This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Tatsuhiko Miyagawa, This is a computer-generated error report created automatically by CPANPLUS, version 0.0562. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [CP_MSG] [Tue Apr 25 05:16:12 2006] Checking if source files are up to date [CP_MSG] [Tue Apr 25 05:16:12 2006] Retrieving /root/.cpanplus/sourcefiles.2.13.stored [CP_ERROR] [Tue Apr 25 05:16:15 2006] MAKE failed: make[1]: Entering directory `/root/.cpanplus/5.8.7/build/Encode-Detect-0.01' rm -f blib/arch/auto/Encode/Detect/Detect.so LD_RUN_PATH="" cc -shared -L/usr/local/lib Detect.o -o blib/arch/auto/Encode/Detect/Detect.so cc: Detect.o: No such file or directory cc: no input files make[1]: *** [blib/arch/auto/Encode/Detect/Detect.so] Error 1 make[1]: Leaving directory `/root/.cpanplus/5.8.7/build/Encode-Detect-0.01' [CP_MSG] [Tue Apr 25 05:16:15 2006] Fetching: 'http://testers.cpan.org/show/Encode-Detect.yaml' [CP_MSG] [Tue Apr 25 05:16:40 2006] 'fail' already reported for 'Encode-Detect-0.01', not cc-ing the author [CP_MSG] [Tue Apr 25 05:16:40 2006] DEFAULT 'munge_test_report' HANDLER RETURNING 'sub return value' [CP_MSG] [Tue Apr 25 05:16:41 2006] DEFAULT 'send_test_report' HANDLER RETURNING 'true' [CP_MSG] [Tue Apr 25 05:16:41 2006] DEFAULT 'edit_test_report' HANDLER RETURNING 'false' [CP_MSG] [Tue Apr 25 05:16:41 2006] Successfully sent 'fail' report for 'Encode-Detect-0.01' [CP_ERROR] [Tue Apr 25 05:16:41 2006] Unable to create a new distribution object for 'Encode::Detect' -- cannot continue [CP_MSG] [Tue Apr 25 05:16:41 2006] Module 'WebService::Bloglines' requires 'XML::Liberal' version '0.02' to be installed [CP_MSG] [Tue Apr 25 05:16:41 2006] Module 'WebService::Bloglines' requires 'XML::RSS::LibXML' version '0.09' to be installed [CP_MSG] [Tue Apr 25 05:16:41 2006] Module 'XML::Liberal' requires 'XML::LibXML' version '1.58' to be installed [CP_ERROR] [Tue Apr 25 05:16:45 2006] Could not run '/usr/bin/perl Makefile.PL': enable native perl UTF8 running xml2-config... using fallback values for LIBS and INC options: LIBS='-L/usr/local/lib -L/usr/lib -lxml2 -lm' INC='-I/usr/local/include -I/usr/include' If this is wrong, Re-run as: $ /usr/bin/perl Makefile.PL LIBS='-L/path/to/lib' INC='-I/path/to/include' looking for -lxml2... no looking for -llibxml2... no libxml2 not found Try setting LIBS and INC values on the command line Or get libxml2 from http://xmlsoft.org/ If you install via RPMs, make sure you also install the -devel RPMs, as this is where the headers (.h files) are. -- cannot continue [CP_ERROR] [Tue Apr 25 05:16:45 2006] Unable to create a new distribution object for 'XML::LibXML' -- cannot continue [CP_ERROR] [Tue Apr 25 05:16:45 2006] Failed to install 'XML::LibXML' as prerequisite for 'XML::Liberal' [CP_ERROR] [Tue Apr 25 05:16:45 2006] Unable to satisfy prerequisites for 'XML::Liberal' -- aborting install [CP_ERROR] [Tue Apr 25 05:16:45 2006] Unable to create a new distribution object for 'XML::Liberal' -- cannot continue [CP_ERROR] [Tue Apr 25 05:16:45 2006] Failed to install 'XML::Liberal' as prerequisite for 'WebService::Bloglines' [CP_ERROR] [Tue Apr 25 05:16:45 2006] Unable to satisfy prerequisites for 'WebService::Bloglines' -- aborting install [CP_ERROR] [Tue Apr 25 05:16:45 2006] Unable to create a new distribution object for 'WebService::Bloglines' -- cannot continue [CP_MSG] [Tue Apr 25 05:16:45 2006] Module 'XML::Liberal' requires 'XML::LibXML' version '1.58' to be installed [CP_ERROR] [Tue Apr 25 05:16:47 2006] Could not run '/usr/bin/perl Makefile.PL': enable native perl UTF8 running xml2-config... using fallback values for LIBS and INC options: LIBS='-L/usr/local/lib -L/usr/lib -lxml2 -lm' INC='-I/usr/local/include -I/usr/include' If this is wrong, Re-run as: $ /usr/bin/perl Makefile.PL LIBS='-L/path/to/lib' INC='-I/path/to/include' looking for -lxml2... no looking for -llibxml2... no libxml2 not found Try setting LIBS and INC values on the command line Or get libxml2 from http://xmlsoft.org/ If you install via RPMs, make sure you also install the -devel RPMs, as this is where the headers (.h files) are. -- cannot continue [CP_ERROR] [Tue Apr 25 05:16:47 2006] Unable to create a new distribution object for 'XML::LibXML' -- cannot continue [CP_ERROR] [Tue