This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Damian Conway, This is a computer-generated error report created automatically by CPANPLUS, version 0.061. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Jun 26 20:41:08 2006] Trying to get 'http://www.cpan.org/authors/id/D/DC/DCONWAY/Perl6-Say-0.04.tar.gz' [MSG] [Mon Jun 26 20:41:10 2006] Trying to get 'http://www.cpan.org/authors/id/D/DC/DCONWAY/CHECKSUMS' [MSG] [Mon Jun 26 20:41:12 2006] Checksum matches for 'Perl6-Say-0.04.tar.gz' [MSG] [Mon Jun 26 20:41:13 2006] Extracted 'Perl6-Say-0.04/' [MSG] [Mon Jun 26 20:41:13 2006] Extracted 'Perl6-Say-0.04/Changes' [MSG] [Mon Jun 26 20:41:13 2006] Extracted 'Perl6-Say-0.04/Makefile.PL' [MSG] [Mon Jun 26 20:41:13 2006] Extracted 'Perl6-Say-0.04/MANIFEST' [MSG] [Mon Jun 26 20:41:13 2006] Extracted 'Perl6-Say-0.04/README' [MSG] [Mon Jun 26 20:41:13 2006] Extracted 'Perl6-Say-0.04/Say.pm' [MSG] [Mon Jun 26 20:41:13 2006] Extracted 'Perl6-Say-0.04/t/' [MSG] [Mon Jun 26 20:41:13 2006] Extracted 'Perl6-Say-0.04/t/1.t' [MSG] [Mon Jun 26 20:41:13 2006] Extracted 'Perl6-Say-0.04/t/export.t' [MSG] [Mon Jun 26 20:41:13 2006] Extracted 'Perl6::Say' to '/home/dpavlin/.cpanplus/5.8.8/build/Perl6-Say-0.04' [MSG] [Mon Jun 26 20:41:14 2006] Checking if your kit is complete... Looks good Writing Makefile for Perl6::Say [MSG] [Mon Jun 26 20:41:14 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Jun 26 20:41:16 2006] cp Say.pm blib/lib/Perl6/Say.pm Manifying blib/man3/Perl6::Say.3pm [ERROR] [Mon Jun 26 20:41:17 2006] MAKE TEST failed: No such file or directory PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/1.........Can't use string ("Test::Builder") as a HASH ref while "strict refs" in use at /usr/share/perl/5.8/Test/Builder.pm line 1352. 1..M can only appear at the beginning or end of tests # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 2-4 Failed 3/1 tests, -200.00% okay t/export....ok Failed Test Stat Wstat Total Fail Failed List of Failed ---------------------------------------------------------------------------------------------- t/1.t 255 65280 1 3 300.00% 2-4 Failed 1/2 test scripts, 50.00% okay. -3/3 subtests failed, 200.00% okay. make: *** [test_dynamic] Error 255 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.16.4, archname=i486-linux-gnu-thread-multi uname='linux ninsei 2.6.16.4 #1 smp preempt tue apr 11 23:28:01 pdt 2006 i686 gnulinux ' config_args='-Dusethreads -Duselargefiles -Dccflags=-DDEBIAN -Dcccdlflags=-fPIC -Darchname=i486-linux-gnu -Dprefix=/usr -Dprivlib=/usr/share/perl/5.8 -Darchlib=/usr/lib/perl/5.8 -Dvendorprefix=/usr -Dvendorlib=/usr/share/perl5 -Dvendorarch=/usr/lib/perl5 -Dsiteprefix=/usr/local -Dsitelib=/usr/local/share/perl/5.8.8 -Dsitearch=/usr/local/lib/perl/5.8.8 -Dman1dir=/usr/share/man/man1 -Dman3dir=/usr/share/man/man3 -Dsiteman1dir=/usr/local/man/man1 -Dsiteman3dir=/usr/local/man/man3 -Dman1ext=1 -Dman3ext=3perl -Dpager=/usr/bin/sensible-pager -Uafs -Ud_csh -Uusesfio -Uusenm -Duseshrplib -Dlibperl=libperl.so.5.8.8 -Dd_dosuid -des' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.1.2 20060604 (prerelease) (Debian 4.1.1-2)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lgdbm -lgdbm_compat -ldb -ldl -lm -lpthread -lc -lcrypt perllibs=-ldl -lm -lpthread -lc -lcrypt libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so.5.8.8 gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
