This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear DARNOLD, This is a computer-generated error report created automatically by CPANPLUS, version 0.072. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Tue Jul 25 17:44:46 2006] Trying to get 'http://www.cpan.org/authors/id/D/DA/DARNOLD/DBIx-Threaded-0.10.tar.gz' [MSG] [Tue Jul 25 17:44:48 2006] Trying to get 'http://www.cpan.org/authors/id/D/DA/DARNOLD/CHECKSUMS' [MSG] [Tue Jul 25 17:44:49 2006] Checksum matches for 'DBIx-Threaded-0.10.tar.gz' [MSG] [Tue Jul 25 17:44:50 2006] Extracted 'DBIx-Threaded-0.10-RC1' [MSG] [Tue Jul 25 17:44:50 2006] Extracted 'DBIx-Threaded-0.10-RC1/Changes.txt' [MSG] [Tue Jul 25 17:44:50 2006] Extracted 'DBIx-Threaded-0.10-RC1/lib' [MSG] [Tue Jul 25 17:44:50 2006] Extracted 'DBIx-Threaded-0.10-RC1/lib/DBIx' [MSG] [Tue Jul 25 17:44:50 2006] Extracted 'DBIx-Threaded-0.10-RC1/lib/DBIx/Threaded' [MSG] [Tue Jul 25 17:44:50 2006] Extracted 'DBIx-Threaded-0.10-RC1/lib/DBIx/Threaded/Server.pm' [MSG] [Tue Jul 25 17:44:50 2006] Extracted 'DBIx-Threaded-0.10-RC1/lib/DBIx/Threaded.pm' [MSG] [Tue Jul 25 17:44:50 2006] Extracted 'DBIx-Threaded-0.10-RC1/Makefile.PL' [MSG] [Tue Jul 25 17:44:50 2006] Extracted 'DBIx-Threaded-0.10-RC1/MANIFEST' [MSG] [Tue Jul 25 17:44:50 2006] Extracted 'DBIx-Threaded-0.10-RC1/t' [MSG] [Tue Jul 25 17:44:50 2006] Extracted 'DBIx-Threaded-0.10-RC1/t/test.t' [MSG] [Tue Jul 25 17:44:50 2006] Extracted 'DBIx-Threaded-0.10-RC1/TODO.txt' [MSG] [Tue Jul 25 17:44:51 2006] Extracted 'DBIx::Threaded' to '/opt/perl/testers/.cpanplus/5.8.8/build/DBIx-Threaded-0.10-RC1' [MSG] [Tue Jul 25 17:44:51 2006] Configuring DBIx::Threaded ... >>> Remember to actually *READ* the README file! And re-read it if you have any problems. Checking for DBI, 1.48 or later ... ok Checking for Thread::Queue::Duplex, 0.12 or later ... You don't have the Thread::Queue::Duplex package version 0.12 or later, installed. Missing modules are available from CPAN (search.cpan.org) Checking if your kit is complete... Looks good Warning: prerequisite Thread::Queue::Duplex 0.12 not found. Writing Makefile for DBIx::Threaded [MSG] [Tue Jul 25 17:44:51 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Tue Jul 25 17:44:51 2006] Module 'DBIx::Threaded' requires 'DBI' version '1.48' to be installed [MSG] [Tue Jul 25 17:44:52 2006] Module 'DBIx::Threaded' requires 'Thread::Queue::Duplex' version '0.12' to be installed [MSG] [Tue Jul 25 17:45:02 2006] *** You are using a perl configured with threading enabled. *** You should be aware that using multiple threads is *** not recommended for production environments. *** Note: The optional PlRPC-modules (RPC::PlServer etc) are not installed. If you want to use the DBD::Proxy driver and DBI::ProxyServer modules, then you'll need to install the RPC::PlServer, RPC::PlClient, Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you. You can install them any time after installing the DBI. You do *not* need these modules for typical DBI usage. Optional modules are available from any CPAN mirror, in particular http://search.cpan.org/ http://www.perl.com/CPAN/modules/by-module http://www.perl.org/CPAN/modules/by-module ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module Your perl was compiled with gcc (version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)), okay. Creating DBI::PurePerl test variant: t/zvpp_01basics.t Creating DBI::PurePerl test variant: t/zvpp_02dbidrv.t Creating DBI::PurePerl test variant: t/zvpp_03handle.t Creating DBI::PurePerl test variant: t/zvpp_04mods.t Creating