This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear David Golden, This is a computer-generated error report created automatically by CPANPLUS, version 0.072. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Thu Sep 7 09:38:18 2006] Trying to get 'http://mirrors.kernel.org/cpan/authors/id/D/DA/DAGOLDEN/CPAN-Reporter-0.15.tar.gz' [MSG] [Thu Sep 7 09:38:19 2006] Trying to get 'http://mirrors.kernel.org/cpan/authors/id/D/DA/DAGOLDEN/CHECKSUMS' [MSG] [Thu Sep 7 09:38:19 2006] Checksum matches for 'CPAN-Reporter-0.15.tar.gz' [MSG] [Thu Sep 7 09:38:20 2006] Extracted 'CPAN-Reporter-0.15/' [MSG] [Thu Sep 7 09:38:20 2006] Extracted 'CPAN-Reporter-0.15/README' [MSG] [Thu Sep 7 09:38:20 2006] Extracted 'CPAN-Reporter-0.15/MANIFEST' [MSG] [Thu Sep 7 09:38:20 2006] Extracted 'CPAN-Reporter-0.15/LICENSE' [MSG] [Thu Sep 7 09:38:20 2006] Extracted 'CPAN-Reporter-0.15/Build.PL' [MSG] [Thu Sep 7 09:38:20 2006] Extracted 'CPAN-Reporter-0.15/t/' [MSG] [Thu Sep 7 09:38:20 2006] Extracted 'CPAN-Reporter-0.15/t/03_test_report.t' [MSG] [Thu Sep 7 09:38:20 2006] Extracted 'CPAN-Reporter-0.15/t/02_config_file.t' [MSG] [Thu Sep 7 09:38:20 2006] Extracted 'CPAN-Reporter-0.15/t/dist/' [MSG] [Thu Sep 7 09:38:20 2006] Extracted 'CPAN-Reporter-0.15/t/dist/Bogus-Pass/' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/t/dist/Bogus-Pass/Build.PL' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/t/dist/Bogus-Pass/t/' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/t/dist/Bogus-Pass/t/01_Bogus_Pass.t' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/t/dist/Bogus-Pass/lib/' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/t/dist/Bogus-Pass/lib/Bogus/' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/t/dist/Bogus-Pass/lib/Bogus/Pass.pm' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/t/dist/Bogus-Pass/Makefile.PL' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/t/pod-coverage.t' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/t/pod.t' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/t/01_CPAN_Reporter.t' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/t/MockCPANDist.pm' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/INSTALL' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/Changes' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/Todo' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/META.yml' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/MANIFEST.SKIP' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/lib/' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/lib/CPAN/' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/lib/CPAN/Reporter.pod' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/lib/CPAN/Reporter.pm' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN-Reporter-0.15/Makefile.PL' [MSG] [Thu Sep 7 09:38:21 2006] Extracted 'CPAN::Reporter' to '/usr/home/theory/.cpanplus/5.8.5/build/CPAN-Reporter-0.15' [MSG] [Thu Sep 7 09:38:22 2006] Checking if your kit is complete... Looks good Warning: prerequisite IO::Capture 0.05 not found. Writing Makefile for CPAN::Reporter [MSG] [Thu Sep 7 09:38:22 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Sep 7 09:38:22 2006] Module 'CPAN::Reporter' requires 'IO::Capture' version '0.05' to be installed [MSG] [Thu Sep 7 09:38:22 2006] Trying to get 'http://mirrors.kernel.org/cpan/authors/id/R/RE/REYNOLDS/IO-Capture-0.05.tar.gz' [MSG] [Thu Sep 7 09:38:22 2006] Trying to get 'http://mirrors.kernel.org/cpan/authors/id/R/RE/REYNOLDS/CHECKSUMS' [MSG] [Thu Sep 7 09:38:22 2006] Checksum matches for 