Ouch.
This was reported as a PASS and the culprit most probably lies deep
down somewhere in Module::AutoInstall. Maybe also in CPAN.pm. Maybe in
CPAN::Reporter.
Note that I just added a new command "report" to CPAN.pm (will release
1.88_55 in a minute with it). I cannot imagine that it is to blame for
the false report here.
AutoInstall drives me mad. It goes into recursion and I had to watch
how the Test::Dependencies dependencies got build and tested over and
over again. Impressive that the recursion did stop at some point but
too late. The false report below gives a good impression of what I
saw.
This clearly needs more digging than I can afford today...
-------------------- Start of forwarded message --------------------
X-From-Line: [EMAIL PROTECTED] Mon Oct 16 06:35:12 2006
X-Spam-Checker-Version: SpamAssassin 3.1.4 (2006-07-26) on k75.linux.bogus
X-Spam-Level: *
X-Spam-Status: No, score=1.5 required=5.7 tests=AWL,BAYES_50,URIBL_OB_SURBL
autolearn=no version=3.1.4
X-Spam-Report:
* 0.0 BAYES_50 BODY: Bayesian spam probability is 40 to 60%
* [score: 0.5000]
* 3.0 URIBL_OB_SURBL Contains an URL listed in the OB SURBL blocklist
* [URIs: build.pl]
* -1.5 AWL AWL: From: address is in the auto white-list
Received: from lists.develooper.com (x6.develooper.com [63.251.223.186])
by franz.ak.mind.de (8.13.8/8.13.8/Debian-2) with SMTP id k9G4Yhbc007929
for <[EMAIL PROTECTED]>; Mon, 16 Oct 2006 06:34:50 +0200
Received: (qmail 4664 invoked by uid 514); 16 Oct 2006 04:34:35 -0000
Mailing-List: contact [EMAIL PROTECTED]; run by ezmlm
Precedence: bulk
list-help: <mailto:[EMAIL PROTECTED]>
list-unsubscribe: <mailto:[EMAIL PROTECTED]>
list-post: <mailto:[email protected]>
List-Id: <cpan-testers.perl.org>
Delivered-To: mailing list [email protected]
Received: (qmail 4657 invoked from network); 16 Oct 2006 04:34:35 -0000
Delivered-To: [email protected]
Received-SPF: pass (x1.develooper.com: local policy)
Message-Id: <[EMAIL PROTECTED]>
Date: Mon, 16 Oct 2006 06:33:00 +0200
Subject: PASS Test-Dependencies-0.08 i686-linux-64int 2.6.17-2-k7
From: [EMAIL PROTECTED] (Andreas J. Koenig)
To: [email protected]
Cc: [EMAIL PROTECTED]
X-Reported-Via: Test::Reporter 1.27, via CPAN::Reporter 0.28
X-Virus-Checked: Checked
X-Filter: mailagent [version 3.0 PL73] for [EMAIL PROTECTED]
Lines: 468
Xref: k75.linux.bogus cpan-testers:15560
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Zev Benjamin,
This is a computer-generated test report for Test-Dependencies-0.08, created
automatically by CPAN::Reporter, version 0.28.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
Sections of this report:
* Tester comments
* Prerequisites
* Test output
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
[none provided]
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
--------------------- ---- ---------
! B::PerlReq 0 n/a
File::Find::Rule 0 0.300
IPC::Cmd 0 0.320
Module::CoreList 0 2.090
! PerlReq::Utils 0 n/a
Test::Builder::Module 0 0.03_0200
Test::Builder::Tester 0.64 1.04_0200
YAML 0 0.620
------------------------------
TEST OUTPUT
------------------------------
Output from '/usr/bin/make test':
make[1]: Entering directory `/home/k/.cpan/build/Test-Dependencies-0.08'
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/bin/perl "-Iinc" Makefile.PL --config=
--installdeps=B::PerlReq,0,File::Find::Rule,0,IPC::Cmd,0,PerlReq::Utils,0
*** Installing dependencies...
CPAN: File::HomeDir loaded ok (v0.58)
