [error] Caught exception "Can't locate object method "uri_for" via package "Catty" at t/lib/Catty.pm line 34." # Failed test 'check got to hello 1/4' # in t/redirect.t at line 16. # got: 'http://localhost/hi' # expected: 'http://localhost/hello' # Failed test 'check got to hello 3/4' # in t/redirect.t at line 18. # got: "Catty" # length: 5 # expected: "Hello" # length: 5 # strings begin to differ at char 1 # Failed test 'check got to hello 4/4' # in t/redirect.t at line 19. # searched: "<html>\x{0a}<head>\x{0a} <title>Catty</title>\x{0a} <style "... # can't find: "Hi there" # Failed test 'have a previous' # in t/redirect.t at line 23. Can't call method "code" on an undefined value at t/redirect.t line 24. # Looks like you planned 27 tests but only ran 6. # Looks like you failed 4 tests of 6 run. # Looks like your test died just after 6. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 2, 4-27 Failed 25/27 tests, 7.41% okay t/simple..........ok Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t/redirect.t 255 65280 27 46 170.37% 2 4-27 2 tests skipped. Failed 1/4 test scripts, 75.00% okay. 25/36 subtests failed, 30.56% okay. make[1]: Leaving directory `/root/.cpanplus/5.8.5/build/Test-WWW-Mechanize-Catalyst-0.35' make[1]: *** [test_dynamic] Error 255 MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Test::Pod As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'Leon Brocard ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Test::Pod' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Catalyst 5.33 Test::More 0.62 Test::WWW::Mechanize 1.08 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: -- Summary of my perl5 (revision 5 version 8 subversion 5) configuration: Platform: osname=linux, osvers=2.6.9-1.906_elsmp, archname=i386-linux-thread-multi uname='linux tweety.build.redhat.com 2.6.9-1.906_elsmp #1 smp sun dec 12 22:58:08 est 2004 i686 i686 i386 gnulinux ' config_args='-des -Doptimize=-O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -Dversion=5.8.5 -Dmyhostname=localhost [EMAIL PROTECTED] -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Darchname=i386-linux -Dvendorprefix=/usr -Dsiteprefix=/usr -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dinc_version_list=5.8.4 5.8.3 5.8.2 5.8.1 5.8.0' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm', optimize='-O2 -g -pipe -m32 -march=i386 -mtune=pentium4', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -I/usr/include/gdbm' ccversion='', gccversion='3.4.4 20050721 (Red Hat 3.4.4-2)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.5/i386-linux-thread-multi/CORE' cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
