This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear FLORA, This is a computer-generated error report created automatically by CPANPLUS, version 0.074. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Sep 11 00:17:44 2006] Trying to get 'http://www.cpan.org/authors/id/F/FL/FLORA/CHECKSUMS' [MSG] [Mon Sep 11 00:17:47 2006] Checksum matches for 'ExtUtils-Autoconf-0.01.tar.gz' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/t/' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/t/class.t' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/t/notabs.t' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/t/basic.t' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/t/pod-coverage.t' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/t/accessors.t' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/t/00-load.t' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/t/autoconf_bad_autoheader/' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/t/autoconf_bad_autoheader/configure.ac' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/t/pod.t' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/t/autoconf/' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/t/autoconf/configure.ac' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/t/kwalitee.t' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/t/autoconf_bad_configure/' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/t/autoconf_bad_configure/configure.ac' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/inc/' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/inc/Module/' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/inc/Module/Install.pm' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/inc/Module/Install/' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/inc/Module/Install/AutoInstall.pm' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/inc/Module/Install/Makefile.pm' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/inc/Module/Install/Include.pm' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/inc/Module/Install/Metadata.pm' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/inc/Module/Install/WriteAll.pm' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/inc/Module/Install/Win32.pm' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/inc/Module/Install/Fetch.pm' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/inc/Module/Install/Base.pm' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/inc/Module/Install/Can.pm' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/inc/Module/AutoInstall.pm' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/inc/Sub/' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/inc/Sub/Uplevel.pm' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/inc/Test/' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/inc/Test/Exception.pm' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/Changes' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/MANIFEST' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/examples/' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/examples/Makefile.PL' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/META.yml' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/MANIFEST.SKIP' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/lib/' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/lib/ExtUtils/' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/lib/ExtUtils/Autoconf.pm' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/Makefile.PL' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils-Autoconf-0.01/README' [MSG] [Mon Sep 11 00:17:47 