This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Jos Boumans, This is a computer-generated error report created automatically by CPANPLUS, version 0.061. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sat Sep 16 08:14:34 2006] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/K/KA/KANE/IPC-Cmd-0.25.tar.gz' [MSG] [Sat Sep 16 08:14:36 2006] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/K/KA/KANE/CHECKSUMS' [MSG] [Sat Sep 16 08:14:38 2006] Checksum matches for 'IPC-Cmd-0.25.tar.gz' [MSG] [Sat Sep 16 08:14:38 2006] Extracted 'IPC-Cmd-0.25/' [MSG] [Sat Sep 16 08:14:38 2006] Extracted 'IPC-Cmd-0.25/CHANGES' [MSG] [Sat Sep 16 08:14:38 2006] Extracted 'IPC-Cmd-0.25/lib/' [MSG] [Sat Sep 16 08:14:38 2006] Extracted 'IPC-Cmd-0.25/lib/IPC/' [MSG] [Sat Sep 16 08:14:38 2006] Extracted 'IPC-Cmd-0.25/lib/IPC/Cmd.pm' [MSG] [Sat Sep 16 08:14:38 2006] Extracted 'IPC-Cmd-0.25/Makefile.PL' [MSG] [Sat Sep 16 08:14:38 2006] Extracted 'IPC-Cmd-0.25/MANIFEST' [MSG] [Sat Sep 16 08:14:38 2006] Extracted 'IPC-Cmd-0.25/META.yml' [MSG] [Sat Sep 16 08:14:38 2006] Extracted 'IPC-Cmd-0.25/README' [MSG] [Sat Sep 16 08:14:38 2006] Extracted 'IPC-Cmd-0.25/t/' [MSG] [Sat Sep 16 08:14:38 2006] Extracted 'IPC-Cmd-0.25/t/01_IPC-Cmd.t' [MSG] [Sat Sep 16 08:14:38 2006] Extracted 'IPC-Cmd-0.25/t/02_Interactive.t' [MSG] [Sat Sep 16 08:14:38 2006] Extracted 'IPC-Cmd-0.25/t/src/' [MSG] [Sat Sep 16 08:14:38 2006] Extracted 'IPC-Cmd-0.25/t/src/child.pl' [MSG] [Sat Sep 16 08:14:38 2006] Extracted 'IPC::Cmd' to 'C:\Perl\Cpanplus\5.8.8\build\IPC-Cmd-0.25' [MSG] [Sat Sep 16 08:14:39 2006] Checking if your kit is complete... Looks good Writing Makefile for IPC::Cmd Set up gcc environment - 3.4.5 (mingw special) [MSG] [Sat Sep 16 08:14:39 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sat Sep 16 08:14:42 2006] cp lib/IPC/Cmd.pm blib\lib\IPC\Cmd.pm [ERROR] [Sat Sep 16 08:14:43 2006] MAKE TEST failed: No such file or directory C:\Perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib\lib', 'blib\arch')" t/*.t t/01_IPC-Cmd........dubious Test returned status 255 (wstat 65280, 0xff00) after all the subtests completed successfully t/02_Interactive....skipped all skipped: No interactive tests from harness Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t/01_IPC-Cmd.t 255 65280 3 0 0.00% ?? 1 test skipped. Set up gcc environment - 3.4.5 (mingw special) An operation was attempted on something that is not a socket at ../lib/IPC/Cmd.pm line 177 # Looks like your test died just after 3. Failed 1/2 test scripts, 50.00% okay. 0/3 subtests failed, 100.00% okay. dmake.EXE: Error code 255, while making 'test_dynamic' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Locale::Maketext::Simple 0.16 Module::Load::Conditional 0.08 Params::Check 0.25 Test::More 0.62 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=MSWin32, osvers=5.0, archname=MSWin32-x86-multi-thread uname='' config_args='undef' hint=recommended, useposix=true, d_sigaction=undef usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-DNDEBUG -DWIN32 -D_CONSOLE -DNO_STRICT -DHAVE_DES_FCRYPT -DNO_HASH_SEED -DUSE_SITECUSTOMIZE -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -DPERL_MSVCRT_READFIX -DHASATTRIBUTE -fno-strict-aliasing', optimize='-O2', cppflags='-DWIN32' ccversion='12.00.8804', gccversion='3.4.5 (mingw special)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='__int64', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='gcc', ldflags ='-nologo -nodefaultlib -debug -opt:ref,icf -libpath:"C:\Perl\lib\CORE" -machine:x86' libpth=\lib libs=-lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32 -lmsvcrt perllibs=-lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32 -lmsvcrt libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl58.lib gnulibc_version='' Dynamic Linking: dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags='-mdll'
