This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear CAPTTOFU, This is a computer-generated error report created automatically by CPANPLUS, version 0.061. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Tue Jul 18 07:24:27 2006] Trying to get 'http://www.cpan.org/authors/id/C/CA/CAPTTOFU/DBD-mysql-3.0001_1.tar.gz' [MSG] [Tue Jul 18 07:24:31 2006] Trying to get 'http://www.cpan.org/authors/id/C/CA/CAPTTOFU/CHECKSUMS' [MSG] [Tue Jul 18 07:24:32 2006] Checksum matches for 'DBD-mysql-3.0001_1.tar.gz' [MSG] [Tue Jul 18 07:24:32 2006] Extracted 'DBD-mysql-3.0001_1/' [MSG] [Tue Jul 18 07:24:33 2006] Extracted 'DBD-mysql-3.0001_1/ChangeLog' [MSG] [Tue Jul 18 07:24:33 2006] Extracted 'DBD-mysql-3.0001_1/constants.h' [MSG] [Tue Jul 18 07:24:33 2006] Extracted 'DBD-mysql-3.0001_1/dbdimp.c' [MSG] [Tue Jul 18 07:24:33 2006] Extracted 'DBD-mysql-3.0001_1/dbdimp.h' [MSG] [Tue Jul 18 07:24:33 2006] Extracted 'DBD-mysql-3.0001_1/INSTALL.html' [MSG] [Tue Jul 18 07:24:33 2006] Extracted 'DBD-mysql-3.0001_1/lib/' [MSG] [Tue Jul 18 07:24:33 2006] Extracted 'DBD-mysql-3.0001_1/lib/Bundle/' [MSG] [Tue Jul 18 07:24:33 2006] Extracted 'DBD-mysql-3.0001_1/lib/Bundle/DBD/' [MSG] [Tue Jul 18 07:24:34 2006] Extracted 'DBD-mysql-3.0001_1/lib/Bundle/DBD/mysql.pm' [MSG] [Tue Jul 18 07:24:34 2006] Extracted 'DBD-mysql-3.0001_1/lib/DBD/' [MSG] [Tue Jul 18 07:24:34 2006] Extracted 'DBD-mysql-3.0001_1/lib/DBD/mysql/' [MSG] [Tue Jul 18 07:24:34 2006] Extracted 'DBD-mysql-3.0001_1/lib/DBD/mysql/GetInfo.pm' [MSG] [Tue Jul 18 07:24:34 2006] Extracted 'DBD-mysql-3.0001_1/lib/DBD/mysql/INSTALL.pod' [MSG] [Tue Jul 18 07:24:34 2006] Extracted 'DBD-mysql-3.0001_1/lib/DBD/mysql.pm' [MSG] [Tue Jul 18 07:24:34 2006] Extracted 'DBD-mysql-3.0001_1/lib/Mysql/' [MSG] [Tue Jul 18 07:24:35 2006] Extracted 'DBD-mysql-3.0001_1/lib/Mysql/Statement.pm' [MSG] [Tue Jul 18 07:24:35 2006] Extracted 'DBD-mysql-3.0001_1/lib/Mysql.pm' [MSG] [Tue Jul 18 07:24:35 2006] Extracted 'DBD-mysql-3.0001_1/Makefile.PL' [MSG] [Tue Jul 18 07:24:35 2006] Extracted 'DBD-mysql-3.0001_1/Makefile.PL.embedded' [MSG] [Tue Jul 18 07:24:35 2006] Extracted 'DBD-mysql-3.0001_1/MANIFEST' [MSG] [Tue Jul 18 07:24:35 2006] Extracted 'DBD-mysql-3.0001_1/MANIFEST.SKIP' [MSG] [Tue Jul 18 07:24:35 2006] Extracted 'DBD-mysql-3.0001_1/META.yml' [MSG] [Tue Jul 18 07:24:36 2006] Extracted 'DBD-mysql-3.0001_1/myld' [MSG] [Tue Jul 18 07:24:36 2006] Extracted 'DBD-mysql-3.0001_1/mysql.xs' [MSG] [Tue Jul 18 07:24:36 2006] Extracted 'DBD-mysql-3.0001_1/README' [MSG] [Tue Jul 18 07:24:36 2006] Extracted 'DBD-mysql-3.0001_1/t/' [MSG] [Tue Jul 18 07:24:36 2006] Extracted 'DBD-mysql-3.0001_1/t/00base.t' [MSG] [Tue Jul 18 07:24:36 2006] Extracted 'DBD-mysql-3.0001_1/t/10dsnlist.t' [MSG] [Tue Jul 18 07:24:36 2006] Extracted 'DBD-mysql-3.0001_1/t/20createdrop.t' [MSG] [Tue Jul 18 07:24:36 2006] Extracted 'DBD-mysql-3.0001_1/t/30insertfetch.t' [MSG] [Tue Jul 18 07:24:37 2006] Extracted 'DBD-mysql-3.0001_1/t/35limit.t' [MSG] [Tue Jul 18 07:24:37 2006] Extracted 'DBD-mysql-3.0001_1/t/40bindparam.t' [MSG] [Tue Jul 18 07:24:37 2006] Extracted 'DBD-mysql-3.0001_1/t/40blobs.t' [MSG] [Tue Jul 18 07:24:37 2006] Extracted 'DBD-mysql-3.0001_1/t/40listfields.t' [MSG] [Tue Jul 18 07:24:37 2006] Extracted 'DBD-mysql-3.0001_1/t/40nulls.t' [MSG] [Tue Jul 18 07:24:37 2006] Extracted 'DBD-mysql-3.0001_1/t/40numrows.t' [MSG] [Tue Jul 18 07:24:37 2006] Extracted 'DBD-mysql-3.0001_1/t/50chopblanks.t' [MSG] [Tue Jul 18 07:24:38 2006] Extracted 'DBD-mysql-3.0001_1/t/50commit.t' [MSG] [Tue Jul 18 07:24:38 2006] Extracted 'DBD-mysql-3.0001_1/t/60leaks.t' [MSG] [Tue Jul 18 07:24:38 2006] Extracted 'DBD-mysql-3.0001_1/t/ak-dbd.t' [MSG] [Tue Jul 18 07:24:38 2006] Extracted 'DBD-mysql-3.0001_1/t/akmisc.t' [MSG] [Tue Jul 18 07:24:38 