2006] Extracted 'ExtUtils::Autoconf' to 'C:\Documents and Settings\Sasha\Application Data\.cpanplus\5.8.7\build\ExtUtils-Autoconf-0.01' [MSG] [Mon Sep 11 00:17:52 2006] *** Module::AutoInstall version 1.03 *** Checking for Perl dependencies... [Core Features] - Test::Exception ...loaded. (0.21) - Cwd ...loaded. (3.19) - Carp ...loaded. (1.04) - Config ...loaded. (0) - File::Spec ...loaded. (3.19) - File::Path ...loaded. (1.08) - Test::More ...loaded. (0.64) - File::Which ...loaded. (0.05) *** Module::AutoInstall configuration finished. Checking if your kit is complete... Looks good Writing Makefile for ExtUtils::Autoconf Cannot determine perl version info from lib/ExtUtils/Autoconf.pm [MSG] [Mon Sep 11 00:17:52 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [ERROR] [Mon Sep 11 00:17:52 2006] No such module 'Config' found on CPAN [MSG] [Mon Sep 11 00:18:40 2006] cp lib/ExtUtils/Autoconf.pm blib\lib\ExtUtils\Autoconf.pm Microsoft (R) Program Maintenance Utility Version 1.50 Copyright (c) Microsoft Corp 1988-94. All rights reserved. [ERROR] [Mon Sep 11 00:19:10 2006] MAKE TEST failed: No such file or directory C:\Perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib\lib', 'blib\arch')" t/00-load.t t/accessors.t t/basic.t t/class.t t/kwalitee.t t/notabs.t t/pod-coverage.t t/pod.t t/00-load.........ok t/accessors.......ok t/basic...........dubious Test returned status 14 (wstat 3584, 0xe00) DIED. FAILED tests 2-8, 11-13, 35-38 Failed 14/50 tests, 72.00% okay t/class...........dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-7, 10-12 Failed 10/21 tests, 52.38% okay t/kwalitee........skipped all skipped: Needs Test::Kwalitee t/notabs..........skipped all skipped: Needs Test::NoTabs t/pod-coverage....ok t/pod.............ok Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/basic.t 14 3584 50 14 2-8 11-13 35-38 t/class.t 10 2560 21 10 1-7 10-12 2 tests skipped. Failed 2/8 test scripts. 24/82 subtests failed. Files=8, Tests=82, 26 wallclock secs ( 0.00 cusr + 0.00 csys = 0.00 CPU) Microsoft (R) Program Maintenance Utility Version 1.50 Copyright (c) Microsoft Corp 1988-94. All rights reserved. # Testing ExtUtils::Autoconf 0.01, Perl 5.008007, C:\Perl\bin\perl.exe "-c" ¥ ï¥âáï ¢ãâ॥© ¨«¨ ¢¥è¥© ª®¬ ¤®©, ¨á¯®«ï¥¬®© ¯à®£à ¬¬®© ¨«¨ ¯ ª¥âë¬ ä ©«®¬. # Failed test 'reconf' # in t/basic.t at line 18. # died: reconf failed. check the error messages above. at C:\Documents and Settings\Sasha\Application Data\.cpanplus\5.8.7\build\ExtUtils-Autoconf-0.01\inc/Test/Exception.pm line 166 # Failed test 'config.h.in exists' # in t/basic.t at line 20. # Failed test 'configure exists' # in t/basic.t at line 21. "-c" ¥ ï¥âáï ¢ãâ॥© ¨«¨ ¢¥è¥© ª®¬ ¤®©, ¨á¯®«ï¥¬®© ¯à®£à ¬¬®© ¨«¨ ¯ ª¥âë¬ ä ©«®¬. # Failed test 'configure' # in t/basic.t at line 25. # died: reconf failed. check the error messages above. at C:\Documents and Settings\Sasha\Application Data\.cpanplus\5.8.7\build\ExtUtils-Autoconf-0.01\inc/Test/Exception.pm line 166 # Failed test 'config.h exists' # in t/basic.t at line 27. # Failed test 'opened config.h' # in t/basic.t at line 31. readline() on closed filehandle GEN0 at t/basic.t line 32. Use of uninitialized value in pattern match (m//) at t/basic.t line 32. # Failed test 'config.h has PERL_OSNAME set correctly' # in t/basic.t at line 32. # undef # doesn't match '(?-xism:#define PERL_OSNAME "MSWin32")' # Failed test 'configure still exists' # in t/basic.t at line 44. # Failed test 'config.h.in still exists' # in t/basic.t at line 45. # Failed test 'autom4te.cache still exists' # in t/basic.t at line 46. "-c" ¥ ï¥âáï ¢ãâ॥