This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear KITTY, This is a computer-generated error report created automatically by CPANPLUS, version 0.074. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Oct 2 05:01:07 2006] Trying to get 'http://www.cpan.org/authors/id/K/KI/KITTY/LJ-Schedule-0.6.tar.gz' [MSG] [Mon Oct 2 05:01:09 2006] Trying to get 'http://www.cpan.org/authors/id/K/KI/KITTY/CHECKSUMS' [MSG] [Mon Oct 2 05:01:10 2006] Checksum matches for 'LJ-Schedule-0.6.tar.gz' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/Changes' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/lib/' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/lib/LJ/' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/lib/LJ/Schedule/' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/lib/LJ/Schedule/Post/' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/lib/LJ/Schedule/Post/Simple.pm' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/lib/LJ/Schedule/Post.pm' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/lib/LJ/Schedule/Vcal.pm' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/lib/LJ/Schedule.pm' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/Makefile.PL' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/MANIFEST' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/META.yml' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/README' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/t/' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/t/00-load.t' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/t/01schedule.t' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/t/02vcal.t' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/t/boilerplate.t' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/t/pod-coverage.t' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/t/pod.t' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/t/test1.ini' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/t/test2.vcal' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/t/test2.vcal.dst' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ-Schedule-0.6/t/test2.vcal.ics' [MSG] [Mon Oct 2 05:01:10 2006] Extracted 'LJ::Schedule' to '/opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6' [MSG] [Mon Oct 2 05:01:10 2006] Checking if your kit is complete... Looks good Writing Makefile for LJ::Schedule [MSG] [Mon Oct 2 05:01:10 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Oct 2 05:01:11 2006] cp lib/LJ/Schedule.pm blib/lib/LJ/Schedule.pm cp lib/LJ/Schedule/Post.pm blib/lib/LJ/Schedule/Post.pm cp lib/LJ/Schedule/Vcal.pm blib/lib/LJ/Schedule/Vcal.pm cp lib/LJ/Schedule/Post/Simple.pm blib/lib/LJ/Schedule/Post/Simple.pm Manifying blib/man3/LJ::Schedule.3 Manifying blib/man3/LJ::Schedule::Post.3 Manifying blib/man3/LJ::Schedule::Post::Simple.3 Manifying blib/man3/LJ::Schedule::Vcal.3 [ERROR] [Mon Oct 2 05:01:11 2006] MAKE TEST failed: [EMAIL PROTECTED] t/00-load......... # Failed test 'use LJ::Schedule;' # in t/00-load.t at line 6. # Tried to use 'LJ::Schedule'. # Error: Can't locate Date/Parse.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/Sub-Uplevel-0.13/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Sub-Uplevel-0.13/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Sub-Uplevel-0.13/blib /opt/perl/testers/.cpanplus/5.8.8/build/Test-Exception-0.22/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Test-Exception-0.22/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Test-Exception-0.22/blib /opt/perl/testers/.cpanplus/5.8.8/build/Best-0.09/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Best-0.09/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Best-0.09/blib /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/! 5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl . /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl) at /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule/Vcal.pm line 6. # BEGIN failed--compilation aborted at t/00-load.t line 6. # Compilation failed in require at /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule.pm line 118. # BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule.pm line 118. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. # Failed test 'use LJ::Schedule::Post;' # in t/00-load.t at line 8. # Tried to use 'LJ::Schedule::Post'. # Error: Can't locate LJ/Simple.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/Sub-Uplevel-0.13/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Sub-Uplevel-0.13/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Sub-Uplevel-0.13/blib /opt/perl/testers/.cpanplus/5.8.8/build/Test-Exception-0.22/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Test-Exception-0.22/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Test-Exception-0.22/blib /opt/perl/testers/.cpanplus/5.8.8/build/Best-0.09/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Best-0.09/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Best-0.09/blib /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5! .8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl . /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl) at /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule/Post/Simple.pm line 8. # BEGIN failed--compilation aborted at t/00-load.t line 8. # Compilation failed in require at /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule/Post.pm line 78. # BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule/Post.pm line 78. # Compilation failed in require at (eval 5) line 2. # BEGIN failed--compilation aborted at (eval 5) line 2. Use of uninitialized value in concatenation (.) or string at t/00-load.t line 12. # Testing LJ::Schedule , Perl 5.008008, /opt/perl/testers/bin/perl # Looks like you failed 2 tests of 4. dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED tests 1, 3 Failed 2/4 tests, 50.00% okay t/01schedule...... # Failed test 'use LJ::Schedule;' # in t/01schedule.t at line 6. # Tried to use 'LJ::Schedule'. # Error: Can't locate Date/Parse.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/Sub-Uplevel-0.13/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Sub-Uplevel-0.13/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Sub-Uplevel-0.13/blib /opt/perl/testers/.cpanplus/5.8.8/build/Test-Exception-0.22/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Test-Exception-0.22/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Test-Exception-0.22/blib /opt/perl/testers/.cpanplus/5.8.8/build/Best-0.09/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Best-0.09/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Best-0.09/blib /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/! 5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl . /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl) at /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule/Vcal.pm line 6. # BEGIN failed--compilation aborted at t/01schedule.t line 6. # Compilation failed in require at /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule.pm line 118. # BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule.pm line 118. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Undefined subroutine &LJ::Schedule::get_config called at t/01schedule.t line 9. # Looks like you planned 7 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-7 Failed 7/7 tests, 0.00% okay t/02vcal.......... # Failed test 'use LJ::Schedule::Vcal;' # in t/02vcal.t at line 8. # Tried to use 'LJ::Schedule::Vcal'. # Error: Can't locate Date/Parse.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/Sub-Uplevel-0.13/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Sub-Uplevel-0.13/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Sub-Uplevel-0.13/blib /opt/perl/testers/.cpanplus/5.8.8/build/Test-Exception-0.22/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Test-Exception-0.22/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Test-Exception-0.22/blib /opt/perl/testers/.cpanplus/5.8.8/build/Best-0.09/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Best-0.09/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Best-0.09/blib /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/! 5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl . /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl) at /opt/perl/testers/.cpanplus/5.8.8/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule/Vcal.pm line 6. # BEGIN failed--compilation aborted at t/02vcal.t line 8. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Can't locate object method "new" via package "LJ::Schedule::Vcal" at t/02vcal.t line 15. # Looks like you planned 2 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-2 Failed 2/2 tests, 0.00% okay t/boilerplate.....ok t/pod-coverage....ok t/pod.............ok Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/00-load.t 2 512 4 2 1 3 t/01schedule.t 255 65280 7 13 1-7 t/02vcal.t 255 65280 2 3 1-2 Failed 3/6 test scripts. 11/27 subtests failed. Files=6, Tests=27, 0 wallclock secs ( 0.33 cusr + 0.02 csys = 0.35 CPU) Failed 3/6 test programs. 11/27 subtests failed. make: *** [test_dynamic] Error 255 MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Date::Parse LJ::Simple As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'KITTY ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Date::Parse' => '0', # or a minimum working version 'LJ::Simple' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Test::More 0.64 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.16.14, archname=x86_64-linux-thread-multi-ld uname='linux rinse 2.6.16.14 #1 smp mon may 8 23:44:32 cst 2006 x86_64 gnulinux ' config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true [EMAIL PROTECTED]' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g -O3', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.4 20050314 (prerelease) (Debian 3.4.3-13)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8 alignbytes=16, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.2.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.2' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE' cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