2006] Extracted 'DBD-mysql-3.0001_1/t/dbdadmin.t' [MSG] [Tue Jul 18 07:24:38 2006] Extracted 'DBD-mysql-3.0001_1/t/insertid.t' [MSG] [Tue Jul 18 07:24:38 2006] Extracted 'DBD-mysql-3.0001_1/t/lib.pl' [MSG] [Tue Jul 18 07:24:38 2006] Extracted 'DBD-mysql-3.0001_1/t/mysql.dbtest' [MSG] [Tue Jul 18 07:24:39 2006] Extracted 'DBD-mysql-3.0001_1/t/mysql.t' [MSG] [Tue Jul 18 07:24:39 2006] Extracted 'DBD-mysql-3.0001_1/t/mysql2.t' [MSG] [Tue Jul 18 07:24:39 2006] Extracted 'DBD-mysql-3.0001_1/TODO' [MSG] [Tue Jul 18 07:24:39 2006] Extracted 'DBD::mysql' to '/opt/perl/testers/.cpanplus/5.8.8/build/DBD-mysql-3.0001_1' [MSG] [Tue Jul 18 07:24:47 2006] I will use the following settings for compiling and testing: cflags (mysql_config) = -I/usr/include/mysql -g embedded (mysql_config) = libs (mysql_config) = -L/usr/lib/mysql -lmysqlclient -lz -lcrypt -lnsl -lm mysql_config (guessed ) = mysql_config nocatchstderr (default ) = 0 nofoundrows (default ) = 0 ps-protocol (default ) = 1 ssl (guessed ) = 0 testdb (default ) = test testhost (default ) = testpassword (default ) = testsocket (default ) = testuser (default ) = To change these settings, see 'perl Makefile.PL --help' and 'perldoc INSTALL'. Checking if your kit is complete... Looks good Using DBI 1.51 (for perl 5.008008 on x86_64-linux-thread-multi-ld) installed in /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.51/blib/arch/auto/DBI/ Writing Makefile for DBD::mysql [MSG] [Tue Jul 18 07:24:48 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Tue Jul 18 07:24:48 2006] Module 'DBD::mysql' requires 'DBI' version '1.08' to be installed [MSG] [Tue Jul 18 07:24:59 2006] *** You are using a perl configured with threading enabled. *** You should be aware that using multiple threads is *** not recommended for production environments. *** Note: The optional PlRPC-modules (RPC::PlServer etc) are not installed. If you want to use the DBD::Proxy driver and DBI::ProxyServer modules, then you'll need to install the RPC::PlServer, RPC::PlClient, Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you. You can install them any time after installing the DBI. You do *not* need these modules for typical DBI usage. Optional modules are available from any CPAN mirror, in particular http://search.cpan.org/ http://www.perl.com/CPAN/modules/by-module http://www.perl.org/CPAN/modules/by-module ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module Your perl was compiled with gcc (version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)), okay. Creating DBI::PurePerl test variant: t/zvpp_01basics.t Creating DBI::PurePerl test variant: t/zvpp_02dbidrv.t Creating DBI::PurePerl test variant: t/zvpp_03handle.t Creating DBI::PurePerl test variant: t/zvpp_04mods.t Creating DBI::PurePerl test variant: t/zvpp_05thrclone.t (use threads) Creating DBI::PurePerl test variant: t/zvpp_06attrs.t Creating DBI::PurePerl test variant: t/zvpp_07kids.t Creating DBI::PurePerl test variant: t/zvpp_08keeperr.t Creating DBI::PurePerl test variant: t/zvpp_09trace.t Creating DBI::PurePerl test variant: t/zvpp_10examp.t Creating DBI::PurePerl test variant: t/zvpp_11fetch.t Creating DBI::PurePerl test variant: t/zvpp_14utf8.t Creating DBI::PurePerl test variant: t/zvpp_15array.t Creating DBI::PurePerl test variant: t/zvpp_20meta.t Creating DBI::PurePerl test variant: t/zvpp_30subclass.t Creating DBI::PurePerl test variant: t/zvpp_40profile.t Creating DBI::PurePerl test variant: t/zvpp_41prof_dump.t Creating DBI::PurePerl test variant: t/zvpp_42prof_data.t Creating DBI::PurePerl test variant: t/zvpp_43profenv.t Creating DBI::PurePerl test variant: t/zvpp_50dbm.t Creating DBI::PurePerl test variant: t/zvpp_60preparse.t Creating DBI::PurePerl test variant: t/zvpp_70callbacks.t Creating DBI::PurePerl