DBI::PurePerl test variant: t/zvpp_05thrclone.t (use threads) Creating DBI::PurePerl test variant: t/zvpp_06attrs.t Creating DBI::PurePerl test variant: t/zvpp_07kids.t Creating DBI::PurePerl test variant: t/zvpp_08keeperr.t Creating DBI::PurePerl test variant: t/zvpp_09trace.t Creating DBI::PurePerl test variant: t/zvpp_10examp.t Creating DBI::PurePerl test variant: t/zvpp_11fetch.t Creating DBI::PurePerl test variant: t/zvpp_14utf8.t Creating DBI::PurePerl test variant: t/zvpp_15array.t Creating DBI::PurePerl test variant: t/zvpp_20meta.t Creating DBI::PurePerl test variant: t/zvpp_30subclass.t Creating DBI::PurePerl test variant: t/zvpp_40profile.t Creating DBI::PurePerl test variant: t/zvpp_41prof_dump.t Creating DBI::PurePerl test variant: t/zvpp_42prof_data.t Creating DBI::PurePerl test variant: t/zvpp_43profenv.t Creating DBI::PurePerl test variant: t/zvpp_50dbm.t Creating DBI::PurePerl test variant: t/zvpp_60preparse.t Creating DBI::PurePerl test variant: t/zvpp_70callbacks.t Creating DBI::PurePerl test variant: t/zvpp_72childhandles.t Creating DBI::PurePerl test variant: t/zvpp_80proxy.t I see you're using perl 5.008008 on x86_64-linux-thread-multi-ld, okay. Remember to actually *read* the README file! Use 'make' to build the software (dmake or nmake on Windows). Then 'make test' to execute self tests. Then 'make install' to install the DBI and then delete this working directory before unpacking and building any DBD::* drivers. Writing Makefile for DBI [MSG] [Tue Jul 25 17:45:09 2006] Running Mkbootstrap for DBI () Manifying blib/man1/dbiprof.1 Manifying blib/man1/dbiproxy.1 Manifying blib/man3/DBI::FAQ.3 Manifying blib/man3/DBI::SQL::Nano.3 Manifying blib/man3/DBD::Proxy.3 Manifying blib/man3/DBI::Const::GetInfo::ANSI.3 Manifying blib/man3/DBD::DBM.3 Manifying blib/man3/DBI::Const::GetInfoReturn.3 Manifying blib/man3/DBI.3 Manifying blib/man3/DBD::Sponge.3 Manifying blib/man3/DBI::Const::GetInfoType.3 Manifying blib/man3/Roadmap.3 Manifying blib/man3/DBI::DBD::Metadata.3 Manifying blib/man3/DBI::W32ODBC.3 Manifying blib/man3/DBI::Const::GetInfo::ODBC.3 Manifying blib/man3/DBI::ProfileDumper::Apache.3 Manifying blib/man3/Bundle::DBI.3 Manifying blib/man3/DBI::Profile.3 Manifying blib/man3/DBD::File.3 Manifying blib/man3/DBI::ProfileDumper.3 Manifying blib/man3/DBI::ProxyServer.3 Manifying blib/man3/DBI::DBD.3 Manifying blib/man3/Win32::DBIODBC.3 Manifying blib/man3/DBI::PurePerl.3 Manifying blib/man3/DBI::ProfileData.3 [MSG] [Tue Jul 25 17:45:23 2006] MAKE TEST passed: t/01basics...............ok 4/131 skipped: developer tests t/02dbidrv...............ok t/03handle...............ok t/04mods.................ok t/05thrclone.............ok t/06attrs................ok t/07kids.................ok t/08keeperr..............ok t/09trace................ok t/10examp................ok t/11fetch................ok t/14utf8.................ok t/15array................ok t/20meta.................ok t/30subclass.............ok t/40profile..............ok t/41prof_dump............ok t/42prof_data............ok t/43profenv..............ok t/50dbm..................ok t/60preparse.............ok t/70callbacks............ok t/72childhandles.........ok t/80proxy................skipped all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm) t/pod....................ok t/zvpp_01basics..........ok 4/131 skipped: developer tests t/zvpp_02dbidrv..........ok 10/51 skipped: various reasons t/zvpp_03handle..........ok 76/137 skipped: various reasons t/zvpp_04mods............ok t/zvpp_05thrclone........ok