Apr 25 05:16:47 2006] Failed to install 'XML::LibXML' as prerequisite for 'XML::Liberal' [CP_ERROR] [Tue Apr 25 05:16:47 2006] Unable to satisfy prerequisites for 'XML::Liberal' -- aborting install [CP_ERROR] [Tue Apr 25 05:16:47 2006] Unable to create a new distribution object for 'XML::Liberal' -- cannot continue [CP_MSG] [Tue Apr 25 05:16:47 2006] Module 'XML::OPML' requires 'XML::SimpleObject' version '0' to be installed [CP_ERROR] [Tue Apr 25 05:16:47 2006] Could not run '/usr/bin/perl Makefile.PL': NOTE: XML::SimpleObject requires XML::Parser. If you have XML::LibXML, you can install XML::SimpleObject::LibXML instead. Checking for XML::Parser ... OK Checking if your kit is complete... Looks good Writing Makefile for XML::SimpleObject::Enhanced NOTE: XML::SimpleObject::LibXML requires XML::LibXML. If you have XML::Parser you can install XML::SimpleObject instead. Checking for XML::LibXML ... ERROR from evaluation of /root/.cpanplus/5.8.7/build/XML-SimpleObject0.53/LibXML/Makefile.PL: Can't locate XML/LibXML.pm in @INC (@INC contains: /root/.cpanplus/5.8.7/build/DateTime-Locale-0.22/blib/lib /root/.cpanplus/5.8.7/build/Class-Singleton-1.03/blib/lib /root/.cpanplus/5.8.7/build/DateTime-TimeZone-0.44/blib/lib /root/.cpanplus/5.8.7/build/DateTime-0.30/blib/lib /root/.cpanplus/5.8.7/build/DateTime-Format-Mail-0.2901/blib/lib /root/.cpanplus/5.8.7/build/DateTime-Format-Strptime-1.0700/blib/lib /root/.cpanplus/5.8.7/build/DateTime-Format-W3CDTF-0.04/blib/lib /root/.cpanplus/5.8.7/build/Number-Compare-0.01/blib/lib /root/.cpanplus/5.8.7/build/Text-Glob-0.06/blib/lib /root/.cpanplus/5.8.7/build/File-Find-Rule-0.28/blib/lib /root/.cpanplus/5.8.7/build/HTML-ResolveLink-0.02/blib/lib /root/.cpanplus/5.8.7/build/Template-Provider-Encoding-0.05/blib/lib /root/.cpanplus/5.8.7/build/Text-Tags-0.03/blib/lib /root/.cpanplus/5.8.7/build/Class-ErrorHandler-0.01/blib/lib /root/.cpanplus/5.8.7/build/URI-Fetch-0.06/blib/lib /root/.cpanplus/5.8.7/build/Plagger-0.6.4/blib/lib /etc/perl /usr/local/lib/perl/5.8.7 /usr/local/share/perl/5.8.7 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8.7 /usr/share/perl/5.8.7 /usr/local/lib/site_perl /root/.cpanplus/5.8.7/build/XML-SimpleObject0.53 .) at ./Makefile.PL line 8. -- cannot continue [CP_ERROR] [Tue Apr 25 05:16:47 2006] Unable to create a new distribution object for 'XML::SimpleObject' -- cannot continue [CP_ERROR] [Tue Apr 25 05:16:47 2006] Failed to install 'XML::SimpleObject' as prerequisite for 'XML::OPML' [CP_ERROR] [Tue Apr 25 05:16:47 2006] Unable to satisfy prerequisites for 'XML::OPML' -- aborting install [CP_ERROR] [Tue Apr 25 05:16:47 2006] Unable to create a new distribution object for 'XML::OPML' -- cannot continue [CP_MSG] [Tue Apr 25 05:16:47 2006] Module 'XML::Feed' requires 'XML::Atom' version '0.08' to be installed [CP_MSG] [Tue Apr 25 05:16:47 2006] Module 'XML::Feed' requires 'XML::RSS' version '1.01' to be installed [CP_MSG] [Tue Apr 25 05:17:18 2006] make[1]: Entering directory `/root/.cpanplus/5.8.7/build/XML-Atom-0.19' /usr/bin/perl "-Iinc" Makefile.PL --config= --installdeps=XML::LibXML,1.54,LWP::Authen::Wsse,0 *** Installing dependencies... [MSG] Checking if source files are up to date [MSG] Retrieving /root/.cpanplus/sourcefiles.2.13.stored *** Installing XML::LibXML... Running [/usr/bin/perl -MCPANPLUS::Internals::Utils::Autoflush Makefile.PL ]... enable native perl UTF8 running xml2-config... using fallback values for LIBS and INC options: LIBS='-L/usr/local/lib -L/usr/lib -lxml2 -lm' INC='-I/usr/local/include -I/usr/include' If this is wrong, Re-run as: $ /usr/bin/perl Makefile.PL LIBS='-L/path/to/lib' INC='-I/path/to/include' looking for -lxml2... no looking for -llibxml2... no libxml2 not found Try setting LIBS and INC values on the command line Or get libxml2 from http://xmlsoft.org/ If you install via RPMs, make sure you also install the -devel RPMs, as this is where the headers (.h files) are. *** XML::LibXML installation cancelled. *** Module::AutoInstall installation finished. [MSG] Writing state information back to disk. This may take a little while. [ERROR] Could not run '/usr/bin/perl Makefile.PL': enable native perl UTF8 running xml2-config... using fallback values for LIBS and INC options: LIBS='-L/usr/local/lib -L/usr/lib -lxml2 -lm' INC='-I/usr/local/include -I/usr/include' If this is wrong, Re-run as: $ /usr/bin/perl Makefile.PL LIBS='-L/path/to/lib' INC='-I/path/to/include' looking for -lxml2... no looking for -llibxml2... no libxml2 not found Try setting LIBS and INC values on the command line Or get libxml2 from http://xmlsoft.org/ If you install via RPMs, make sure you also install the -devel RPMs, as this is where the headers (.h files) are. -- cannot continue [ERROR] Unable to create a new distribution object for 'XML::LibXML' -- cannot continue Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /usr/local/share/perl/5.8.7/CPANPLUS/Backend.pm line 359 make[1]: Leaving directory `/root/.cpanplus/5.8.7/build/XML-Atom-0.19' [CP_ERROR] [Tue Apr 25 05:17:32 2006] MAKE TEST failed: Bad file descriptor make[1]: Entering directory `/root/.cpanplus/5.8.7/build/XML-Atom-0.19' /usr/bin/perl "-Iinc" Makefile.PL --config= --installdeps=XML::LibXML,1.54,LWP::Authen::Wsse,0 *** Installing dependencies... [MSG] Checking if source files are up to date [MSG] Retrieving /root/.cpanplus/sourcefiles.2.13.stored *** Installing XML::LibXML... Running [/usr/bin/perl -MCPANPLUS::Internals::Utils::Autoflush Makefile.PL ]... enable native perl UTF8 running xml2-config... using fallback values for LIBS and INC options: LIBS='-L/usr/local/lib -L/usr/lib -lxml2 -lm' INC='-I/usr/local/include -I/usr/include' If this is wrong, Re-run as: $ /usr/bin/perl Makefile.PL LIBS='-L/path/to/lib' INC='-I/path/to/include' looking for -lxml2... no looking for -llibxml2... no *** XML::LibXML installation cancelled. *** Module::AutoInstall installation finished. libxml2 not found Try setting LIBS and INC values on the command line Or get libxml2 from http://xmlsoft.org/ If you install via RPMs, make sure you also install the -devel RPMs, as this is where the headers (.h files) are. [ERROR] Could not run '/usr/bin/perl Makefile.PL': enable native perl UTF8 running xml2-config... using fallback values for LIBS and INC options: LIBS='-L/usr/local/lib -L/usr/lib -lxml2 -lm' INC='-I/usr/local/include -I/usr/include' If this is wrong, Re-run as: $ /usr/bin/perl Makefile.PL LIBS='-L/path/to/lib' INC='-I/path/to/include' looking for -lxml2... no looking for -llibxml2... no libxml2 not found Try setting LIBS and INC values on the command line Or get libxml2 from http://xmlsoft.org/ If you install via RPMs, make sure you also install the -devel RPMs, as this is where the headers (.h files) are. -- cannot continue [ERROR] Unable to create a new distribution object for 'XML::LibXML' -- cannot continue Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /usr/local/share/perl/5.8.7/CPANPLUS/Backend.pm line 359 [MSG] Writing state information back to disk. This may take a little while. PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/00-compile.t t/01-util.t t/02-content.t t/03-link.t t/04-person.t t/11-entry.t t/12-feed.t t/13-atom1.t t/14-atom1-create.t t/15-content-image.t t/16-content-binary.t t/17-renames.t t/00-compile...........ok t/01-util..............ok t/02-content...........ok t/03-link..............ok t/04-person............ok t/11-entry.............# Test 42 got: <UNDEF> (t/11-entry.t at line 87) # Expected: "Food & Drink" # t/11-entry.t line 87 is: ok($entry->get($dc->subject), 'Food & Drink'); # Test 47 got: <UNDEF> (t/11-entry.t at line 95) # Expected: "Food & Drink" # t/11-entry.t line 95 is: ok($entry2->get($dc->subject), 'Food & Drink'); # Failed test 69 in t/11-entry.t at line 149 # t/11-entry.t line 149 is: ok($entry->as_xml !~ m!<subject .*>Tech</subject>!); Couldn't open encmap euc-jp.enc: No such file or directory at /usr/lib/perl5/XML/Parser.pm line 187 dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED tests 42, 47, 69-71 Failed 5/71 tests, 92.96% okay t/12-feed..............Can't call method "get_global_pos" on an undefined value at /usr/share/perl5/XML/XPath/Node.pm line 412. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 29-31 Failed 3/31 tests, 90.32% okay t/13-atom1............. # Failed test 'atom:title' # in t/13-atom1.t at line 13. # got: undef # expected: 'dive into mark' # Failed test 'atom:version based on namespace' # in t/13-atom1.t at line 14. # got: '0.3' # expected: '1.0' # Failed test 'atom:updated' # in t/13-atom1.t at line 15. # got: undef # expected: '2005-07-11T12:29:29Z' # Failed test '2 links' # in t/13-atom1.t at line 18. # got: '0' # expected: '2' Can't call method "rel" on an undefined value at t/13-atom1.t line 48. # Looks like you planned 20 tests but only ran 5. # Looks like you failed 4 tests of 5 run. # Looks like your test died just after 5. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 2-20 Failed 19/20 tests, 5.00% okay t/14-atom1-create......ok t/15-content-image.....ok t/16-content-binary....ok t/17-renames...........Can't call method "modified" on an undefined value at t/17-renames.t line 11. # Looks like you planned 5 tests but only ran 1. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 2-5 Failed 4/5 tests, 20.00% okay Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t/11-entry.t 2 512 71 7 9.86% 42 47 69-71 t/12-feed.t 255 65280 31 6 19.35% 29-31 t/13-atom1.t 255 65280 20 34 170.00% 2-20 t/17-renames.t 255 65280 5 8 160.00% 2-5 Failed 4/12 test scripts, 66.67% okay. 31/193 subtests failed, 83.94% okay. make[1]: make[1]: Leaving directory `/root/.cpanplus/5.8.7/build/XML-Atom-0.19' *** [test_dynamic] Error 255 [CP_MSG] [Tue Apr 25 05:17:34 2006] Fetching: 'http://testers.cpan.org/show/XML-Atom.yaml' [CP_MSG] [Tue Apr 25 05:17:46 2006] 'fail' already reported for 'XML-Atom-0.19', not cc-ing the author [CP_MSG] [Tue Apr 25 05:17:46 2006] DEFAULT 'munge_test_report' HANDLER RETURNING 'sub return value' [CP_MSG] [Tue Apr 25 05:17:46 2006] DEFAULT 'send_test_report' HANDLER RETURNING 'true' [CP_MSG] [Tue Apr 25 05:17:46 2006] DEFAULT 'edit_test_report' HANDLER RETURNING 'false' [CP_MSG] [Tue Apr 25 05:17:47 2006] Successfully sent 'fail' report for 'XML-Atom-0.19' [CP_ERROR] [Tue Apr 25 05:17:47 2006] Unable to create a new distribution object for 'XML::Atom' -- cannot continue [CP_ERROR] [Tue Apr 25 05:17:47 2006] Failed to install 'XML::Atom' as prerequisite for 'XML::Feed' [CP_ERROR] [Tue Apr 25 05:17:47 2006] Unable to satisfy prerequisites for 'XML::Feed' -- aborting install [CP_ERROR] [Tue Apr 25 05:17:47 2006] Unable to create a new distribution object for 'XML::Feed' -- cannot continue [CP_MSG] [Tue Apr 25 05:17:55 2006] make[1]: Entering directory `/root/.cpanplus/5.8.7/build/XML-Atom-0.19' /usr/bin/perl "-Iinc" Makefile.PL --config= --installdeps=XML::LibXML,1.54,LWP::Authen::Wsse,0 *** Installing dependencies... [MSG] Checking if source files are up to date [MSG] Retrieving /root/.cpanplus/sourcefiles.2.13.stored *** Installing XML::LibXML... Running [/usr/bin/perl -MCPANPLUS::Internals::Utils::Autoflush Makefile.PL ]... enable native perl UTF8 running xml2-config... using fallback values for LIBS and INC options: LIBS='-L/usr/local/lib -L/usr/lib -lxml2 -lm' INC='-I/usr/local/include -I/usr/include' If this is wrong, Re-run as: $ /usr/bin/perl Makefile.PL LIBS='-L/path/to/lib' INC='-I/path/to/include' looking for -lxml2... no looking for -llibxml2... no libxml2 not found Try setting LIBS and INC values on the command line Or get libxml2 from http://xmlsoft.org/ If you install via RPMs, make sure you also install the -devel RPMs, as this is where the headers (.h files) are. *** XML::LibXML installation cancelled. *** Module::AutoInstall installation finished. [MSG] Writing state information back to disk. This may take a little while. [ERROR] Could not run '/usr/bin/perl Makefile.PL': enable native perl UTF8 running xml2-config... using fallback values for LIBS and INC options: LIBS='-L/usr/local/lib -L/usr/lib -lxml2 -lm' INC='-I/usr/local/include -I/usr/include' If this is wrong, Re-run as: $ /usr/bin/perl Makefile.PL LIBS='-L/path/to/lib' INC='-I/path/to/include' looking for -lxml2... no looking for -llibxml2... no libxml2 not found Try setting LIBS and INC values on the command line Or get libxml2 from http://xmlsoft.org/ If you install via RPMs, make sure you also install the -devel RPMs, as this is where the headers (.h files) are. -- cannot continue [ERROR] Unable to create a new distribution object for 'XML::LibXML' -- cannot continue Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /usr/local/share/perl/5.8.7/CPANPLUS/Backend.pm line 359 make[1]: Leaving directory `/root/.cpanplus/5.8.7/build/XML-Atom-0.19' [CP_ERROR] [Tue Apr 25 05:18:09 2006] MAKE TEST failed: Bad file