This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear JGIBSON, This is a computer-generated error report created automatically by CPANPLUS, version 0.072. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Fri Jul 28 20:32:22 2006] Trying to get 'http://www.cpan.org/authors/id/J/JG/JGIBSON/Geo-SpaceManager-0.9.tar.gz' [MSG] [Fri Jul 28 20:32:24 2006] Trying to get 'http://www.cpan.org/authors/id/J/JG/JGIBSON/CHECKSUMS' [MSG] [Fri Jul 28 20:32:25 2006] Checksum matches for 'Geo-SpaceManager-0.9.tar.gz' [MSG] [Fri Jul 28 20:32:25 2006] Extracted 'Geo-SpaceManager-0.9/' [MSG] [Fri Jul 28 20:32:25 2006] Extracted 'Geo-SpaceManager-0.9/Changes' [MSG] [Fri Jul 28 20:32:26 2006] Extracted 'Geo-SpaceManager-0.9/lib/' [MSG] [Fri Jul 28 20:32:26 2006] Extracted 'Geo-SpaceManager-0.9/lib/Geo/' [MSG] [Fri Jul 28 20:32:26 2006] Extracted 'Geo-SpaceManager-0.9/lib/Geo/SpaceManager.pm' [MSG] [Fri Jul 28 20:32:26 2006] Extracted 'Geo-SpaceManager-0.9/LICENSE' [MSG] [Fri Jul 28 20:32:26 2006] Extracted 'Geo-SpaceManager-0.9/Makefile.PL' [MSG] [Fri Jul 28 20:32:26 2006] Extracted 'Geo-SpaceManager-0.9/MANIFEST' [MSG] [Fri Jul 28 20:32:26 2006] Extracted 'Geo-SpaceManager-0.9/META.yml' [MSG] [Fri Jul 28 20:32:26 2006] Extracted 'Geo-SpaceManager-0.9/README' [MSG] [Fri Jul 28 20:32:26 2006] Extracted 'Geo-SpaceManager-0.9/t/' [MSG] [Fri Jul 28 20:32:26 2006] Extracted 'Geo-SpaceManager-0.9/t/01load.t' [MSG] [Fri Jul 28 20:32:26 2006] Extracted 'Geo-SpaceManager-0.9/t/02add.t' [MSG] [Fri Jul 28 20:32:26 2006] Extracted 'Geo-SpaceManager-0.9/t/03nearest.t' [MSG] [Fri Jul 28 20:32:26 2006] Extracted 'Geo-SpaceManager-0.9/t/04normal.t' [MSG] [Fri Jul 28 20:32:27 2006] Extracted 'Geo-SpaceManager-0.9/t/05minimum.t' [MSG] [Fri Jul 28 20:32:27 2006] Extracted 'Geo-SpaceManager-0.9/t/06distance.t' [MSG] [Fri Jul 28 20:32:27 2006] Extracted 'Geo-SpaceManager-0.9/Todo' [MSG] [Fri Jul 28 20:32:27 2006] Extracted 'Geo::SpaceManager' to '/opt/perl/testers/.cpanplus/5.8.8/build/Geo-SpaceManager-0.9' [MSG] [Fri Jul 28 20:32:27 2006] Checking if your kit is complete... Looks good Warning: prerequisite Test::Number::Delta 0.16 not found. Writing Makefile for Geo::SpaceManager [MSG] [Fri Jul 28 20:32:27 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Jul 28 20:32:28 2006] Module 'Geo::SpaceManager' requires 'Test::Number::Delta' version '0.16' to be installed [MSG] [Fri Jul 28 20:32:28 2006] Trying to get 'http://www.cpan.org/authors/id/D/DA/DAGOLDEN/Test-Number-Delta-1.01.tar.gz' [MSG] [Fri Jul 28 20:32:29 2006] Trying to get 'http://www.cpan.org/authors/id/D/DA/DAGOLDEN/CHECKSUMS' [MSG] [Fri Jul 28 20:32:31 2006] Checksum matches for 'Test-Number-Delta-1.01.tar.gz' [MSG] [Fri Jul 28 20:32:31 2006] Extracted 'Test-Number-Delta-1.01/' [MSG] [Fri Jul 28 20:32:32 2006] Extracted 'Test-Number-Delta-1.01/README' [MSG] [Fri Jul 28 20:32:32 2006] Extracted 'Test-Number-Delta-1.01/MANIFEST' [MSG] [Fri Jul 28 20:32:32 2006] Extracted 'Test-Number-Delta-1.01/LICENSE' [MSG] [Fri Jul 28 20:32:32 2006] Extracted 'Test-Number-Delta-1.01/Build.PL' [MSG] [Fri Jul 28 20:32:32 2006] Extracted 'Test-Number-Delta-1.01/t/' [MSG] [Fri Jul 28 20:32:32 2006] Extracted 'Test-Number-Delta-1.01/t/07-noplan_passthrough.t' [MSG] [Fri Jul 28 20:32:32 2006] Extracted 'Test-Number-Delta-1.01/t/99-pod_coverage.t' [MSG] [Fri Jul 28 20:32:32 2006] Extracted 'Test-Number-Delta-1.01/t/98-pod.t' [MSG] [Fri Jul 28 20:32:32 2006] Extracted 'Test-Number-Delta-1.01/t/05-check_bad_param.t' [MSG] [Fri Jul 28 20:32:32 2006] Extracted 'Test-Number-Delta-1.01/t/06-plan_passthrough.t' [MSG] [Fri Jul 28 20:32:32 2006] Extracted 'Test-Number-Delta-1.01/t/08-param_and_plan_passthrough.t' [MSG] [Fri Jul 28 20:32:32 2006] Extracted 'Test-Number-Delta-1.01/t/04-specify_relative.t' [MSG] [Fri Jul 28 20:32:32 2006] Extracted 'Test-Number-Delta-1.01/t/02-delta.t' [MSG] [Fri Jul 28 20:32:33 2006] Extracted 'Test-Number-Delta-1.01/t/03-specify_epsilon.t' [MSG] [Fri Jul 28 20:32:33 2006] Extracted 'Test-Number-Delta-1.01/t/01-module-basics.t' [MSG] [Fri Jul 28 20:32:33 2006] Extracted 'Test-Number-Delta-1.01/t/09-bad_param_plan_order.t' [MSG] [Fri Jul 28 20:32:33 2006] Extracted 'Test-Number-Delta-1.01/INSTALL' [MSG] [Fri Jul 28 20:32:33 2006] Extracted 'Test-Number-Delta-1.01/Changes' [MSG] [Fri Jul 28 20:32:33 2006] Extracted 'Test-Number-Delta-1.01/Todo' [MSG] [Fri Jul 28 20:32:33 2006] Extracted 'Test-Number-Delta-1.01/META.yml' [MSG] [Fri Jul 28 20:32:33 2006] Extracted 'Test-Number-Delta-1.01/lib/' [MSG] [Fri Jul 28 20:32:33 2006] Extracted 'Test-Number-Delta-1.01/lib/Test/' [MSG] [Fri Jul 28 20:32:33 2006] Extracted 'Test-Number-Delta-1.01/lib/Test/Number/' [MSG] [Fri Jul 28 20:32:33 2006] Extracted 'Test-Number-Delta-1.01/lib/Test/Number/Delta.pm' [MSG] [Fri Jul 28 20:32:33 2006] Extracted 'Test-Number-Delta-1.01/Makefile.PL' [MSG] [Fri Jul 28 20:32:33 2006] Extracted 'Test::Number::Delta' to '/opt/perl/testers/.cpanplus/5.8.8/build/Test-Number-Delta-1.01' [MSG] [Fri Jul 28 20:32:34 2006] Checking if your kit is complete... Looks good Writing Makefile for Test::Number::Delta [MSG] [Fri Jul 28 20:32:34 