t/zvpp_06attrs...........ok 7/137 skipped: various reasons t/zvpp_07kids............skipped all skipped: $h->{Kids} attribute not supported for DBI::PurePerl t/zvpp_08keeperr.........ok t/zvpp_09trace...........ok t/zvpp_10examp...........ok 39/263 skipped: various reasons t/zvpp_11fetch...........ok t/zvpp_14utf8............ok t/zvpp_15array...........ok t/zvpp_20meta............ok t/zvpp_30subclass........ok t/zvpp_40profile.........skipped all skipped: profiling not supported for DBI::PurePerl t/zvpp_41prof_dump.......skipped all skipped: profiling not supported for DBI::PurePerl t/zvpp_42prof_data.......skipped all skipped: profiling not supported for DBI::PurePerl t/zvpp_43profenv.........skipped all skipped: profiling not supported for DBI::PurePerl t/zvpp_50dbm.............ok t/zvpp_60preparse........skipped all skipped: preparse not supported for DBI::PurePerl t/zvpp_70callbacks.......skipped all skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl t/zvpp_72childhandles....ok t/zvpp_80proxy...........skipped all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm) All tests successful, 9 tests and 140 subtests skipped. Files=49, Tests=2339, 13 wallclock secs ( 8.37 cusr + 4.43 csys = 12.80 CPU) test.pl DBI test application $Revision: 11.7 $ Switch: DBI 1.51 by Tim Bunce, 1.51 Available Drivers: DBM, ExampleP, File, Proxy, Sponge dbi:ExampleP:: testing 5 sets of 20 connections: Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Made 100 connections in 0 wallclock secs ( 0.03 usr + 0.00 sys = 0.03 CPU) Testing handle creation speed... 20833 NullP sth/s perl 5.008008 x86_64-linux-thread-multi-ld (gcc 3.4.4 -g -O3) test.pl done [MSG] [Tue Jul 25 17:45:24 2006] Ok, not sending test report [MSG] [Tue Jul 25 17:45:24 2006] Trying to get 'http://www.cpan.org/authors/id/D/DA/DARNOLD/Thread-Queue-Duplex-0.92.tar.gz' [MSG] [Tue Jul 25 17:45:25 2006] Trying to get 'http://www.cpan.org/authors/id/D/DA/DARNOLD/CHECKSUMS' [MSG] [Tue Jul 25 17:45:27 2006] Checksum matches for 'Thread-Queue-Duplex-0.92.tar.gz' [MSG] [Tue Jul 25 17:45:27 2006] Extracted 'Thread-Queue-Duplex-0.92' [MSG] [Tue Jul 25 17:45:27 2006] Extracted 'Thread-Queue-Duplex-0.92/Changes.txt' [MSG] [Tue Jul 25 17:45:27 2006] Extracted 'Thread-Queue-Duplex-0.92/classdocs' [MSG] [Tue Jul 25 17:45:27 2006] Extracted 'Thread-Queue-Duplex-0.92/classdocs/index.html' [MSG] [Tue Jul 25 17:45:28 2006] Extracted 'Thread-Queue-Duplex-0.92/classdocs/podstyle.css' [MSG] [Tue Jul 25 17:45:28 2006] Extracted 'Thread-Queue-Duplex-0.92/classdocs/Thread' [MSG] [Tue Jul 25 17:45:28 2006] Extracted 'Thread-Queue-Duplex-0.92/classdocs/Thread/Queue' [MSG] [Tue Jul 25 17:45:28 2006] Extracted 'Thread-Queue-Duplex-0.92/classdocs/Thread/Queue/Duplex.html' [MSG] [Tue Jul 25 17:45:28 2006] Extracted 'Thread-Queue-Duplex-0.92/classdocs/Thread/Queue/Duplex.pod.html' [MSG] [Tue Jul 25 17:45:28 2006] Extracted 'Thread-Queue-Duplex-0.92/classdocs/Thread/Queue/Queueable.html' [MSG] [Tue Jul 25 17:45:28 2006] Extracted 'Thread-Queue-Duplex-0.92/classdocs/Thread/Queue/Queueable.pod.html' [MSG] [Tue Jul 25 17:45:28 2006] Extracted 'Thread-Queue-Duplex-0.92/classdocs/Thread/Queue/TQDContainer.html' [MSG] [Tue Jul 25 17:45:28 2006] Extracted 'Thread-Queue-Duplex-0.92/classdocs/up.gif' [MSG] [Tue Jul 25 17:45:28 2006] Extracted 'Thread-Queue-Duplex-0.92/lib' [MSG] [Tue Jul 25 17:45:28 2006] Extracted 'Thread-Queue-Duplex-0.92/lib/Thread' [MSG] [Tue Jul 25 17:45:28 2006] Extracted 'Thread-Queue-Duplex-0.92/lib/Thread/Queue' [MSG] [Tue Jul 25 17:45:28 2006] Extracted 