test variant: t/zvpp_72childhandles.t Creating DBI::PurePerl test variant: t/zvpp_80proxy.t I see you're using perl 5.008008 on x86_64-linux-thread-multi-ld, okay. Remember to actually *read* the README file! Use 'make' to build the software (dmake or nmake on Windows). Then 'make test' to execute self tests. Then 'make install' to install the DBI and then delete this working directory before unpacking and building any DBD::* drivers. Writing Makefile for DBI [MSG] [Tue Jul 18 07:25:06 2006] Running Mkbootstrap for DBI () Manifying blib/man1/dbiprof.1 Manifying blib/man1/dbiproxy.1 Manifying blib/man3/DBI::FAQ.3 Manifying blib/man3/DBI::SQL::Nano.3 Manifying blib/man3/DBD::Proxy.3 Manifying blib/man3/DBI::Const::GetInfo::ANSI.3 Manifying blib/man3/DBD::DBM.3 Manifying blib/man3/DBI::Const::GetInfoReturn.3 Manifying blib/man3/DBI.3 Manifying blib/man3/DBD::Sponge.3 Manifying blib/man3/DBI::Const::GetInfoType.3 Manifying blib/man3/Roadmap.3 Manifying blib/man3/DBI::DBD::Metadata.3 Manifying blib/man3/DBI::W32ODBC.3 Manifying blib/man3/DBI::Const::GetInfo::ODBC.3 Manifying blib/man3/DBI::ProfileDumper::Apache.3 Manifying blib/man3/Bundle::DBI.3 Manifying blib/man3/DBI::Profile.3 Manifying blib/man3/DBD::File.3 Manifying blib/man3/DBI::ProfileDumper.3 Manifying blib/man3/DBI::ProxyServer.3 Manifying blib/man3/DBI::DBD.3 Manifying blib/man3/Win32::DBIODBC.3 Manifying blib/man3/DBI::PurePerl.3 Manifying blib/man3/DBI::ProfileData.3 [MSG] [Tue Jul 18 07:25:20 2006] MAKE TEST passed: t/01basics...............ok 4/131 skipped: developer tests t/02dbidrv...............ok t/03handle...............ok t/04mods.................ok t/05thrclone.............ok t/06attrs................ok t/07kids.................ok t/08keeperr..............ok t/09trace................ok t/10examp................ok t/11fetch................ok t/14utf8.................ok t/15array................ok t/20meta.................ok t/30subclass.............ok t/40profile..............ok t/41prof_dump............ok t/42prof_data............ok t/43profenv..............ok t/50dbm..................ok t/60preparse.............ok t/70callbacks............ok t/72childhandles.........ok t/80proxy................skipped all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm) t/pod....................ok t/zvpp_01basics..........ok 4/131 skipped: developer tests t/zvpp_02dbidrv..........ok 10/51 skipped: various reasons t/zvpp_03handle..........ok 76/137 skipped: various reasons t/zvpp_04mods............ok t/zvpp_05thrclone........ok t/zvpp_06attrs...........ok 7/137 skipped: various reasons t/zvpp_07kids............skipped all skipped: $h->{Kids} attribute not supported for DBI::PurePerl t/zvpp_08keeperr.........ok t/zvpp_09trace...........ok t/zvpp_10examp...........ok 39/263 skipped: various reasons t/zvpp_11fetch...........ok t/zvpp_14utf8............ok t/zvpp_15array...........ok t/zvpp_20meta............ok t/zvpp_30subclass........ok t/zvpp_40profile.........skipped all skipped: profiling not supported for DBI::PurePerl t/zvpp_41prof_dump.......skipped all skipped: profiling not supported for DBI::PurePerl t/zvpp_42prof_data.......skipped all skipped: profiling not supported for DBI::PurePerl t/zvpp_43profenv.........skipped all skipped: profiling not supported for DBI::PurePerl t/zvpp_50dbm.............ok t/zvpp_60preparse........skipped all skipped: preparse not supported for DBI::PurePerl t/zvpp_70callbacks.......skipped all skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl t/zvpp_72childhandles....ok t/zvpp_80proxy...........skipped all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm) All tests successful, 9 tests and 140 subtests skipped. Files=49, Tests=2339, 12 wallclock secs ( 8.29 cusr + 3.90 csys = 12.19 CPU) test.pl DBI test application $Revision: 11.7 $ Switch: DBI 1.51 by Tim Bunce, 1.51 Available Drivers: DBM, ExampleP, File, Pg, Proxy, SQLite, Sponge, mysql dbi:ExampleP:: testing 5 sets of 20 connections: Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Made 100 connections in 0 wallclock secs ( 0.01 usr + 0.00 sys = 0.01 CPU) Testing handle creation speed... 