© ¨«¨ ¢¥è¥© ª®¬ ¤®©, ¨á¯®«ï¥¬®© ¯à®£à ¬¬®© ¨«¨ ¯ ª¥âë¬ ä ©«®¬. # Failed test 'configure succeeds even if reconf() didn't run before' # in t/basic.t at line 127. # died: reconf failed. check the error messages above. at C:\Documents and Settings\Sasha\Application Data\.cpanplus\5.8.7\build\ExtUtils-Autoconf-0.01\inc/Test/Exception.pm line 166 # Failed test 'config.h.in exists' # in t/basic.t at line 129. # Failed test 'configure exists' # in t/basic.t at line 130. # Failed test 'config.h exists' # in t/basic.t at line 131. "-c" ¥ ï¥âáï ¢ãâ॥© ¨«¨ ¢¥è¥© ª®¬ ¤®©, ¨á¯®«ï¥¬®© ¯à®£à ¬¬®© ¨«¨ ¯ ª¥âë¬ ä ©«®¬. "-c" ¥ ï¥âáï ¢ãâ॥© ¨«¨ ¢¥è¥© ª®¬ ¤®©, ¨á¯®«ï¥¬®© ¯à®£à ¬¬®© ¨«¨ ¯ ª¥âë¬ ä ©«®¬. "-c" ¥ ï¥âáï ¢ãâ॥© ¨«¨ ¢¥è¥© ª®¬ ¤®©, ¨á¯®«ï¥¬®© ¯à®£à ¬¬®© ¨«¨ ¯ ª¥âë¬ ä ©«®¬. # Looks like you failed 14 tests of 50. "-c" ¥ ï¥âáï ¢ãâ॥© ¨«¨ ¢¥è¥© ª®¬ ¤®©, ¨á¯®«ï¥¬®© ¯à®£à ¬¬®© ¨«¨ ¯ ª¥âë¬ ä ©«®¬. # Failed test 'run_autogen' # in t/class.t at line 16. # died: reconf failed. check the error messages above. at C:\Documents and Settings\Sasha\Application Data\.cpanplus\5.8.7\build\ExtUtils-Autoconf-0.01\inc/Test/Exception.pm line 166 # Failed test 'config.h.in exists' # in t/class.t at line 18. # Failed test 'configure exists' # in t/class.t at line 19. "-c" ¥ ï¥âáï ¢ãâ॥© ¨«¨ ¢¥è¥© ª®¬ ¤®©, ¨á¯®«ï¥¬®© ¯à®£à ¬¬®© ¨«¨ ¯ ª¥âë¬ ä ©«®¬. # Failed test 'configure' # in t/class.t at line 23. # died: reconf failed. check the error messages above. at C:\Documents and Settings\Sasha\Application Data\.cpanplus\5.8.7\build\ExtUtils-Autoconf-0.01\inc/Test/Exception.pm line 166 # Failed test 'config.h exists' # in t/class.t at line 25. # Failed test 'opened config.h' # in t/class.t at line 29. readline() on closed filehandle GEN0 at t/class.t line 30. Use of uninitialized value in pattern match (m//) at t/class.t line 30. # Failed test 'config.h has PERL_OSNAME set correctly' # in t/class.t at line 30. # undef # doesn't match '(?-xism:#define PERL_OSNAME "MSWin32")' # Failed test 'configure still exists' # in t/class.t at line 42. # Failed test 'config.h.in still exists' # in t/class.t at line 43. # Failed test 'autom4te.cache still exists' # in t/class.t at line 44. # Looks like you failed 10 tests of 21. Failed 2/8 test programs. 24/82 subtests failed. NMAKE : fatal error U1077: 'C:\WINDOWS\system32\cmd.exe' : return code '0xff' Stop. PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Carp 1.04 Cwd 3.19 File::Path 1.08 File::Spec 3.19 File::Which 0.05 Test::Exception 0.21 Test::More 0.64 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. -- Summary of my perl5 (revision 5 version 8 subversion 7) configuration: Platform: osname=MSWin32, osvers=5.0, archname=MSWin32-x86-multi-thread uname='' config_args='undef' hint=recommended, useposix=true, d_sigaction=undef usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cl', ccflags ='-nologo -Gf -W3 -MD -Zi -DNDEBUG -O1 -DWIN32 -D_CONSOLE -DNO_STRICT -DHAVE_DES_FCRYPT -DBUILT_BY_ACTIVESTATE -DNO_HASH_SEED -DUSE_SITECUSTOMIZE -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -DPERL_MSVCRT_READFIX', optimize='-MD -Zi -DNDEBUG -O1', cppflags='-DWIN32' ccversion='12.00.8804', gccversion='', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='__int64', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='link', ldflags ='-nologo -nodefaultlib -debug -opt:ref,icf -libpath:"C:\Perl\lib\CORE" -machine:x86' libpth=\lib libs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib perllibs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl58.lib gnulibc_version='undef' Dynamic Linking: dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -debug -opt:ref,icf -libpath:"C:\Perl\lib\CORE" -machine:x86'