descriptor make[1]: Entering directory `/root/.cpanplus/5.8.7/build/XML-Atom-0.19' /usr/bin/perl "-Iinc" Makefile.PL --config= --installdeps=XML::LibXML,1.54,LWP::Authen::Wsse,0 *** Installing dependencies... [MSG] Checking if source files are up to date [MSG] Retrieving /root/.cpanplus/sourcefiles.2.13.stored *** Installing XML::LibXML... Running [/usr/bin/perl -MCPANPLUS::Internals::Utils::Autoflush Makefile.PL ]... enable native perl UTF8 running xml2-config... using fallback values for LIBS and INC options: LIBS='-L/usr/local/lib -L/usr/lib -lxml2 -lm' INC='-I/usr/local/include -I/usr/include' If this is wrong, Re-run as: $ /usr/bin/perl Makefile.PL LIBS='-L/path/to/lib' INC='-I/path/to/include' looking for -lxml2... no looking for -llibxml2... no libxml2 not found Try setting LIBS and INC values on the command line Or get libxml2 from http://xmlsoft.org/ If you install via RPMs, make sure you also install the -devel RPMs, as this is where the headers (.h files) are. *** XML::LibXML installation cancelled. *** Module::AutoInstall installation finished. [MSG] Writing state information back to disk. This may take a little while. [ERROR] Could not run '/usr/bin/perl Makefile.PL': enable native perl UTF8 running xml2-config... using fallback values for LIBS and INC options: LIBS='-L/usr/local/lib -L/usr/lib -lxml2 -lm' INC='-I/usr/local/include -I/usr/include' If this is wrong, Re-run as: $ /usr/bin/perl Makefile.PL LIBS='-L/path/to/lib' INC='-I/path/to/include' looking for -lxml2... no looking for -llibxml2... no libxml2 not found Try setting LIBS and INC values on the command line Or get libxml2 from http://xmlsoft.org/ If you install via RPMs, make sure you also install the -devel RPMs, as this is where the headers (.h files) are. -- cannot continue [ERROR] Unable to create a new distribution object for 'XML::LibXML' -- cannot continue Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /usr/local/share/perl/5.8.7/CPANPLUS/Backend.pm line 359 PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/00-compile.t t/01-util.t t/02-content.t t/03-link.t t/04-person.t t/11-entry.t t/12-feed.t t/13-atom1.t t/14-atom1-create.t t/15-content-image.t t/16-content-binary.t t/17-renames.t t/00-compile...........ok t/01-util..............ok t/02-content...........ok t/03-link..............ok t/04-person............ok t/11-entry.............# Test 42 got: <UNDEF> (t/11-entry.t at line 87) # Expected: "Food & Drink" # t/11-entry.t line 87 is: ok($entry->get($dc->subject), 'Food & Drink'); # Test 47 got: <UNDEF> (t/11-entry.t at line 95) # Expected: "Food & Drink" # t/11-entry.t line 95 is: ok($entry2->get($dc->subject), 'Food & Drink'); # Failed test 69 in t/11-entry.t at line 149 # t/11-entry.t line 149 is: ok($entry->as_xml !~ m!<subject .*>Tech</subject>!); Couldn't open encmap euc-jp.enc: No such file or directory at /usr/lib/perl5/XML/Parser.pm line 187 dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED tests 42, 47, 69-71 Failed 5/71 tests, 92.96% okay t/12-feed..............Can't call method "get_global_pos" on an undefined value at /usr/share/perl5/XML/XPath/Node.pm line 412. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 29-31 Failed 3/31 tests, 90.32% okay t/13-atom1............. # Failed test 'atom:title' # in t/13-atom1.t at line 13. # got: undef # expected: 'dive into mark' # Failed test 'atom:version based on namespace' # in t/13-atom1.t at line 14. # got: '0.3' # expected: '1.0' # Failed test 'atom:updated' # in t/13-atom1.t at line 15. # got: undef # expected: '2005-07-11T12:29:29Z' # Failed test '2 links' # in t/13-atom1.t at line 18. # got: '0' # expected: '2' Can't call method "rel" on an undefined value at t/13-atom1.t line 48. # Looks like you planned 20 tests but only ran 5. # Looks like you failed 4 tests of 5 run. # Looks like your test died just after 5. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 2-20 Failed 19/20 tests, 5.00% okay t/14-atom1-create......ok t/15-content-image.....ok t/16-content-binary....ok t/17-renames...........Can't call method "modified" on an undefined value at t/17-renames.t line 11. # Looks like you planned 5 tests but only ran 1. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 2-5 Failed 4/5 tests, 20.00% okay Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t/11-entry.t 2 512 71 7 9.86% 42 47 69-71 t/12-feed.t 255 65280 31 6 19.35% 29-31 t/13-atom1.t 255 65280 20 34 170.00% 2-20 t/17-renames.t 255 65280 5 8 160.00% 2-5 Failed 4/12 test scripts, 66.67% okay. 31/193 subtests failed, 83.94% okay. make[1]: make[1]: Leaving directory `/root/.cpanplus/5.8.7/build/XML-Atom-0.19' *** [test_dynamic] Error 255 [CP_MSG] [Tue Apr 25 05:18:09 2006] Fetching: 'http://testers.cpan.org/show/XML-Atom.yaml' [CP_MSG] [Tue Apr 25 05:18:19 2006] 'fail' already reported for 'XML-Atom-0.19', not cc-ing the author [CP_MSG] [Tue Apr 25 05:18:19 2006] DEFAULT 'munge_test_report' HANDLER RETURNING 'sub return value' [CP_MSG] [Tue Apr 25 05:18:19 2006] DEFAULT 'send_test_report' HANDLER RETURNING 'true' [CP_MSG] [Tue Apr 25 05:18:19 2006] DEFAULT 'edit_test_report' HANDLER RETURNING 'false' [CP_MSG] [Tue Apr 25 05:18:20 2006] Successfully sent 'fail' report for 'XML-Atom-0.19' [CP_ERROR] [Tue Apr 25 05:18:20 2006] Unable to create a new distribution object for 'XML::Atom' -- cannot continue [CP_MSG] [Tue Apr 25 05:18:20 2006] Module 'XML::RSS::LibXML' requires 'XML::LibXML' version '0' to be installed [CP_MSG] [Tue Apr 25 05:18:20 2006] Module 'XML::RSS::LibXML' requires 'XML::LibXML::XPathContext' version '0' to be installed [CP_ERROR] [Tue Apr 25 05:18:23 2006] Could not run '/usr/bin/perl Makefile.PL': enable native perl UTF8 running xml2-config... using fallback values for LIBS and INC options: LIBS='-L/usr/local/lib -L/usr/lib -lxml2 -lm' INC='-I/usr/local/include -I/usr/include' If this is wrong, Re-run as: $ /usr/bin/perl Makefile.PL LIBS='-L/path/to/lib' INC='-I/path/to/include' looking for -lxml2... no looking for -llibxml2... no libxml2 not found Try setting LIBS and INC values on the command line Or get libxml2 from http://xmlsoft.org/ If you install via RPMs, make sure you also install the -devel RPMs, as this is where the headers (.h files) are. -- cannot continue [CP_ERROR] [Tue Apr 25 05:18:23 2006] Unable to create a new distribution object for 'XML::LibXML' -- cannot continue [CP_ERROR] [Tue Apr 25 05:18:23 2006] Failed to install 'XML::LibXML' as prerequisite for 'XML::RSS::LibXML' [CP_ERROR] [Tue Apr 25 05:18:23 2006] Unable to satisfy prerequisites for 'XML::RSS::LibXML' -- aborting install [CP_ERROR] [Tue Apr 25 05:18:23 2006] Unable to create a new distribution object for 'XML::RSS::LibXML' -- cannot continue [CP_MSG] [Tue Apr 25 05:18:23 2006] Module 'XML::RSS::Liberal' requires 'XML::Liberal' version '0.0' to be installed [CP_MSG] [Tue Apr 25 05:18:23 2006] Module 'XML::RSS::Liberal' requires 'XML::RSS::LibXML' version '0.0' to be installed [CP_MSG] [Tue Apr 25 05:18:23 2006] Module 'XML::Liberal' requires 'XML::LibXML' version '1.58' to be installed [CP_ERROR] [Tue Apr 25 05:18:25 2006] Could not run '/usr/bin/perl Makefile.PL': enable native perl UTF8 running xml2-config... using fallback values for LIBS and INC options: LIBS='-L/usr/local/lib -L/usr/lib -lxml2 -lm' INC='-I/usr/local/include -I/usr/include' If this is wrong, Re-run as: $ /usr/bin/perl Makefile.PL LIBS='-L/path/to/lib' INC='-I/path/to/include' looking for -lxml2... no looking for -llibxml2... no libxml2 not found Try setting LIBS and INC values on the command line Or get libxml2 from http://xmlsoft.org/ If you install via RPMs, make sure you also install the -devel RPMs, as this is where the headers (.h files) are. -- cannot continue [CP_ERROR] [Tue Apr 25 05:18:25 2006] Unable to create a new distribution object for 'XML::LibXML' -- cannot continue [CP_ERROR] [Tue Apr 25 05:18:25 2006] Failed to install 'XML::LibXML' as prerequisite for 'XML::Liberal' [CP_ERROR] [Tue Apr 25 05:18:25 2006] Unable to satisfy prerequisites for 'XML::Liberal' -- aborting install [CP_ERROR] [Tue Apr 25 05:18:25 2006] Unable to create a new distribution object for 'XML::Liberal' -- cannot continue [CP_ERROR] [Tue Apr 25 05:18:25 2006] Failed to install 'XML::Liberal' as prerequisite for 'XML::RSS::Liberal' [CP_ERROR] [Tue Apr 25 05:18:25 2006] Unable to satisfy prerequisites for 'XML::RSS::Liberal' -- aborting install [CP_ERROR] [Tue Apr 25 05:18:25 2006] Unable to create a new distribution object for 'XML::RSS::Liberal' -- cannot continue [CP_MSG] [Tue Apr 25 05:18:25 2006] Module 'XML::Feed' requires 