This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.
        
--

Dear KITTY,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.074. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Wed Oct  4 13:13:04 2006] Trying to get 
'http://www.cpan.org/authors/id/K/KI/KITTY/LJ-Schedule-0.6.tar.gz'
[MSG] [Wed Oct  4 13:13:05 2006] Trying to get 
'http://www.cpan.org/authors/id/K/KI/KITTY/CHECKSUMS'
[MSG] [Wed Oct  4 13:13:06 2006] Checksum matches for 'LJ-Schedule-0.6.tar.gz'
[MSG] [Wed Oct  4 13:13:06 2006] Extracted 'LJ-Schedule-0.6/'
[MSG] [Wed Oct  4 13:13:06 2006] Extracted 'LJ-Schedule-0.6/Changes'
[MSG] [Wed Oct  4 13:13:06 2006] Extracted 'LJ-Schedule-0.6/lib/'
[MSG] [Wed Oct  4 13:13:06 2006] Extracted 'LJ-Schedule-0.6/lib/LJ/'
[MSG] [Wed Oct  4 13:13:06 2006] Extracted 'LJ-Schedule-0.6/lib/LJ/Schedule/'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 
'LJ-Schedule-0.6/lib/LJ/Schedule/Post/'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 
'LJ-Schedule-0.6/lib/LJ/Schedule/Post/Simple.pm'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 
'LJ-Schedule-0.6/lib/LJ/Schedule/Post.pm'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 
'LJ-Schedule-0.6/lib/LJ/Schedule/Vcal.pm'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 'LJ-Schedule-0.6/lib/LJ/Schedule.pm'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 'LJ-Schedule-0.6/Makefile.PL'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 'LJ-Schedule-0.6/MANIFEST'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 'LJ-Schedule-0.6/META.yml'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 'LJ-Schedule-0.6/README'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 'LJ-Schedule-0.6/t/'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 'LJ-Schedule-0.6/t/00-load.t'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 'LJ-Schedule-0.6/t/01schedule.t'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 'LJ-Schedule-0.6/t/02vcal.t'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 'LJ-Schedule-0.6/t/boilerplate.t'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 'LJ-Schedule-0.6/t/pod-coverage.t'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 'LJ-Schedule-0.6/t/pod.t'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 'LJ-Schedule-0.6/t/test1.ini'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 'LJ-Schedule-0.6/t/test2.vcal'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 'LJ-Schedule-0.6/t/test2.vcal.dst'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 'LJ-Schedule-0.6/t/test2.vcal.ics'
[MSG] [Wed Oct  4 13:13:07 2006] Extracted 'LJ::Schedule' to 
'/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6'
[MSG] [Wed Oct  4 13:13:08 2006] Checking if your kit is complete...
Looks good
Writing Makefile for LJ::Schedule

[MSG] [Wed Oct  4 13:13:08 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Wed Oct  4 13:13:11 2006] cp lib/LJ/Schedule.pm blib/lib/LJ/Schedule.pm
cp lib/LJ/Schedule/Post.pm blib/lib/LJ/Schedule/Post.pm
cp lib/LJ/Schedule/Vcal.pm blib/lib/LJ/Schedule/Vcal.pm
cp lib/LJ/Schedule/Post/Simple.pm blib/lib/LJ/Schedule/Post/Simple.pm
Manifying blib/man3/LJ::Schedule.3
Manifying blib/man3/LJ::Schedule::Post.3
Manifying blib/man3/LJ::Schedule::Post::Simple.3
Manifying blib/man3/LJ::Schedule::Vcal.3

[ERROR] [Wed Oct  4 13:13:14 2006] MAKE TEST failed:  PERL_DL_NONLAZY=1 
/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 
'blib/arch')" t/*.t
t/00-load.........
#   Failed test 'use LJ::Schedule;'
#   in t/00-load.t at line 6.
#     Tried to use 'LJ::Schedule'.
#     Error:  Can't locate Data/Ical.pm in @INC (@INC contains: 
/usr/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/lib 
/usr/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/arch 
/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/lib 
/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/arch 
/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib 
/usr/local/lib/perl5/site_perl/5.8.7/mach /usr/local/lib/perl5/site_perl/5.8.7 
/usr/local/lib/perl5/site_perl/5.8.7 /usr/local/lib/perl5/site_perl 
/usr/local/lib/perl5/5.8.7/BSDPAN /usr/local/lib/perl5/5.8.7/mach 
/usr/local/lib/perl5/5.8.7 . /usr/local/lib/perl5/site_perl/5.8.7/mach 
/usr/local/lib/perl5/site_perl/5.8.7 /usr/local/lib/perl5/site_perl 
/usr/local/lib/perl5/5.8.7/BSDPAN /usr/local/lib/perl5/5.8.7/mach 
/usr/local/lib/perl5/5.8.7) at 
/usr/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule/Vcal.pm
 line 8.
# BEGIN failed--compilation aborted at t/00-load.t line 6.
# Compilation failed in require at 
/usr/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule.pm 
line 118.
# BEGIN failed--compilation aborted at 
/usr/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule.pm 
line 118.
# Compilation failed in require at (eval 5) line 2.
# BEGIN failed--compilation aborted at (eval 5) line 2.

