This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear NIKC, This is a computer-generated error report created automatically by CPANPLUS, version 0.072. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Wed Jul 26 11:24:43 2006] Trying to get 'http://www.cpan.org/authors/id/N/NI/NIKC/Test-Unix-User-0.02.tar.gz' [MSG] [Wed Jul 26 11:24:44 2006] Trying to get 'http://www.cpan.org/authors/id/N/NI/NIKC/CHECKSUMS' [MSG] [Wed Jul 26 11:24:46 2006] Checksum matches for 'Test-Unix-User-0.02.tar.gz' [MSG] [Wed Jul 26 11:24:46 2006] Extracted 'Test-Unix-User-0.02' [MSG] [Wed Jul 26 11:24:46 2006] Extracted 'Test-Unix-User-0.02/META.yml' [MSG] [Wed Jul 26 11:24:46 2006] Extracted 'Test-Unix-User-0.02/t' [MSG] [Wed Jul 26 11:24:46 2006] Extracted 'Test-Unix-User-0.02/Changes' [MSG] [Wed Jul 26 11:24:46 2006] Extracted 'Test-Unix-User-0.02/MANIFEST' [MSG] [Wed Jul 26 11:24:46 2006] Extracted 'Test-Unix-User-0.02/lib' [MSG] [Wed Jul 26 11:24:46 2006] Extracted 'Test-Unix-User-0.02/Makefile.PL' [MSG] [Wed Jul 26 11:24:46 2006] Extracted 'Test-Unix-User-0.02/Build.PL' [MSG] [Wed Jul 26 11:24:47 2006] Extracted 'Test-Unix-User-0.02/README' [MSG] [Wed Jul 26 11:24:47 2006] Extracted 'Test-Unix-User-0.02/SIGNATURE' [MSG] [Wed Jul 26 11:24:47 2006] Extracted 'Test-Unix-User-0.02/lib/Test' [MSG] [Wed Jul 26 11:24:47 2006] Extracted 'Test-Unix-User-0.02/lib/Test/Unix' [MSG] [Wed Jul 26 11:24:47 2006] Extracted 'Test-Unix-User-0.02/lib/Test/Unix/User.pm' [MSG] [Wed Jul 26 11:24:47 2006] Extracted 'Test-Unix-User-0.02/t/02-homedir_ok.t' [MSG] [Wed Jul 26 11:24:47 2006] Extracted 'Test-Unix-User-0.02/t/pod-coverage.t' [MSG] [Wed Jul 26 11:24:47 2006] Extracted 'Test-Unix-User-0.02/t/00-load.t' [MSG] [Wed Jul 26 11:24:47 2006] Extracted 'Test-Unix-User-0.02/t/pod.t' [MSG] [Wed Jul 26 11:24:47 2006] Extracted 'Test-Unix-User-0.02/t/01-user_ok.t' [MSG] [Wed Jul 26 11:24:47 2006] Extracted 'Test::Unix::User' to '/opt/perl/testers/.cpanplus/5.8.8/build/Test-Unix-User-0.02' [MSG] [Wed Jul 26 11:24:48 2006] # running Build.PL /opt/perl/testers/bin/perl Build.PL - ERROR: Test::Tester is not installed ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions of the modules indicated above before proceeding with this installation Checking whether your kit is complete... Looks good Checking prerequisites... Creating new 'Build' script for 'Test-Unix-User' version '0.02' [MSG] [Wed Jul 26 11:24:48 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Wed Jul 26 11:24:48 2006] Module 'Test::Unix::User' requires 'Test::Tester' version '0.102' to be installed [MSG] [Wed Jul 26 11:24:48 2006] Trying to get 'http://www.cpan.org/authors/id/F/FD/FDALY/Test-Tester-0.103.tar.gz' [MSG] [Wed Jul 26 11:24:50 2006] Trying to get 'http://www.cpan.org/authors/id/F/FD/FDALY/CHECKSUMS' [MSG] [Wed Jul 26 11:24:51 2006] Checksum matches for 'Test-Tester-0.103.tar.gz' [MSG] [Wed Jul 26 11:24:52 2006] Extracted 'Test-Tester-0.103/' [MSG] [Wed Jul 26 11:24:52 2006] Extracted 'Test-Tester-0.103/Makefile.PL' [MSG] [Wed Jul 26 11:24:52 2006] Extracted 'Test-Tester-0.103/META.yml' [MSG] [Wed Jul 26 11:24:52 2006] Extracted 'Test-Tester-0.103/t/' [MSG] [Wed Jul 26 11:24:52 2006] Extracted 'Test-Tester-0.103/t/fail/' [MSG] [Wed Jul 26 11:24:52 2006] Extracted 'Test-Tester-0.103/t/fail/fail.t' [MSG] [Wed Jul 26 11:24:52 2006] Extracted 'Test-Tester-0.103/t/MyTest.pm' [MSG] [Wed Jul 26 11:24:52 2006] Extracted 'Test-Tester-0.103/t/run_test.t' [MSG] [Wed Jul 26 11:24:52 2006] Extracted 'Test-Tester-0.103/t/capture.t' [MSG] [Wed Jul 26 11:24:53 2006] Extracted 'Test-Tester-0.103/t/auto.t' [MSG] [Wed Jul 26 11:24:53 2006] Extracted 'Test-Tester-0.103/t/check_tests.t' [MSG] [Wed Jul 26 11:24:53 2006] Extracted 'Test-Tester-0.103/t/SmallTest.pm' [MSG] [Wed Jul 26 11:24:53 2006] Extracted 'Test-Tester-0.103/t/depth.t' [MSG] [Wed Jul 26 11:24:53 2006] Extracted 'Test-Tester-0.103/CHANGES' [MSG] [Wed Jul 26 11:24:53 2006] Extracted 'Test-Tester-0.103/README' [MSG] [Wed Jul 26 11:24:53 2006] Extracted 'Test-Tester-0.103/lib/' [MSG] [Wed Jul 26 11:24:53 2006] Extracted 'Test-Tester-0.103/lib/Test/' [MSG] [Wed Jul 26 11:24:53 2006] Extracted 'Test-Tester-0.103/lib/Test/Tester/' [MSG] [Wed Jul 26 11:24:53 2006] Extracted 'Test-Tester-0.103/lib/Test/Tester/CaptureRunner.pm' [MSG] [Wed Jul 26 11:24:53 2006] Extracted 