This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Zev Benjamin, This is a computer-generated test report for Test-Dependencies-0.08. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. Additional comments from tester: [none provided] -- Prerequisite modules loaded: File::Find::Rule: 0.300 (Need 0) YAML: 0.620 (Need 0) IPC::Cmd: 0.250 (Need 0) Test::Builder::Tester: 1.040 (Need 0.64) Test::Builder::Module: 0.030 (Need 0) B::PerlReq: Not found (Need 0) PerlReq::Utils: Not found (Need 0) Module::CoreList: 2.080 (Need 0) -- Output from 'C:\strawberry-perl\dmake\bin\dmake.EXE test': C:\strawberry-perl\perl\bin\perl.exe "-Iinc" Makefile.PL --config= --installdeps=B::PerlReq,0,IPC::Cmd,0,Module::CoreList,0,PerlReq::Utils,0 *** Installing dependencies... CPAN: File::HomeDir loaded ok *** Installing B::PerlReq... CPAN: Storable loaded ok Going to read C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\Metadata Database was generated on Thu, 07 Sep 2006 10:32:43 GMT Running install for module B::PerlReq Running make for A/AT/ATOURBIN/rpm-build-perl-0.6.0.tar.gz CPAN: Digest::SHA loaded ok CPAN: Compress::Zlib loaded ok Checksum for C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\sources\authors\id\A\AT\ATOURBIN\rpm-build-perl-0.6.0.tar.gz ok Scanning cache C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build for sizes CPAN: Archive::Tar loaded ok rpm-build-perl-0.6.0/ rpm-build-perl-0.6.0/fake.pm rpm-build-perl-0.6.0/README.ALT rpm-build-perl-0.6.0/t/ rpm-build-perl-0.6.0/t/03-perlprov.t rpm-build-perl-0.6.0/t/01-B-PerlReq.t rpm-build-perl-0.6.0/t/02-perlreq.t rpm-build-perl-0.6.0/rpm-build-perl.spec rpm-build-perl-0.6.0/META.yml rpm-build-perl-0.6.0/perl.prov rpm-build-perl-0.6.0/perl5-alt-rpm-macros rpm-build-perl-0.6.0/Changes rpm-build-perl-0.6.0/MANIFEST rpm-build-perl-0.6.0/lib/ rpm-build-perl-0.6.0/lib/B/ rpm-build-perl-0.6.0/lib/B/PerlReq.pm rpm-build-perl-0.6.0/lib/PerlReq/ rpm-build-perl-0.6.0/lib/PerlReq/Utils.pm rpm-build-perl-0.6.0/perl.req rpm-build-perl-0.6.0/Makefile.PL rpm-build-perl-0.6.0/README Removing previously used C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\rpm-build-perl-0.6.0 CPAN.pm: Going to build A/AT/ATOURBIN/rpm-build-perl-0.6.0.tar.gz Checking if your kit is complete... Looks good Writing Makefile for rpm-build-perl CPAN: YAML loaded ok cp fake.pm blib\lib\fake.pm cp lib/B/PerlReq.pm blib\lib\B\PerlReq.pm cp lib/PerlReq/Utils.pm blib\lib\PerlReq\Utils.pm C:\strawberry-perl\perl\bin\perl.exe -MExtUtils::Command -e cp perl.prov blib\script\perl.prov pl2bat.bat blib\script\perl.prov C:\strawberry-perl\perl\bin\perl.exe -MExtUtils::Command -e cp perl.req blib\script\perl.req pl2bat.bat blib\script\perl.req C:\strawberry-perl\dmake\bin\dmake.EXE -- OK Running make test CPAN: CPAN::Reporter loaded ok C:\strawberry-perl\perl\bin\perl.exe -MExtUtils::Command -e cp perl.prov blib\script\perl.prov pl2bat.bat blib\script\perl.prov C:\strawberry-perl\perl\bin\perl.exe -MExtUtils::Command -e cp perl.req blib\script\perl.req pl2bat.bat blib\script\perl.req C:\strawberry-perl\perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib\lib', 'blib\arch')" t/*.t t/01-B-PerlReq....Your vendor has not defined Fcntl macro F_SETFD, used at t/01-B-PerlReq.t line 18. # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) t/02-perlreq......Your vendor has not defined Fcntl macro F_SETFD, used at t/02-perlreq.t line 18. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) after all the subtests completed successfully t/03-perlprov.....Your vendor has not defined Fcntl macro F_SETFD, used at t/03-perlprov.t line 17. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) after all the subtests completed successfully Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t/01-B-PerlReq.t 255 65280 ?? ?? % ?? t/02-perlreq.t 255 65280 1 0 0.00% ?? t/03-perlprov.t 255 65280 1 0 0.00% ?? Failed 3/3 test scripts, 0.00% okay. 0/2 subtests failed, 100.00% okay. dmake.EXE: Error code 255, while making 'test_dynamic' Preparing a test report for rpm-build-perl-0.6.0 Do you want to CC the the module author? (yes/no) [no] Do you want to send the test report? (yes/no) [yes] Test report discarded. C:\strawberry-perl\dmake\bin\dmake.EXE test -- NOT OK Running make install make test had returned bad status, won't install without force *** B::PerlReq installation failed. *** Installing PerlReq::Utils... Running install for module PerlReq::Utils Running make for A/AT/ATOURBIN/rpm-build-perl-0.6.0.tar.gz Is already unwrapped into directory C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\rpm-build-perl-0.6.0 Has already been processed within this session Running make test Won't repeat unsuccessful test during this command Running make install make test had returned bad status, won't install without force *** PerlReq::Utils installation failed. *** Module::AutoInstall installation finished. C:\strawberry-perl\perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib\lib', 'blib\arch')" t/00-load-basic.t t/01-load-with-exclude.t t/02-dependencies.t t/03-empty.t t/boilerplate.t t/pod-coverage.t t/pod.t t/00-load-basic........... # Failed test 'use Test::Dependencies;' # in t/00-load-basic.t at line 9. # STDOUT is: # not ok 1 - use Test::Dependencies; # # not: # ok 1 - use Test::Dependencies; # # as expected # STDERR is: # # Failed test 'use Test::Dependencies;' # # in t/00-load-basic.t at line 8. # # Tried to use 'Test::Dependencies'. # # Error: Can't locate B/PerlReq.pm in @INC (@INC contains: C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\Test-Dependencies-0.08\inc C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\Test-Dependencies-0.08\blib\lib C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\Test-Dependencies-0.08\blib\arch C:/strawberry-perl/perl/lib C:/strawberry-perl/perl/site/lib) at C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\Test-Dependencies-0.08\blib\lib/Test/Dependencies.pm line 6. # # BEGIN failed--compilation aborted at t/00-load-basic.t line 8. # # Compilation failed in require at (eval 3) line 2. # # BEGIN failed--compilation aborted at (eval 3) line 2. # # not: # # as expected FAILED test 1 Failed 1/1 tests, 0.00% okay t/01-load-with-exclude.... # Failed test 'use Test::Dependencies;' # in t/01-load-with-exclude.t at line 10. # STDOUT is: # not ok 1 - use Test::Dependencies; # # not: # ok 1 - use Test::Dependencies; # # as expected # STDERR is: # # Failed test 'use Test::Dependencies;' # # in t/01-load-with-exclude.t at line 8. # # Tried to use 'Test::Dependencies'. # # Error: Can't locate B/PerlReq.pm in @INC (@INC contains: C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\Test-Dependencies-0.08\inc C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\Test-Dependencies-0.08\blib\lib C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\Test-Dependencies-0.08\blib\arch C:/strawberry-perl/perl/lib C:/strawberry-perl/perl/site/lib) at C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\Test-Dependencies-0.08\blib\lib/Test/Dependencies.pm line 6. # # BEGIN failed--compilation aborted at t/01-load-with-exclude.t line 8. # # Compilation failed in require at (eval 3) line 2. # # BEGIN failed--compilation aborted at (eval 3) line 2. # # not: # # as expected FAILED test 1 Failed 1/1 tests, 0.00% okay t/02-dependencies.........Can't locate B/PerlReq.pm in @INC (@INC contains: C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\Test-Dependencies-0.08\inc C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\Test-Dependencies-0.08\blib\lib C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\Test-Dependencies-0.08\blib\arch C:/strawberry-perl/perl/lib C:/strawberry-perl/perl/site/lib .) at C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\Test-Dependencies-0.08\blib\lib/Test/Dependencies.pm line 6. BEGIN failed--compilation aborted at C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\Test-Dependencies-0.08\blib\lib/Test/Dependencies.pm line 6. Compilation failed in require at t/02-dependencies.t line 4. BEGIN failed--compilation aborted at t/02-dependencies.t line 4. dubious Test returned status 2 (wstat 512, 0x200) t/03-empty................Can't locate B/PerlReq.pm in @INC (@INC contains: C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\Test-Dependencies-0.08\inc C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\Test-Dependencies-0.08\blib\lib C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\Test-Dependencies-0.08\blib\arch C:/strawberry-perl/perl/lib C:/strawberry-perl/perl/site/lib .) at C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\Test-Dependencies-0.08\blib\lib/Test/Dependencies.pm line 6. BEGIN failed--compilation aborted at C:\DOCUME~1\adam\LOCALS~1\Temp\cpan\build\Test-Dependencies-0.08\blib\lib/Test/Dependencies.pm line 6. Compilation failed in require at t/03-empty.t line 4. BEGIN failed--compilation aborted at t/03-empty.t line 4. dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED tests 1-2 Failed 2/2 tests, 0.00% okay t/boilerplate.............ok t/pod-coverage............skipped all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage t/pod.....................skipped all skipped: Test::Pod 1.14 required for testing POD Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t/00-load-basic.t 1 1 100.00% 1 t/01-load-with-exclude.t 1 1 100.00% 1 t/02-dependencies.t 2 512 ?? ?? % ?? t/03-empty.t 2 512 2 4 200.00% 1-2 2 tests skipped. Failed 4/7 test scripts, 42.86% okay. 4/7 subtests failed, 42.86% okay. dmake.EXE: Error code 255, while making 'test_dynamic' -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=MSWin32, osvers=5.1, archname=MSWin32-x86-multi-thread uname='' config_args='undef' hint=recommended, useposix=true, d_sigaction=undef usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags =' -s -O2 -DWIN32 -DHAVE_DES_FCRYPT -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -fno-strict-aliasing -DPERL_MSVCRT_READFIX', optimize='-s -O2', cppflags='-DWIN32' ccversion='', gccversion='3.4.5', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='long long', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='g++', ldflags ='-s -L"c:\strawberry-perl\perl\lib\CORE" -L"c:\strawberry-perl\mingw\lib"' libpth=c:\strawberry-perl\mingw\lib libs= -lmsvcrt -lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32 perllibs= -lmsvcrt -lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32 libc=-lmsvcrt, so=dll, useshrplib=yes, libperl=libperl58.a gnulibc_version='' Dynamic Linking: dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags='-mdll -s -L"c:\strawberry-perl\perl\lib\CORE" -L"c:\strawberry-perl\mingw\lib"'