'IO-Capture-0.05.tar.gz' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/BUGS' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/Changes' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/MANIFEST' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/META.yml' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/Makefile.PL' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/README' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/lib/' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/lib/IO/' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/lib/IO/Capture/' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/lib/IO/Capture/Overview.pod' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/lib/IO/Capture/Stderr.pm' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/lib/IO/Capture/Stdout.pm' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/lib/IO/Capture/Tie_STDx.pm' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/lib/IO/Capture.pm' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/t/' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/t/01_1_Published_Methods.t' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/t/01_2_Published_Methods_Stdout.t' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/t/01_3_Published_Methods_Stderr.t' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/t/02_1_basic_base.t' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/t/02_2_basic_Stdout.t' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/t/02_3_basic_Stderr.t' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/t/03_1_Errorcheck_Stdout.t' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/t/03_2_Errorcheck_Stderr.t' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/t/04_1_Side-effects_base.t' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/t/04_2_Side-effects_Stdout.t' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/t/04_3_Side-effects_Stderr.t' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/t/05_2_regression.t' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/t/06_2_printf_Stdout.t' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/t/06_3_printf_Stderr.t' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/t/06_printf_stdout.t' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO-Capture-0.05/t/07_3_warn_Stderr.t' [MSG] [Thu Sep 7 09:38:24 2006] Extracted 'IO::Capture' to '/usr/home/theory/.cpanplus/5.8.5/build/IO-Capture-0.05' [MSG] [Thu Sep 7 09:38:24 2006] Checking if your kit is complete... Looks good Writing Makefile for IO::Capture [MSG] [Thu Sep 7 09:38:24 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Sep 7 09:38:25 2006] cp lib/IO/Capture.pm blib/lib/IO/Capture.pm cp lib/IO/Capture/Stderr.pm blib/lib/IO/Capture/Stderr.pm cp lib/IO/Capture/Stdout.pm blib/lib/IO/Capture/Stdout.pm cp lib/IO/Capture/Tie_STDx.pm blib/lib/IO/Capture/Tie_STDx.pm cp lib/IO/Capture/Overview.pod blib/lib/IO/Capture/Overview.pod Manifying blib/man3/IO::Capture.3 Manifying blib/man3/IO::Capture::Stdout.3 Manifying blib/man3/IO::Capture::Stderr.3 Manifying blib/man3/IO::Capture::Tie_STDx.3 Manifying blib/man3/IO::Capture::Overview.3 [MSG] [Thu Sep 7 09:38:27 2006] MAKE TEST passed: [MSG] [Thu Sep 7 09:38:32 2006] DEFAULT 'munge_test_report' HANDLER RETURNING 'sub return value' [MSG] [Thu Sep 7 09:38:32 2006] Successfully sent 'pass' report for 'IO-Capture-0.05' [MSG] [Thu Sep 7 09:38:33 2006] Installing /usr/local/lib/perl5/site_perl/5.8.5/IO/Capture.pm Installing /usr/local/lib/perl5/site_perl/5.8.5/IO/Capture/Stderr.pm Installing /usr/local/lib/perl5/site_perl/5.8.5/IO/Capture/Stdout.pm Installing /usr/local/lib/perl5/site_perl/5.8.5/IO/Capture/Tie_STDx.pm Installing /usr/local/lib/perl5/site_perl/5.8.5/IO/Capture/Overview.pod Installing /usr/local/man/man3/IO::Capture.3 Installing /usr/local/man/man3/IO::Capture::Stdout.3 Installing /usr/local/man/man3/IO::Capture::Stderr.3 Installing /usr/local/man/man3/IO::Capture::Tie_STDx.3 Installing /usr/local/man/man3/IO::Capture::Overview.3 Writing /usr/local/lib/perl5/site_perl/5.8.5/i386-freebsd/auto/IO/Capture/.packlist Appending installation info to /usr/local/lib/perl5/5.8.5/i386-freebsd/perllocal.pod [MSG] [Thu Sep 7 09:38:33 2006] cp lib/CPAN/Reporter.pm blib/lib/CPAN/Reporter.pm cp lib/CPAN/Reporter.pod blib/lib/CPAN/Reporter.pod Manifying blib/man3/CPAN::Reporter.3 [ERROR] [Thu Sep 7 09:38:34 2006] MAKE TEST failed: No such file or directory PERL_DL_NONLAZY=1 /usr/local/bin/perl5.8.5 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/01_CPAN_Reporter....ok t/02_config_file...... # Failed test 'config file reset to readable' # in t/02_config_file.t at line 143. # Failed test 'config