#   Failed test 'use LJ::Schedule::Post;'
#   in t/00-load.t at line 8.
#     Tried to use 'LJ::Schedule::Post'.
#     Error:  Can't locate LJ/Simple.pm in @INC (@INC contains: 
/usr/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/lib 
/usr/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/arch 
/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/lib 
/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/arch 
/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib 
/usr/local/lib/perl5/site_perl/5.8.7/mach /usr/local/lib/perl5/site_perl/5.8.7 
/usr/local/lib/perl5/site_perl/5.8.7 /usr/local/lib/perl5/site_perl 
/usr/local/lib/perl5/5.8.7/BSDPAN /usr/local/lib/perl5/5.8.7/mach 
/usr/local/lib/perl5/5.8.7 . /usr/local/lib/perl5/site_perl/5.8.7/mach 
/usr/local/lib/perl5/site_perl/5.8.7 /usr/local/lib/perl5/site_perl 
/usr/local/lib/perl5/5.8.7/BSDPAN /usr/local/lib/perl5/5.8.7/mach 
/usr/local/lib/perl5/5.8.7) at 
/usr/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule/Post/Simple.pm
 line 8.
# BEGIN failed--compilation aborted at t/00-load.t line 8.
# Compilation failed in require at 
/usr/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule/Post.pm
 line 78.
# BEGIN failed--compilation aborted at 
/usr/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule/Post.pm
 line 78.
# Compilation failed in require at (eval 8) line 2.
# BEGIN failed--compilation aborted at (eval 8) line 2.
Use of uninitialized value in concatenation (.) or string at t/00-load.t line 
12.
# Testing LJ::Schedule , Perl 5.008007, /usr/bin/perl
# Looks like you failed 2 tests of 4.
dubious
        Test returned status 2 (wstat 512, 0x200)
DIED. FAILED tests 1, 3
        Failed 2/4 tests, 50.00% okay
t/01schedule......
#   Failed test 'use LJ::Schedule;'
#   in t/01schedule.t at line 6.
#     Tried to use 'LJ::Schedule'.
#     Error:  Can't locate Data/Ical.pm in @INC (@INC contains: 
/usr/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/lib 
/usr/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/arch 
/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/lib 
/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/arch 
/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib 
/usr/local/lib/perl5/site_perl/5.8.7/mach /usr/local/lib/perl5/site_perl/5.8.7 
/usr/local/lib/perl5/site_perl/5.8.7 /usr/local/lib/perl5/site_perl 
/usr/local/lib/perl5/5.8.7/BSDPAN /usr/local/lib/perl5/5.8.7/mach 
/usr/local/lib/perl5/5.8.7 . /usr/local/lib/perl5/site_perl/5.8.7/mach 
/usr/local/lib/perl5/site_perl/5.8.7 /usr/local/lib/perl5/site_perl 
/usr/local/lib/perl5/5.8.7/BSDPAN /usr/local/lib/perl5/5.8.7/mach 
/usr/local/lib/perl5/5.8.7) at 
/usr/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule/Vcal.pm
 line 8.
# BEGIN failed--compilation aborted at t/01schedule.t line 6.
# Compilation failed in require at 
/usr/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule.pm 
line 118.
# BEGIN failed--compilation aborted at 
/usr/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule.pm 
line 118.
# Compilation failed in require at (eval 5) line 2.
# BEGIN failed--compilation aborted at (eval 5) line 2.
Undefined subroutine &LJ::Schedule::get_config called at t/01schedule.t line 9.
# Looks like you planned 7 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
dubious
        Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-7
        Failed 7/7 tests, 0.00% okay
t/02vcal..........
#   Failed test 'use LJ::Schedule::Vcal;'
#   in t/02vcal.t at line 8.
#     Tried to use 'LJ::Schedule::Vcal'.
#     Error:  Can't locate Data/Ical.pm in @INC (@INC contains: 
/usr/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/lib 
/usr/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/arch 
/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/lib 
/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/arch 
/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib 
/usr/local/lib/perl5/site_perl/5.8.7/mach /usr/local/lib/perl5/site_perl/5.8.7 
/usr/local/lib/perl5/site_perl/5.8.7 /usr/local/lib/perl5/site_perl 
/usr/local/lib/perl5/5.8.7/BSDPAN /usr/local/lib/perl5/5.8.7/mach 
/usr/local/lib/perl5/5.8.7 . /usr/local/lib/perl5/site_perl/5.8.7/mach 
/usr/local/lib/perl5/site_perl/5.8.7 /usr/local/lib/perl5/site_perl 
/usr/local/lib/perl5/5.8.7/BSDPAN /usr/local/lib/perl5/5.8.7/mach 
/usr/local/lib/perl5/5.8.7) at 
/usr/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6/blib/lib/LJ/Schedule/Vcal.pm
 line 8.
# BEGIN failed--compilation aborted at t/02vcal.t line 8.
# Compilation failed in require at (eval 5) line 2.
# BEGIN failed--compilation aborted at (eval 5) line 2.
Can't locate object method "new" via package "LJ::Schedule::Vcal" at t/02vcal.t 
line 15.
# Looks like you planned 2 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
dubious
        Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-2
        Failed 2/2 tests, 0.00% okay
t/boilerplate.....ok
t/pod-coverage....ok
t/pod.............ok
Failed Test    Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/00-load.t       2   512     4    2  1 3
t/01schedule.t  255 65280     7   13  1-7
t/02vcal.t      255 65280     2    3  1-2
Failed 3/6 test scripts. 11/27 subtests failed.
Files=6, Tests=27,  2 wallclock secs ( 1.72 cusr +  0.52 csys =  2.23 CPU)
Failed 3/6 test programs. 11/27 subtests failed.
*** Error code 35

