This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear KWITTMER, This is a computer-generated error report created automatically by CPANPLUS, version 0.074. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Wed Oct 4 14:37:24 2006] Trying to get 'http://www.cpan.org/authors/id/K/KW/KWITTMER/THD7-1.1.tar.gz' [MSG] [Wed Oct 4 14:37:26 2006] Trying to get 'http://www.cpan.org/authors/id/K/KW/KWITTMER/CHECKSUMS' [MSG] [Wed Oct 4 14:37:26 2006] Checksum matches for 'THD7-1.1.tar.gz' [MSG] [Wed Oct 4 14:37:26 2006] Extracted 'THD7-1.1/' [MSG] [Wed Oct 4 14:37:26 2006] Extracted 'THD7-1.1/Makefile.PL' [MSG] [Wed Oct 4 14:37:26 2006] Extracted 'THD7-1.1/MANIFEST' [MSG] [Wed Oct 4 14:37:26 2006] Extracted 'THD7-1.1/META.yml' [MSG] [Wed Oct 4 14:37:26 2006] Extracted 'THD7-1.1/README' [MSG] [Wed Oct 4 14:37:26 2006] Extracted 'THD7-1.1/t/' [MSG] [Wed Oct 4 14:37:26 2006] Extracted 'THD7-1.1/t/test.t' [MSG] [Wed Oct 4 14:37:26 2006] Extracted 'THD7-1.1/THD7.pm' [MSG] [Wed Oct 4 14:37:26 2006] Extracted 'THD7' to '/home/hybrid/.cpanplus/5.8.4/build/THD7-1.1' [MSG] [Wed Oct 4 14:37:28 2006] Checking if your kit is complete... Looks good Writing Makefile for THD7 [MSG] [Wed Oct 4 14:37:28 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Wed Oct 4 14:37:31 2006] cp THD7.pm blib/lib/THD7.pm Manifying blib/man3/THD7.3 [ERROR] [Wed Oct 4 14:37:32 2006] MAKE TEST failed: No such file or directory PERL_DL_NONLAZY=1 /usr/bin/perl5.8.4 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/test....Can't locate Win32/SerialPort.pm in @INC (@INC contains: /home/hybrid/.cpanplus/5.8.4/build/THD7-1.1/blib/lib /home/hybrid/.cpanplus/5.8.4/build/THD7-1.1/blib/arch /home/hybrid/.cpanplus/5.8.4/build/THD7-1.1/blib /usr/lib/perl5/5.8.4/i486-linux /usr/lib/perl5/5.8.4/i486-linux /usr/lib/perl5/5.8.4 /usr/lib/perl5/site_perl/5.8.4/i486-linux /usr/lib/perl5/site_perl/5.8.4/i486-linux /usr/lib/perl5/site_perl/5.8.4 /usr/lib/perl5/site_perl/5.8.4/i486-linux /usr/lib/perl5/site_perl/5.8.4 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.4/i486-linux /usr/lib/perl5/5.8.4 /usr/lib/perl5/site_perl/5.8.4/i486-linux /usr/lib/perl5/site_perl/5.8.4 /usr/lib/perl5/site_perl .) at /home/hybrid/.cpanplus/5.8.4/build/THD7-1.1/blib/lib/THD7.pm line 6. Compilation failed in require at t/test.t line 6. BEGIN failed--compilation aborted at t/test.t line 6. dubious Test returned status 2 (wstat 512, 0x200) FAILED--1 test script could be run, alas--no output ever seen make: *** [test_dynamic] Error 2 MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Win32::SerialPort As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'KWITTMER ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Win32::SerialPort' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. -- Summary of my perl5 (revision 5 version 8 subversion 4) configuration: Platform: osname=linux, osvers=2.4.26, archname=i486-linux uname='linux midas 2.4.26 #6 wed apr 14 16:31:11 pdt 2004 i686 unknown unknown gnulinux ' config_args='-de -Dprefix=/usr -Dcccdlflags=-fPIC -Dinstallprefix=/usr -Doptimize=-O2 -march=i486 -mcpu=i686 -Dinc_version_list=5.8.3 5.8.2 5.8.1 5.8.0 -Darchname=i486-linux' hint=recommended, useposix=true, d_sigaction=define usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2 -march=i486 -mcpu=i686', cppflags='-fno-strict-aliasing -I/usr/local/include' ccversion='', gccversion='3.3.3', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc libc=/lib/libc-2.3.2.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.2' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