file reset to writeable' # in t/02_config_file.t at line 177. # Failed test 'updated config file with a new email address and smtp server' # in t/02_config_file.t at line 194. # Failed test 'configure() ran again successfully' # in t/02_config_file.t at line 202. # Failed test 'pre-existing email address was seen during configuration prompts' # in t/02_config_file.t at line 211. # ' # Found your CPAN::Reporter config file at '/tmp/oYcp9HmeW7/.cpanreporter/config.ini'. # # Updating your CPAN::Reporter configuration settings: # # CPAN::Reporter requires a valid email address as the return address # for test reports sent to [EMAIL PROTECTED] Either provide just # an email address, or put your real name in double-quote marks followed # by your email address in angle marks, e.g. "John Doe" <[EMAIL PROTECTED]> # # email_from? [] # # If you would like, CPAN::Reporter will copy the module author with # the results of your tests. By default, authors are copied only on # failed/unknown results. This option takes a "yes/no/fail/ask" value. # # cc_author? [fail] fail # # Before test reports are sent, you may want to edit the test report # and add additional comments about the result or about your system or # Perl configuration. By default, CPAN::Reporter will ask after # each report is generated whether or not you would like to edit the # report. This option takes a "yes/no/fail/ask" value. # # edit_report? [ask/no] ask/no # # By default, CPAN::Reporter will prompt you for confirmation that # the test report should be sent before actually emailing the # report. This gives the opportunity to bypass sending particular # reports if you need to (e.g. a duplicate of an earlier result). # This option takes a "yes/no/fail/ask" value. # # send_report? [ask/yes] ask/yes # # If your computer is behind a firewall or your ISP blocks # outbound mail traffic, CPAN::Reporter will not be able to send # test reports unless you provide an alternate outbound (SMTP) # email server. Enter the full name of your outbound mail server # (e.g. smtp.your-ISP.com) or leave this blank to send mail # directly to perl.org. Use a space character to reset an existing # default. # # smtp_server? [] # # Writing CPAN::Reporter config file to '/tmp/oYcp9HmeW7/.cpanreporter/config.ini'. # ' # doesn't match '/[EMAIL PROTECTED]/' # Failed test 'pre-existing smtp server was seen during configuration prompts' # in t/02_config_file.t at line 215. # ' # Found your CPAN::Reporter config file at '/tmp/oYcp9HmeW7/.cpanreporter/config.ini'. # # Updating your CPAN::Reporter configuration settings: # # CPAN::Reporter requires a valid email address as the return address # for test reports sent to [EMAIL PROTECTED] Either provide just # an email address, or put your real name in double-quote marks followed # by your email address in angle marks, e.g. "John Doe" <[EMAIL PROTECTED]> # # email_from? [] # # If you would like, CPAN::Reporter will copy the module author with # the results of your tests. By default, authors are copied only on # failed/unknown results. This option takes a "yes/no/fail/ask" value. # # cc_author? [fail] fail # # Before test reports are sent, you may want to edit the test report # and add additional comments about the result or about your system or # Perl configuration. By default, CPAN::Reporter will ask after # each report is generated whether or not you would like to edit the # report. This option takes a "yes/no/fail/ask" value. # # edit_report? [ask/no] ask/no # # By default, CPAN::Reporter will prompt you for confirmation that # the test report should be sent before actually emailing the # report. This gives the opportunity to bypass sending particular # reports if you need to (e.g. a duplicate of an earlier result). # This option takes a "yes/no/fail/ask" value. # # send_report? [ask/yes] ask/yes # # If your computer is behind a firewall or your ISP blocks # outbound mail traffic, CPAN::Reporter will not be able to send # test reports unless you provide an alternate outbound (SMTP) # email server. Enter the full name of your outbound mail server # (e.g. smtp.your-ISP.com) or