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Jul 28 20:32:36 2006] cp lib/Test/Number/Delta.pm blib/lib/Test/Number/Delta.pm Manifying blib/man3/Test::Number::Delta.3 [MSG] [Fri Jul 28 20:32:37 2006] MAKE TEST passed: t/01-module-basics.................ok t/02-delta.........................ok t/03-specify_epsilon...............ok t/04-specify_relative..............ok t/05-check_bad_param...............ok t/06-plan_passthrough..............ok t/07-noplan_passthrough............ok t/08-param_and_plan_passthrough....ok t/09-bad_param_plan_order..........ok t/98-pod...........................skipped all skipped: Skipping author tests t/99-pod_coverage..................skipped all skipped: Skipping author tests All tests successful, 2 tests skipped. Files=11, Tests=28, 1 wallclock secs ( 0.38 cusr + 0.32 csys = 0.70 CPU) [MSG] [Fri Jul 28 20:32:43 2006] Successfully sent 'pass' report for 'Test-Number-Delta-1.01' [MSG] [Fri Jul 28 20:32:44 2006] cp lib/Geo/SpaceManager.pm blib/lib/Geo/SpaceManager.pm Manifying blib/man3/Geo::SpaceManager.3 [ERROR] [Fri Jul 28 20:32:46 2006] MAKE TEST failed: [EMAIL PROTECTED] t/01load........ok t/02add.........ok t/03nearest.....ok t/04normal......ok t/05minimum.....ok t/06distance.... # Failed test in t/06distance.t at line 13. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 14. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 15. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 16. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 17. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 18. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 19. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 20. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 149. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 150. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 151. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 152. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 153. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 154. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 155. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 156. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 285. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 286. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 287. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 288. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 289. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 290. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 291. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 292. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 421. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 422. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 423. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 424. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 425. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 426. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 427. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 428. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 557. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 558. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 559. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 560. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 561. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 562. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 563. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 564. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 693. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 694. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 695. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 696. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 697. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 698. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 699. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 700. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 829. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 830. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 831. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 832. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 833. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 834. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 835. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 836. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 965. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 966. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 967. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 968. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 969. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 970. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 971. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 972. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1101. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1102. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1103. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1104. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1105. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1106. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1107. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1108. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1237. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1238. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1239. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1240. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1241. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1242. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1243. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1244. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1373. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1374. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1375. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1376. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1377. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1378. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1379. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1380. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1509. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1510. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1511. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1512. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1513. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1514. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1515. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1516. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1645. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1646. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1647. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1648. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1649. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1650. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1651. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1652. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1781. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1782. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1783. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1784. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1785. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1786. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1787. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1788. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1917. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1918. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1919. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1920. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1921. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1922. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1923. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 1924. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 2053. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 2054. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 2055. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 2056. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 2057. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 2058. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 2059. # 0.00 and 0.00 are not equal to within 0.0 # Failed test in t/06distance.t at line 2060. # 0.00 and 0.00 are not equal to within 0.0 # Looks like you failed 128 tests of 2049. dubious Test returned status 128 (wstat 32768, 0x8000) DIED. FAILED tests 2-9, 138-145, 274-281, 410-417, 546-553, 682-689, 818-825, 954-961, 1090-1097, 1226-1233, 1362-1369, 1498-1505, 1634-1641, 1770-1777, 1906-1913, 2042-2049 Failed 128/2049 tests, 93.75% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/06distance.t 128 32768 2049 128 2-9 138-145 274-281 410-417 546-553 682- 689 818-825 954-961 1090-1097 1226-1233 1362-1369 1498-1505 1634-1641 1770-1777 1906-1913 2042-2049 Failed 1/6 test scripts. 128/4877 subtests failed. Files=6, Tests=4877, 1 wallclock secs ( 0.83 cusr + 0.32 csys = 1.15 CPU) Failed 1/6 test programs. 128/4877 subtests failed. make: *** [test_dynamic] Error 128 PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Test::Number::Delta 1.01 Test::Simple 0.64 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.16.14, archname=x86_64-linux-thread-multi-ld uname='linux rinse 2.6.16.14 #1 smp mon may 8 23:44:32 cst 2006 x86_64 gnulinux ' config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true [EMAIL PROTECTED]' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g -O3', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.4 20050314 (prerelease) (Debian 3.4.3-13)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8 alignbytes=16, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.2.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.2' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE' cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