20408 NullP sth/s perl 5.008008 x86_64-linux-thread-multi-ld (gcc 3.4.4 -g -O3) test.pl done [MSG] [Tue Jul 18 07:25:21 2006] Ok, not sending test report [MSG] [Tue Jul 18 07:25:28 2006] cp lib/DBD/mysql.pm blib/lib/DBD/mysql.pm cp lib/DBD/mysql/GetInfo.pm blib/lib/DBD/mysql/GetInfo.pm cp lib/Mysql.pm blib/lib/Mysql.pm cp lib/DBD/mysql/INSTALL.pod blib/lib/DBD/mysql/INSTALL.pod cp lib/Mysql/Statement.pm blib/lib/Mysql/Statement.pm cp lib/Bundle/DBD/mysql.pm blib/lib/Bundle/DBD/mysql.pm Warning: duplicate function definition 'do' detected in mysql.xs, line 224 Warning: duplicate function definition 'rows' detected in mysql.xs, line 559 mysql.xs: In function `XS_DBD__mysql__GetInfo_dbd_mysql_get_info': mysql.xs:639: warning: ignoring return value of `Perl_newSViv', declared with attribute warn_unused_result mysql.xs:642: warning: ignoring return value of `Perl_newSViv', declared with attribute warn_unused_result mysql.xs:645: warning: ignoring return value of `Perl_newSVpv', declared with attribute warn_unused_result Running Mkbootstrap for DBD::mysql () Manifying blib/man3/DBD::mysql.3 Manifying blib/man3/DBD::mysql::INSTALL.3 Manifying blib/man3/Mysql.3 Manifying blib/man3/Bundle::DBD::mysql.3 [ERROR] [Tue Jul 18 07:25:37 2006] MAKE TEST failed: [EMAIL PROTECTED] t/00base...........ok t/10dsnlist........DBI connect('test:mysql_server_prepare=1;','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/10dsnlist.t line 45 Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO) Either your server is not up and running or you have no permissions for acessing the DSN DBI:mysql:test:mysql_server_prepare=1;. This test requires a running server and write permissions. Please make sure your server is running and you have permissions, then retry. dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-3 Failed 3/3 tests, 0.00% okay t/20createdrop.....DBI connect('test:mysql_server_prepare=1;','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/20createdrop.t line 45 Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO) Either your server is not up and running or you have no permissions for acessing the DSN DBI:mysql:test:mysql_server_prepare=1;. This test requires a running server and write permissions. Please make sure your server is running and you have permissions, then retry. dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-5 Failed 5/5 tests, 0.00% okay t/30insertfetch....DBI connect('test:mysql_server_prepare=1;','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/30insertfetch.t line 48 Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO) Either your server is not up and running or you have no permissions for acessing the DSN DBI:mysql:test:mysql_server_prepare=1;. This test requires a running server and write permissions. Please make sure your server is running and you have permissions, then retry. dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-11 Failed 11/11 tests, 0.00% okay t/35limit..........DBI connect('test:mysql_server_prepare=1;','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/35limit.t line 50 Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO) Either your server is not up and running or you have no permissions for acessing the DSN DBI:mysql:test:mysql_server_prepare=1;. This test requires a running server and write permissions. Please make sure your server is running and you have permissions, then