This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Thomas Klausner, This is a computer-generated error report created automatically by CPANPLUS, version 0.061. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Sep 18 11:03:50 2006] Writing Makefile for Module::CPANTS::Analyse [MSG] [Mon Sep 18 11:03:50 2006] cp bin/cpants_lint.pl blib/script/cpants_lint.pl /usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/cpants_lint.pl Manifying blib/man1/cpants_lint.pl.1 Manifying blib/man3/Module::CPANTS::Kwalitee.3pm Manifying blib/man3/Module::CPANTS::Kwalitee::Files.3pm Manifying blib/man3/Module::CPANTS::Kwalitee::Pod.3pm Manifying blib/man3/Module::CPANTS::Kwalitee::Manifest.3pm Manifying blib/man3/Module::CPANTS::Analyse.3pm Manifying blib/man3/Module::CPANTS::Kwalitee::Uses.3pm Manifying blib/man3/Module::CPANTS::Kwalitee::Prereq.3pm Manifying blib/man3/Module::CPANTS::Kwalitee::CpantsErrors.3pm Manifying blib/man3/Module::CPANTS::Kwalitee::BrokenInstaller.3pm Manifying blib/man3/Module::CPANTS::Kwalitee::FindModules.3pm Manifying blib/man3/Module::CPANTS::Kwalitee::Distname.3pm [ERROR] [Mon Sep 18 11:03:58 2006] MAKE TEST failed: PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_load..................ok t/99_pod...................ok t/99_pod_coverage..........ok t/analyse..................ok t/analyse_afs.............. # Failed test 'has perl license' # in t/analyse_afs.t at line 23. # got: undef # expected: 'perl' # Looks like you failed 1 test of 8. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 8 Failed 1/8 tests, 87.50% okay t/calc.....................ok t/kwalitee................. # Failed test 'available kwalitee' # in t/kwalitee.t at line 8. # got: '20' # expected: '21' # Failed test 'total kwalitee' # in t/kwalitee.t at line 9. # got: '22' # expected: '23' # Failed test 'number of indicators' # in t/kwalitee.t at line 18. # got: '22' # expected: '23' # Failed test 'number of indicators' # in t/kwalitee.t at line 20. # got: '22' # expected: '23' # Failed test 'number of indicators' # in t/kwalitee.t at line 25. # got: '20' # expected: '21' # Failed test 'number of indicators' # in t/kwalitee.t at line 27. # got: '20' # expected: '21' # Looks like you failed 6 tests of 10. dubious Test returned status 6 (wstat 1536, 0x600) DIED. FAILED tests 1-2, 5-8 Failed 6/10 tests, 40.00% okay t/plugins.................. # Failed test 'number of plugins' # in t/plugins.t at line 10. # got: '9' # expected: '10' # Failed test 'plugin order the rest' # in t/plugins.t at line 21. # Comparing $data as a Bag # Missing: 'Module::CPANTS::Kwalitee::MetaYML' # Looks like you failed 2 tests of 6. dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED tests 1, 6 Failed 2/6 tests, 66.67% okay t/testdir..................ok t/testfile.................ok t/unpack...................ok t/unpack_notextractable....ok Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t/analyse_afs.t 1 256 8 1 12.50% 8 t/kwalitee.t 6 1536 10 6 60.00% 1-2 5-8 t/plugins.t 2 512 6 2 33.33% 1 6 Failed 3/12 test scripts, 75.00% okay. 9/85 subtests failed, 89.41% okay. make: *** [test_dynamic] Error 255 PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Archive::Any 0.06 Archive::Tar 1.30 CPAN::DistnameInfo 0.06 Class::Accessor 0.25 IO::Capture 0.05 Module::ExtractUse 0.18 Module::Pluggable 3.01 Pod::Simple::Checker 2.02 YAML 0.62 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: Thanks for your effort! (Hope you can fix this soon :) -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.9-34.elsmp, archname=i386-linux-thread-multi uname='linux hs20-bc2-4.build.redhat.com 2.6.9-34.elsmp #1 smp fri feb 24 16:56:28 est 2006 i686 i686 i386 gnulinux ' config_args='-des -Doptimize=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables -Dversion=5.8.8 -Dmyhostname=localhost [EMAIL PROTECTED] -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Darchname=i386-linux -Dvendorprefix=/usr -Dsiteprefix=/usr -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl=n -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dd_gethostent_r_proto -Ud_endhostent_r_proto -Ud_sethostent_r_proto -Ud_endprotoent_r_proto -Ud_setprotoent_r_proto -Ud_endservent_r_proto -Ud_setservent_r_proto -Dinc_version_list=5.8.7 5.8.6 5.8.5 5.8.4 5.8.3 -Dscriptdir=/usr/bin' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm', optimize='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables', cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -I/usr/include/gdbm' ccversion='', gccversion='4.1.1 20060525 (Red Hat 4.1.1-1)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.4.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.4' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE' cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
