This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear ARNE, This is a computer-generated error report created automatically by CPANPLUS, version 0.074. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sun Sep 10 15:12:08 2006] Trying to get 'http://www.cpan.org/authors/id/A/AR/ARNE/Geo-Postcodes-0.21.tar.gz' [MSG] [Sun Sep 10 15:12:10 2006] Trying to get 'http://www.cpan.org/authors/id/A/AR/ARNE/CHECKSUMS' [MSG] [Sun Sep 10 15:12:12 2006] Checksum matches for 'Geo-Postcodes-0.21.tar.gz' [MSG] [Sun Sep 10 15:12:12 2006] Extracted 'Geo-Postcodes-0.21/' [MSG] [Sun Sep 10 15:12:12 2006] Extracted 'Geo-Postcodes-0.21/t/' [MSG] [Sun Sep 10 15:12:12 2006] Extracted 'Geo-Postcodes-0.21/t/1.t' [MSG] [Sun Sep 10 15:12:12 2006] Extracted 'Geo-Postcodes-0.21/t/3_validselection.t' [MSG] [Sun Sep 10 15:12:12 2006] Extracted 'Geo-Postcodes-0.21/t/2_pod_coverage.t' [MSG] [Sun Sep 10 15:12:12 2006] Extracted 'Geo-Postcodes-0.21/t/2_pod.t' [MSG] [Sun Sep 10 15:12:12 2006] Extracted 'Geo-Postcodes-0.21/README' [MSG] [Sun Sep 10 15:12:12 2006] Extracted 'Geo-Postcodes-0.21/Postcodes/' [MSG] [Sun Sep 10 15:12:12 2006] Extracted 'Geo-Postcodes-0.21/Postcodes/Update.pm' [MSG] [Sun Sep 10 15:12:12 2006] Extracted 'Geo-Postcodes-0.21/Changes' [MSG] [Sun Sep 10 15:12:12 2006] Extracted 'Geo-Postcodes-0.21/SUBCLASS' [MSG] [Sun Sep 10 15:12:12 2006] Extracted 'Geo-Postcodes-0.21/Postcodes.pm' [MSG] [Sun Sep 10 15:12:12 2006] Extracted 'Geo-Postcodes-0.21/Makefile.PL' [MSG] [Sun Sep 10 15:12:12 2006] Extracted 'Geo-Postcodes-0.21/META.yml' [MSG] [Sun Sep 10 15:12:12 2006] Extracted 'Geo-Postcodes-0.21/MANIFEST' [MSG] [Sun Sep 10 15:12:12 2006] Extracted 'Geo::Postcodes' to 'C:\Documents and Settings\Sasha\Application Data\.cpanplus\5.8.7\build\Geo-Postcodes-0.21' [MSG] [Sun Sep 10 15:12:30 2006] Checking if your kit is complete... Looks good Writing Makefile for Geo::Postcodes [MSG] [Sun Sep 10 15:12:30 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sun Sep 10 15:16:14 2006] cp Postcodes/Update.pm blib\lib\Geo\Postcodes\Update.pm cp Postcodes.pm blib\lib\Geo\Postcodes.pm Microsoft (R) Program Maintenance Utility Version 1.50 Copyright (c) Microsoft Corp 1988-94. All rights reserved. [ERROR] [Sun Sep 10 15:17:07 2006] MAKE TEST failed: No such file or directory C:\Perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib\lib', 'blib\arch')" t/*.t t/1...................ok t/2_pod...............ok t/2_pod_coverage......dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/2 tests, 50.00% okay t/3_validselection....ok Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/2_pod_coverage.t 1 256 2 1 1 Failed 1/4 test scripts. 1/66 subtests failed. Files=4, Tests=66, 36 wallclock secs ( 0.00 cusr + 0.00 csys = 0.00 CPU) Microsoft (R) Program Maintenance Utility Version 1.50 Copyright (c) Microsoft Corp 1988-94. All rights reserved. # Failed test 'Pod coverage on Geo::Postcodes' # in C:/Perl/site/lib/Test/Pod/Coverage.pm at line 126. # Coverage for Geo::Postcodes is 96.8%, with 1 naked subroutine: # verify_selectionlist # Looks like you failed 1 test of 2. Failed 1/4 test programs. 1/66 subtests failed. NMAKE : fatal error U1077: 'C:\WINDOWS\system32\cmd.exe' : return code '0xff' Stop. ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. -- Summary of my perl5 (revision 5 version 8 subversion 7) configuration: Platform: osname=MSWin32, osvers=5.0, archname=MSWin32-x86-multi-thread uname='' config_args='undef' hint=recommended, useposix=true, d_sigaction=undef usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cl', ccflags ='-nologo -Gf -W3 -MD -Zi -DNDEBUG -O1 -DWIN32 -D_CONSOLE -DNO_STRICT -DHAVE_DES_FCRYPT -DBUILT_BY_ACTIVESTATE -DNO_HASH_SEED -DUSE_SITECUSTOMIZE -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -DPERL_MSVCRT_READFIX', optimize='-MD -Zi -DNDEBUG -O1', cppflags='-DWIN32' ccversion='12.00.8804', gccversion='', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='__int64', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='link', ldflags ='-nologo -nodefaultlib -debug -opt:ref,icf -libpath:"C:\Perl\lib\CORE" -machine:x86' libpth=\lib libs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib perllibs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl58.lib gnulibc_version='undef' Dynamic Linking: dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -debug -opt:ref,icf -libpath:"C:\Perl\lib\CORE" -machine:x86'
