This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear SKUD, This is a computer-generated error report created automatically by CPANPLUS, version 0.072. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Wed Jul 26 14:03:10 2006] Trying to get 'http://www.cpan.org/authors/id/S/SK/SKUD/WWW-Automate-0.21.tar.gz' [MSG] [Wed Jul 26 14:03:11 2006] Trying to get 'http://www.cpan.org/authors/id/S/SK/SKUD/CHECKSUMS' [MSG] [Wed Jul 26 14:03:12 2006] Checksum matches for 'WWW-Automate-0.21.tar.gz' [MSG] [Wed Jul 26 14:03:13 2006] Extracted 'WWW-Automate-0.21/' [MSG] [Wed Jul 26 14:03:13 2006] Extracted 'WWW-Automate-0.21/Changes' [MSG] [Wed Jul 26 14:03:13 2006] Extracted 'WWW-Automate-0.21/lib/' [MSG] [Wed Jul 26 14:03:13 2006] Extracted 'WWW-Automate-0.21/lib/WWW/' [MSG] [Wed Jul 26 14:03:13 2006] Extracted 'WWW-Automate-0.21/lib/WWW/Automate.pm' [MSG] [Wed Jul 26 14:03:13 2006] Extracted 'WWW-Automate-0.21/Makefile.PL' [MSG] [Wed Jul 26 14:03:13 2006] Extracted 'WWW-Automate-0.21/MANIFEST' [MSG] [Wed Jul 26 14:03:13 2006] Extracted 'WWW-Automate-0.21/META.yml' [MSG] [Wed Jul 26 14:03:13 2006] Extracted 'WWW-Automate-0.21/t/' [MSG] [Wed Jul 26 14:03:13 2006] Extracted 'WWW-Automate-0.21/t/embedded-WWW-Automate.t' [MSG] [Wed Jul 26 14:03:13 2006] Extracted 'WWW::Automate' to '/opt/perl/testers/.cpanplus/5.8.8/build/WWW-Automate-0.21' [MSG] [Wed Jul 26 14:03:15 2006] Checking if your kit is complete... Looks good Writing Makefile for WWW::Automate Generating embedded tests... [MSG] [Wed Jul 26 14:03:15 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Wed Jul 26 14:03:15 2006] Module 'WWW::Automate' requires 'Clone' version '0.13' to be installed [MSG] [Wed Jul 26 14:03:16 2006] Writing Makefile for Clone [MSG] [Wed Jul 26 14:03:17 2006] Running Mkbootstrap for Clone () Manifying blib/man3/Clone.3 [MSG] [Wed Jul 26 14:03:18 2006] MAKE TEST passed: t/01array.....ok t/02hash......ok t/03scalar....ok t/04tie.......ok t/05dtype.....ok t/06refcnt....ok t/07magic.....ok 1/2 skipped: Taint::Runtime not installed t/dclone......ok All tests successful, 1 subtest skipped. Files=8, Tests=56, 1 wallclock secs ( 0.30 cusr + 0.49 csys = 0.79 CPU) [MSG] [Wed Jul 26 14:03:18 2006] Ok, not sending test report [MSG] [Wed Jul 26 14:03:21 2006] cp lib/WWW/Automate.pm blib/lib/WWW/Automate.pm Manifying blib/man3/WWW::Automate.3 [ERROR] [Wed Jul 26 14:03:24 2006] MAKE TEST failed: [EMAIL PROTECTED] t/embedded-WWW-Automate....Name "WWW::Automate::headers" used only once: possible typo at lib/WWW/Automate.pm line 309. # Failed test 'Can follow first link' # in lib/WWW/Automate.pm at line 146. # Failed test 'Can follow obvious named link' # in lib/WWW/Automate.pm at line 150. # Failed test 'Can select the first form' # in lib/WWW/Automate.pm at line 205. Can't call method "value" on an undefined value at lib//WWW/Automate.pm line 248. # Looks like you failed 3 tests of 19. # Looks like your test died just after 19. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 12, 15-16 Failed 3/19 tests, 84.21% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/embedded-WWW-Automate.t 255 65280 19 3 12 15-16 Failed 1/1 test scripts. 3/19 subtests failed. Files=1, Tests=19, 2 wallclock secs ( 0.19 cusr + 0.25 csys = 0.44 CPU) Failed 1/1 test programs. 3/19 subtests failed. make: *** [test_dynamic] Error 255 PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Clone 0.20 HTML::Form 1.054 HTML::TokeParser 2.37 HTTP::Request 1.40 LWP::UserAgent 2.033 Test::More 0.64 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.16.14, archname=x86_64-linux-thread-multi-ld uname='linux rinse 2.6.16.14 #1 smp mon may 8 23:44:32 cst 2006 x86_64 gnulinux ' config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true [EMAIL PROTECTED]' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g -O3', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.4 20050314 (prerelease) (Debian 3.4.3-13)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8 alignbytes=16, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.2.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.2' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE' cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