'XML::Atom' version '0.08' to be installed [CP_MSG] [Tue Apr 25 05:18:25 2006] Module 'XML::Feed' requires 'XML::RSS' version '1.01' to be installed [CP_MSG] [Tue Apr 25 05:18:33 2006] make[1]: Entering directory `/root/.cpanplus/5.8.7/build/XML-Atom-0.19' /usr/bin/perl "-Iinc" Makefile.PL --config= --installdeps=XML::LibXML,1.54,LWP::Authen::Wsse,0 *** Installing dependencies... [MSG] Checking if source files are up to date [MSG] Retrieving /root/.cpanplus/sourcefiles.2.13.stored *** Installing XML::LibXML... Running [/usr/bin/perl -MCPANPLUS::Internals::Utils::Autoflush Makefile.PL ]... enable native perl UTF8 running xml2-config... using fallback values for LIBS and INC options: LIBS='-L/usr/local/lib -L/usr/lib -lxml2 -lm' INC='-I/usr/local/include -I/usr/include' If this is wrong, Re-run as: $ /usr/bin/perl Makefile.PL LIBS='-L/path/to/lib' INC='-I/path/to/include' looking for -lxml2... no looking for -llibxml2... no libxml2 not found Try setting LIBS and INC values on the command line Or get libxml2 from http://xmlsoft.org/ If you install via RPMs, make sure you also install the -devel RPMs, as this is where the headers (.h files) are. *** XML::LibXML installation cancelled. *** Module::AutoInstall installation finished. [MSG] Writing state information back to disk. This may take a little while. [ERROR] Could not run '/usr/bin/perl Makefile.PL': enable native perl UTF8 running xml2-config... using fallback values for LIBS and INC options: LIBS='-L/usr/local/lib -L/usr/lib -lxml2 -lm' INC='-I/usr/local/include -I/usr/include' If this is wrong, Re-run as: $ /usr/bin/perl Makefile.PL LIBS='-L/path/to/lib' INC='-I/path/to/include' looking for -lxml2... no looking for -llibxml2... no libxml2 not found Try setting LIBS and INC values on the command line Or get libxml2 from http://xmlsoft.org/ If you install via RPMs, make sure you also install the -devel RPMs, as this is where the headers (.h files) are. -- cannot continue [ERROR] Unable to create a new distribution object for 'XML::LibXML' -- cannot continue Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /usr/local/share/perl/5.8.7/CPANPLUS/Backend.pm line 359 make[1]: Leaving directory `/root/.cpanplus/5.8.7/build/XML-Atom-0.19' [CP_ERROR] [Tue Apr 25 05:18:46 2006] MAKE TEST failed: Bad file descriptor make[1]: Entering directory `/root/.cpanplus/5.8.7/build/XML-Atom-0.19' /usr/bin/perl "-Iinc" Makefile.PL --config= --installdeps=XML::LibXML,1.54,LWP::Authen::Wsse,0 *** Installing dependencies... [MSG] Checking if source files are up to date [MSG] Retrieving /root/.cpanplus/sourcefiles.2.13.stored *** Installing XML::LibXML... Running [/usr/bin/perl -MCPANPLUS::Internals::Utils::Autoflush Makefile.PL ]... enable native perl UTF8 running xml2-config... using fallback values for LIBS and INC options: LIBS='-L/usr/local/lib -L/usr/lib -lxml2 -lm' INC='-I/usr/local/include -I/usr/include' If this is wrong, Re-run as: $ /usr/bin/perl Makefile.PL LIBS='-L/path/to/lib' INC='-I/path/to/include' looking for -lxml2... no looking for -llibxml2... no libxml2 not found Try setting LIBS and INC values on the command line Or get libxml2 from http://xmlsoft.org/ If you install via RPMs, make sure you also install the -devel RPMs, as this is where the headers (.h files) are. [ERROR] Could not run '/usr/bin/perl Makefile.PL': enable native perl UTF8 running xml2-config... using fallback values for LIBS and INC options: LIBS='-L/usr/local/lib -L/usr/lib -lxml2 -lm' INC='-I/usr/local/include -I/usr/include' If this is wrong, Re-run as: $ /usr/bin/perl Makefile.PL LIBS='-L/path/to/lib' INC='-I/path/to/include' looking for -lxml2... no looking for -llibxml2... no libxml2 not found Try setting LIBS and INC values on the command line Or get libxml2 from http://xmlsoft.org/ If you install via RPMs, make sure you also install the -devel RPMs, as this is where the headers (.h files) are. -- cannot continue [ERROR] Unable to create a new distribution object for 'XML::LibXML' -- cannot continue *** XML::LibXML installation cancelled. *** Module::AutoInstall installation finished. [MSG] Writing state information back to disk. This may take a little while. Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /usr/local/share/perl/5.8.7/CPANPLUS/Backend.pm line 359 PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/00-compile.t t/01-util.t t/02-content.t t/03-link.t t/04-person.t t/11-entry.t t/12-feed.t t/13-atom1.t t/14-atom1-create.t t/15-content-image.t t/16-content-binary.t t/17-renames.t t/00-compile...........ok t/01-util..............ok t/02-content...........ok t/03-link..............ok t/04-person............ok t/11-entry.............# Test 42 got: <UNDEF> (t/11-entry.t at line 87) # Expected: "Food & Drink" # t/11-entry.t line 87 is: ok($entry->get($dc->subject), 'Food & Drink'); # Test 47 got: <UNDEF> (t/11-entry.t at line 95) # Expected: "Food & Drink" # t/11-entry.t line 95 is: ok($entry2->get($dc->subject), 'Food & Drink'); # Failed test 69 in t/11-entry.t at line 149 # t/11-entry.t line 149 is: ok($entry->as_xml !~ m!<subject .*>Tech</subject>!); Couldn't open encmap euc-jp.enc: No such file or directory at /usr/lib/perl5/XML/Parser.pm line 187 dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED tests 42, 47, 69-71 Failed 5/71 tests, 92.96% okay t/12-feed..............Can't call method "get_global_pos" on an undefined value at /usr/share/perl5/XML/XPath/Node.pm line 412. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 29-31 Failed 3/31 tests, 90.32% okay t/13-atom1............. # Failed test 'atom:title' # in t/13-atom1.t at line 13. # got: undef # expected: 'dive into mark' # Failed test 'atom:version based on namespace' # in t/13-atom1.t at line 14. # got: '0.3' # expected: '1.0' # Failed test 'atom:updated' # in t/13-atom1.t at line 15. # got: undef # expected: '2005-07-11T12:29:29Z' # Failed test '2 links' # in t/13-atom1.t at line 18. # got: '0' # expected: '2' Can't call method "rel" on an undefined value at t/13-atom1.t line 48. # Looks like you planned 20 tests but only ran 5. # Looks like you failed 4 tests of 5 run. # Looks like your test died just after 5. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 2-20 Failed 19/20 tests, 5.00% okay t/14-atom1-create......ok t/15-content-image.....ok t/16-content-binary....ok t/17-renames...........Can't call method "modified" on an undefined value at t/17-renames.t line 11. # Looks like you planned 5 tests but only ran 1. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 2-5 Failed 4/5 tests, 20.00% okay Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t/11-entry.t 2 512 71 7 9.86% 42 47 69-71 t/12-feed.t 255 65280 31 6 19.35% 29-31 t/13-atom1.t 255 65280 20 34 170.00% 2-20 t/17-renames.t 255 65280 5 8 160.00% 2-5 Failed 4/12 test scripts, 66.67% okay. 31/193 subtests failed, 83.94% okay. make[1]: make[1]: Leaving directory `/root/.cpanplus/5.8.7/build/XML-Atom-0.19' *** [test_dynamic] Error 255 MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: XML::LibXML As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'Tatsuhiko Miyagawa ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'XML::LibXML' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: MIME::Base64 3.05 URI 1.35 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: -- Summary of my perl5 (revision 5 version 8 subversion 7) configuration: Platform: osname=linux, osvers=2.6.12-1-amd64-k8, archname=x86_64-linux-gnu-thread-multi uname='linux athlon 2.6.12-1-amd64-k8 #1 wed sep 28 02:31:26 cest 2005 x86_64 gnulinux ' config_args='-Dusethreads -Duselargefiles -Dccflags=-DDEBIAN -Dcccdlflags=-fPIC -Darchname=x86_64-linux-gnu -Dprefix=/usr -Dprivlib=/usr/share/perl/5.8 -Darchlib=/usr/lib/perl/5.8 -Dvendorprefix=/usr -Dvendorlib=/usr/share/perl5 -Dvendorarch=/usr/lib/perl5 -Dsiteprefix=/usr/local -Dsitelib=/usr/local/share/perl/5.8.7 -Dsitearch=/usr/local/lib/perl/5.8.7 -Dman1dir=/usr/share/man/man1 -Dman3dir=/usr/share/man/man3 -Dsiteman1dir=/usr/local/man/man1 -Dsiteman3dir=/usr/local/man/man3 -Dman1ext=1 -Dman3ext=3perl -Dpager=/usr/bin/sensible-pager -Uafs -Ud_csh -Uusesfio -Uusenm -Duseshrplib -Dlibperl=libperl.so.5.8.7 -Dd_dosuid -des' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.0.3 20051201 (prerelease) (Debian 4.0.2-5)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lgdbm -lgdbm_compat -ldb -ldl -lm -lpthread -lc -lcrypt perllibs=-ldl -lm -lpthread -lc -lcrypt libc=/lib/libc-2.3.5.so, so=so, useshrplib=true, libperl=libperl.so.5.8.7 gnulibc_version='2.3.5' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