retry. dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-113 Failed 113/113 tests, 0.00% okay t/40bindparam......DBI connect('test:mysql_server_prepare=1;','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40bindparam.t line 64 Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO) Either your server is not up and running or you have no permissions for acessing the DSN DBI:mysql:test:mysql_server_prepare=1;. This test requires a running server and write permissions. Please make sure your server is running and you have permissions, then retry. dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-27 Failed 27/27 tests, 0.00% okay t/40blobs..........DBI connect('test:mysql_server_prepare=1;','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40blobs.t line 68 Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO) Either your server is not up and running or you have no permissions for acessing the DSN DBI:mysql:test:mysql_server_prepare=1;. This test requires a running server and write permissions. Please make sure your server is running and you have permissions, then retry. dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-11 Failed 11/11 tests, 0.00% okay t/40listfields.....DBI connect('test:mysql_server_prepare=1;','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40listfields.t line 57 Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO) Either your server is not up and running or you have no permissions for acessing the DSN DBI:mysql:test:mysql_server_prepare=1;. This test requires a running server and write permissions. Please make sure your server is running and you have permissions, then retry. dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-18 Failed 18/18 tests, 0.00% okay t/40nulls..........DBI connect('test:mysql_server_prepare=1;','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40nulls.t line 50 Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO) Either your server is not up and running or you have no permissions for acessing the DSN DBI:mysql:test:mysql_server_prepare=1;. This test requires a running server and write permissions. Please make sure your server is running and you have permissions, then retry. dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-11 Failed 11/11 tests, 0.00% okay t/40numrows........DBI connect('test:mysql_server_prepare=1;','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40numrows.t line 59 Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO) Either your server is not up and running or you have no permissions for acessing the DSN DBI:mysql:test:mysql_server_prepare=1;. This test requires a running server and write permissions. Please make sure your server is running and you have permissions, then retry. dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-25 Failed 25/25 tests, 0.00% okay t/50chopblanks.....DBI connect('test:mysql_server_prepare=1;','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/50chopblanks.t line 57 Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO) Either your server is not up and running or you have no permissions for acessing the DSN DBI:mysql:test:mysql_server_prepare=1;. This test requires a running server and write permissions. Please make sure your server is running and you have permissions, then retry. dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-35 Failed 35/35 tests, 0.00% okay t/50commit.........DBI connect('test:mysql_server_prepare=1;','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/50commit.t line 64 Can't call method "tables" on an undefined value at t/lib.pl line 216. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-30 Failed 30/30 tests, 0.00% okay t/60leaks..........skipped all skipped: $ENV{SLOW_TESTS} is not set or Proc::ProcessTable not installed t/ak-dbd...........DBI connect('test:mysql_server_prepare=1;','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/ak-dbd.t line 59 Can't call method "tables" on an undefined value at t/lib.pl line 216. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1, 4-90 Failed 88/90 tests, 2.22% okay t/akmisc...........Mysql connect('database=test;host=','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/akmisc.t line 140 Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO) It looks as if your server is not up and running. This test requires a running server. Please make sure your server is running and retry. dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-351 Failed 351/351 tests, 0.00% okay t/dbdadmin.........DBI connect('test:mysql_server_prepare=1;','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/dbdadmin.t line 74 Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO) Either your server is not up and running or you have no permissions for acessing the DSN DBI:mysql:test:mysql_server_prepare=1;. This test requires a running server and write permissions. Please make sure your server is running and you have permissions, then retry. dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-21 Failed 21/21 tests, 0.00% okay t/insertid.........DBI connect('test:mysql_server_prepare=1;','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/insertid.t line 13 dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-12 Failed 12/12 tests, 0.00% okay t/mysql............Mysql connect('database=test;host=','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/mysql.t line 55 not ok 1: Access denied for user 'imacat'@'localhost' (using password: NO) It looks as if your server is not up and running. This test requires a running server. Please make sure your server is running and retry. FAILED before any test output arrived t/mysql2...........Mysql connect('database=test;host=','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/mysql2.t line 29 Can't call method "getserverinfo" on an undefined value at t/mysql2.t line 30. dubious Test returned status 255 (wstat 65280, 0xff00) Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t/10dsnlist.t 10 2560 3 5 166.67% 1-3 t/20createdrop.t 10 2560 5 9 180.00% 1-5 t/30insertfetch.t 10 2560 11 21 190.91% 1-11 t/35limit.t 10 2560 113 225 199.12% 1-113 t/40bindparam.t 10 2560 27 53 196.30% 1-27 t/40blobs.t 10 2560 11 21 190.91% 1-11 t/40listfields.t 10 2560 18 35 194.44% 1-18 t/40nulls.t 10 2560 11 21 190.91% 1-11 t/40numrows.t 10 2560 25 49 196.00% 1-25 t/50chopblanks.t 10 2560 35 69 197.14% 1-35 t/50commit.t 255 65280 30 59 196.67% 1-30 t/ak-dbd.t 255 65280 90 175 194.44% 1 4-90 t/akmisc.t 10 2560 351 701 199.72% 1-351 t/dbdadmin.t 10 2560 21 41 195.24% 1-21 t/insertid.t 255 65280 12 24 200.00% 1-12 t/mysql.t ?? ?? % ?? t/mysql2.t 255 65280 ?? ?? % ?? 1 test skipped. Failed 17/19 test scripts, 10.53% okay. 829/836 subtests failed, 0.84% okay. make: *** [test_dynamic] Error 255 PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: DBI 0 Data::Dumper 2.121_08 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.16.14, archname=x86_64-linux-thread-multi-ld uname='linux rinse 2.6.16.14 #1 smp mon may 8 23:44:32 cst 2006 x86_64 gnulinux ' config_args='-s -d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true [EMAIL PROTECTED]' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g -O3', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.4 20050314 (prerelease) (Debian 3.4.3-13)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8 alignbytes=16, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.2.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.2' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE' cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