'Test-Tester-0.103/lib/Test/Tester/Delegate.pm' [MSG] [Wed Jul 26 11:24:53 2006] Extracted 'Test-Tester-0.103/lib/Test/Tester/Capture.pm' [MSG] [Wed Jul 26 11:24:53 2006] Extracted 'Test-Tester-0.103/lib/Test/Tester.pm' [MSG] [Wed Jul 26 11:24:54 2006] Extracted 'Test-Tester-0.103/TODO' [MSG] [Wed Jul 26 11:24:54 2006] Extracted 'Test-Tester-0.103/ARTISTIC' [MSG] [Wed Jul 26 11:24:54 2006] Extracted 'Test-Tester-0.103/MANIFEST' [MSG] [Wed Jul 26 11:24:54 2006] Extracted 'Test::Tester' to '/opt/perl/testers/.cpanplus/5.8.8/build/Test-Tester-0.103' [MSG] [Wed Jul 26 11:24:54 2006] Checking if your kit is complete... Looks good Writing Makefile for Test::Tester [MSG] [Wed Jul 26 11:24:54 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Wed Jul 26 11:24:55 2006] cp lib/Test/Tester.pm blib/lib/Test/Tester.pm cp lib/Test/Tester/Capture.pm blib/lib/Test/Tester/Capture.pm cp lib/Test/Tester/CaptureRunner.pm blib/lib/Test/Tester/CaptureRunner.pm cp lib/Test/Tester/Delegate.pm blib/lib/Test/Tester/Delegate.pm Manifying blib/man3/Test::Tester::Capture.3 Manifying blib/man3/Test::Tester.3 Manifying blib/man3/Test::Tester::CaptureRunner.3 [MSG] [Wed Jul 26 11:24:56 2006] MAKE TEST passed: t/auto...........ok t/capture........ok t/check_tests....ok t/depth..........ok t/run_test.......ok All tests successful. Files=5, Tests=169, 0 wallclock secs ( 0.24 cusr + 0.13 csys = 0.37 CPU) [MSG] [Wed Jul 26 11:24:56 2006] Ok, not sending test report [MSG] [Wed Jul 26 11:24:57 2006] lib/Test/Unix/User.pm -> blib/lib/Test/Unix/User.pm Manifying blib/lib/Test/Unix/User.pm -> blib/libdoc/Test::Unix::User.3 [ERROR] [Wed Jul 26 11:24:58 2006] MAKE TEST failed: [EMAIL PROTECTED] t/00-load..........# Testing Test::Unix::User 0.02, Perl 5.008007, /local/0/usr/local/bin/perl ok t/01-user_ok....... # Failed test 'checking depth' # in t/01-user_ok.t at line 51. # got: '2' # expected: '1' # You need to change $Test::Builder::Level # Failed test 'checking depth' # in t/01-user_ok.t at line 55. # got: '2' # expected: '1' # You need to change $Test::Builder::Level # Failed test 'checking depth' # in t/01-user_ok.t at line 60. # got: '2' # expected: '1' # You need to change $Test::Builder::Level # Failed test 'checking depth' # in t/01-user_ok.t at line 65. # got: '2' # expected: '1' # You need to change $Test::Builder::Level # Failed test 'checking depth' # in t/01-user_ok.t at line 70. # got: '2' # expected: '1' # You need to change $Test::Builder::Level # Failed test 'checking depth' # in t/01-user_ok.t at line 75. # got: '2' # expected: '1' # You need to change $Test::Builder::Level # Failed test 'checking depth' # in t/01-user_ok.t at line 80. # got: '2' # expected: '1' # You need to change $Test::Builder::Level # Looks like you failed 7 tests of 103. dubious Test returned status 7 (wstat 1792, 0x700) DIED. FAILED tests 25, 32, 39, 46, 53, 60, 67 Failed 7/103 tests, 93.20% okay t/02-homedir_ok.... # Failed test 'checking depth' # in t/02-homedir_ok.t at line 96. # got: '2' # expected: '1' # You need to change $Test::Builder::Level # Looks like you failed 1 test of 102. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 52 Failed 1/102 tests, 99.02% okay t/pod-coverage.....ok t/pod..............ok Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/01-user_ok.t 7 1792 103 7 25 32 39 46 53 60 67 t/02-homedir_ok.t 1 256 102 1 52 Failed 2/5 test scripts. 8/208 subtests failed. Files=5, Tests=208, 0 wallclock secs ( 0.40 cusr + 0.19 csys = 0.59 CPU) Failed 2/5 test programs. 8/208 subtests failed. make: *** [test] Error 255 PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Test::Builder 0.33 Test::More 0.64 Test::Tester 0.103 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.16.14, archname=x86_64-linux-thread-multi-ld uname='linux rinse 2.6.16.14 #1 smp mon may 8 23:44:32 cst 2006 x86_64 gnulinux ' config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true [EMAIL PROTECTED]' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g -O3', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.4 20050314 (prerelease) (Debian 3.4.3-13)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8 alignbytes=16, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.2.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.2' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE' cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