leave this blank to send mail # directly to perl.org. Use a space character to reset an existing # default. # # smtp_server? [] # # Writing CPAN::Reporter config file to '/tmp/oYcp9HmeW7/.cpanreporter/config.ini'. # ' # doesn't match '/mail.mail.com/' # Failed test 'pre-existing debug prompt was seen during configuration prompts' # in t/02_config_file.t at line 219. # ' # Found your CPAN::Reporter config file at '/tmp/oYcp9HmeW7/.cpanreporter/config.ini'. # # Updating your CPAN::Reporter configuration settings: # # CPAN::Reporter requires a valid email address as the return address # for test reports sent to [EMAIL PROTECTED] Either provide just # an email address, or put your real name in double-quote marks followed # by your email address in angle marks, e.g. "John Doe" <[EMAIL PROTECTED]> # # email_from? [] # # If you would like, CPAN::Reporter will copy the module author with # the results of your tests. By default, authors are copied only on # failed/unknown results. This option takes a "yes/no/fail/ask" value. # # cc_author? [fail] fail # # Before test reports are sent, you may want to edit the test report # and add additional comments about the result or about your system or # Perl configuration. By default, CPAN::Reporter will ask after # each report is generated whether or not you would like to edit the # report. This option takes a "yes/no/fail/ask" value. # # edit_report? [ask/no] ask/no # # By default, CPAN::Reporter will prompt you for confirmation that # the test report should be sent before actually emailing the # report. This gives the opportunity to bypass sending particular # reports if you need to (e.g. a duplicate of an earlier result). # This option takes a "yes/no/fail/ask" value. # # send_report? [ask/yes] ask/yes # # If your computer is behind a firewall or your ISP blocks # outbound mail traffic, CPAN::Reporter will not be able to send # test reports unless you provide an alternate outbound (SMTP) # email server. Enter the full name of your outbound mail server # (e.g. smtp.your-ISP.com) or leave this blank to send mail # directly to perl.org. Use a space character to reset an existing # default. # # smtp_server? [] # # Writing CPAN::Reporter config file to '/tmp/oYcp9HmeW7/.cpanreporter/config.ini'. # ' # doesn't match '/debug/' dubious Test returned status 7 (wstat 1792, 0x700) DIED. FAILED tests 19, 22-27 Failed 7/30 tests, 76.67% okay t/03_test_report......skipped all skipped: test report generation tests not yet completed t/pod-coverage........# Looks like you failed 7 tests of 30. skipped all skipped: Skipping author tests t/pod.................skipped all skipped: Skipping author tests Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------------------- t/02_config_file.t 7 1792 30 7 19 22-27 3 tests skipped. Failed 1/5 test scripts. 7/33 subtests failed. Files=5, Tests=33, 1 wallclock secs ( 0.70 cusr + 0.12 csys = 0.82 CPU) *** Error code 25 Stop in /usr/home/theory/.cpanplus/5.8.5/build/CPAN-Reporter-0.15. Failed 1/5 test programs. 7/33 subtests failed. PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Config::Tiny 2.08 ExtUtils::MakeMaker 6.30 File::Basename 2.73 File::HomeDir 0.58 File::Path 1.06 File::Spec 3.19 File::Temp 0.16 IO::Capture 0.05 Tee 0.13 Test::More 0.64 Test::Reporter 1.27 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: -- Summary of my perl5 (revision 5 version 8 subversion 5) configuration: Platform: osname=freebsd, osvers=4.8-stable, archname=i386-freebsd uname='freebsd sahlins.kineticode.com 4.8-stable freebsd 4.8-stable #0: thu may 29 15:09:07 edt 2003 [EMAIL PROTECTED]:usrsrcsyscompilepaird i386 ' config_args='-des' hint=recommended, useposix=true, d_sigaction=define usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include', optimize='-O', cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='2.95.4 20020320 [FreeBSD]', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags ='-Wl,-E -L/usr/local/lib' libpth=/usr/lib /usr/local/lib libs=-lgdbm -ldb -lm -lcrypt -lutil -lc perllibs=-lm -lcrypt -lutil -lc libc=, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