Stop in /usr/home/chris/.cpanplus/5.8.7/build/LJ-Schedule-0.6.



MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

Data::Ical
LJ::Simple

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'KITTY ([EMAIL PROTECTED])',
    ... # other information
    PREREQ_PM   => {
        'Data::Ical'    => '0', # or a minimum working version
        'LJ::Simple'    => '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
        Test::More                         0.64

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

--

Summary of my perl5 (revision 5 version 8 subversion 7) configuration:
  Platform:
    osname=freebsd, osvers=6.0-release, archname=alpha-freebsd
    uname='freebsd alpha.bingosnet.co.uk 6.0-release freebsd 6.0-release #0: 
thu nov 3 01:10:43 utc 2005 [EMAIL PROTECTED]:usrobjusrsrcsysgeneric alpha '
    config_args='-sde -Dprefix=/usr/local 
-Darchlib=/usr/local/lib/perl5/5.8.7/mach -Dprivlib=/usr/local/lib/perl5/5.8.7 
-Dman3dir=/usr/local/lib/perl5/5.8.7/perl/man/man3 
-Dman1dir=/usr/local/man/man1 
-Dsitearch=/usr/local/lib/perl5/site_perl/5.8.7/mach 
-Dsitelib=/usr/local/lib/perl5/site_perl/5.8.7 -Dscriptdir=/usr/local/bin 
-Dsiteman3dir=/usr/local/lib/perl5/5.8.7/man/man3 
-Dsiteman1dir=/usr/local/man/man1 -Ui_malloc -Ui_iconv -Uinstallusrbinperl 
-Dcc=cc -Duseshrplib 
-Dccflags=-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.7/BSDPAN" -Doptimize=-O2 
-fno-strict-aliasing -pipe -mcpu=ev4 -mtune=ev5 -mieee -Ud_dosuid -Ui_gdbm 
-Dusethreads=n -Dusemymalloc=y -Duse64bitint'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=undef use5005threads=undef useithreads=undef 
usemultiplicity=undef
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=undef
    usemymalloc=y, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.7/BSDPAN" 
-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe',
    optimize='-O2 -fno-strict-aliasing -pipe -mcpu=ev4 -mtune=ev5 -mieee',
    cppflags='-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.7/BSDPAN" -DHAS_FPSETMASK 
-DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe'
    ccversion='', gccversion='3.4.4 [FreeBSD] 20050518', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8
    ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', 
lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='cc', ldflags ='-pthread -Wl,-E'
    libpth=/usr/lib
    libs=-lm -lcrypt -lutil
    perllibs=-lm -lcrypt -lutil
    libc=, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='  
-Wl,-R/usr/local/lib/perl5/5.8.7/mach/CORE'
    cccdlflags='-DPIC -fPIC', lddlflags='-shared '

Reply via email to