'Thread-Queue-Duplex-0.92/lib/Thread/Queue/Duplex.pm' [MSG] [Tue Jul 25 17:45:29 2006] Extracted 'Thread-Queue-Duplex-0.92/lib/Thread/Queue/Duplex.pod' [MSG] [Tue Jul 25 17:45:29 2006] Extracted 'Thread-Queue-Duplex-0.92/lib/Thread/Queue/Queueable.pm' [MSG] [Tue Jul 25 17:45:29 2006] Extracted 'Thread-Queue-Duplex-0.92/lib/Thread/Queue/Queueable.pod' [MSG] [Tue Jul 25 17:45:29 2006] Extracted 'Thread-Queue-Duplex-0.92/lib/Thread/Queue/TQDContainer.pm' [MSG] [Tue Jul 25 17:45:29 2006] Extracted 'Thread-Queue-Duplex-0.92/License.txt' [MSG] [Tue Jul 25 17:45:29 2006] Extracted 'Thread-Queue-Duplex-0.92/Makefile.PL' [MSG] [Tue Jul 25 17:45:29 2006] Extracted 'Thread-Queue-Duplex-0.92/MANIFEST' [MSG] [Tue Jul 25 17:45:29 2006] Extracted 'Thread-Queue-Duplex-0.92/t' [MSG] [Tue Jul 25 17:45:29 2006] Extracted 'Thread-Queue-Duplex-0.92/t/01test.t' [MSG] [Tue Jul 25 17:45:29 2006] Extracted 'Thread::Queue::Duplex' to '/opt/perl/testers/.cpanplus/5.8.8/build/Thread-Queue-Duplex-0.92' [MSG] [Tue Jul 25 17:45:30 2006] Configuring Thread::Queue::Duplex ... Checking if your kit is complete... Looks good Writing Makefile for Thread::Queue::Duplex [MSG] [Tue Jul 25 17:45:30 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Tue Jul 25 17:45:32 2006] cp lib/Thread/Queue/Duplex.pm blib/lib/Thread/Queue/Duplex.pm cp lib/Thread/Queue/Duplex.pod blib/lib/Thread/Queue/Duplex.pod cp lib/Thread/Queue/Queueable.pod blib/lib/Thread/Queue/Queueable.pod cp lib/Thread/Queue/Queueable.pm blib/lib/Thread/Queue/Queueable.pm cp lib/Thread/Queue/TQDContainer.pm blib/lib/Thread/Queue/TQDContainer.pm Manifying blib/man3/Thread::Queue::Queueable.3 Manifying blib/man3/Thread::Queue::Duplex.3 [MSG] [Tue Jul 25 17:47:29 2006] MAKE TEST passed: t/01test....Note: some tests have significant delays... ok All tests successful. Files=1, Tests=80, 116 wallclock secs ( 0.07 cusr + 0.08 csys = 0.15 CPU) [MSG] [Tue Jul 25 17:47:35 2006] Successfully sent 'pass' report for 'Thread-Queue-Duplex-0.92' [MSG] [Tue Jul 25 17:47:38 2006] cp lib/DBIx/Threaded.pm blib/lib/DBIx/Threaded.pm cp lib/DBIx/Threaded/Server.pm blib/lib/DBIx/Threaded/Server.pm Manifying blib/man3/DBIx::Threaded::Server.3 Manifying blib/man3/DBIx::Threaded.3 [ERROR] [Tue Jul 25 17:47:39 2006] MAKE TEST failed: [EMAIL PROTECTED] t/test....No DSN defined (you need to set DBIX_THRD_DSN) A thread exited while 3 threads were running. dubious Test returned status 29 (wstat 7424, 0x1d00) DIED. FAILED tests 2-72 Failed 71/72 tests, 1.39% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/test.t 29 7424 72 141 2-72 Failed 1/1 test scripts. 71/72 subtests failed. Files=1, Tests=72, 1 wallclock secs ( 0.15 cusr + 0.16 csys = 0.31 CPU) Failed 1/1 test programs. 71/72 subtests failed. make: *** [test_dynamic] Error 29 PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: DBI 1.51 Thread::Queue::Duplex 0.92 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.16.14, archname=x86_64-linux-thread-multi-ld uname='linux rinse 2.6.16.14 #1 smp mon may 8 23:44:32 cst 2006 x86_64 gnulinux ' config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true [EMAIL PROTECTED]' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g -O3', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.4 20050314 (prerelease) (Debian 3.4.3-13)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8 alignbytes=16, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.2.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.2' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE' cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