*** Installing B::PerlReq...
[34mCPAN: Term::ANSIColor loaded ok (v1.11)
[0m[34mCPAN: Storable loaded ok (v2.15_02)
[0m[34mGoing to read /home/k/.cpan/Metadata
[0m[34m Database was generated on Mon, 16 Oct 2006 02:24:18 GMT
[0m[34mRunning install for module 'B::PerlReq'
[0m[34mRunning make for A/AT/ATOURBIN/rpm-build-perl-0.6.0.tar.gz
[0m[34mCPAN: Digest::SHA loaded ok (v5.44)
[0m[34mCPAN: Module::Signature loaded ok (v0.55)
[0m[34mSignature for /home/ftp/pub/CPAN/authors/id/A/AT/ATOURBIN/CHECKSUMS ok
[0m[34mCPAN: Compress::Zlib loaded ok (v2.00013)
[0m[34mChecksum for
/home/ftp/pub/CPAN/authors/id/A/AT/ATOURBIN/rpm-build-perl-0.6.0.tar.gz ok
[0m[34mScanning cache /home/k/.cpan/build for sizes
[0mrpm-build-perl-0.6.0/
rpm-build-perl-0.6.0/fake.pm
rpm-build-perl-0.6.0/README.ALT
rpm-build-perl-0.6.0/t/
rpm-build-perl-0.6.0/t/03-perlprov.t
rpm-build-perl-0.6.0/t/01-B-PerlReq.t
rpm-build-perl-0.6.0/t/02-perlreq.t
rpm-build-perl-0.6.0/rpm-build-perl.spec
rpm-build-perl-0.6.0/META.yml
rpm-build-perl-0.6.0/perl.prov
rpm-build-perl-0.6.0/perl5-alt-rpm-macros
rpm-build-perl-0.6.0/Changes
rpm-build-perl-0.6.0/MANIFEST
rpm-build-perl-0.6.0/lib/
rpm-build-perl-0.6.0/lib/B/
rpm-build-perl-0.6.0/lib/B/PerlReq.pm
rpm-build-perl-0.6.0/lib/PerlReq/
rpm-build-perl-0.6.0/lib/PerlReq/Utils.pm
rpm-build-perl-0.6.0/perl.req
rpm-build-perl-0.6.0/Makefile.PL
rpm-build-perl-0.6.0/README
[34mRemoving previously used /home/k/.cpan/build/rpm-build-perl-0.6.0
[0m[1;31mPackage came without SIGNATURE
[0m[34m
CPAN.pm: Going to build A/AT/ATOURBIN/rpm-build-perl-0.6.0.tar.gz
[0m[34mCPAN: YAML::Syck loaded ok (v0.71)
[0mChecking if your kit is complete...
Looks good
Writing Makefile for rpm-build-perl
make[2]: Entering directory `/home/k/.cpan/build/rpm-build-perl-0.6.0'
cp fake.pm blib/lib/fake.pm
cp lib/B/PerlReq.pm blib/lib/B/PerlReq.pm
cp lib/PerlReq/Utils.pm blib/lib/PerlReq/Utils.pm
cp perl.prov blib/script/perl.prov
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/perl.prov
cp perl.req blib/script/perl.req
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/perl.req
Manifying blib/man1/perl.prov.1
Manifying blib/man1/perl.req.1
Manifying blib/man3/B::PerlReq.3
Manifying blib/man3/PerlReq::Utils.3
make[2]: Leaving directory `/home/k/.cpan/build/rpm-build-perl-0.6.0'
[34m /usr/bin/make -- OK
[0m[34mRunning make test
[0m[34mCPAN: CPAN::Reporter loaded ok (v0.28)
[0mmake[2]: Entering directory `/home/k/.cpan/build/rpm-build-perl-0.6.0'
PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib',
'blib/arch')" t/*.t
t/01-B-PerlReq....Bareword "Carp::confess" not allowed while "strict subs" in
use at /home/k/.cpan/build/rpm-build-perl-0.6.0/blib/lib/B/PerlReq.pm line 332.
Compilation failed in require at t/01-B-PerlReq.t line 4.
BEGIN failed--compilation aborted at t/01-B-PerlReq.t line 4.
# Looks like your test died before it could output anything.
dubious
Test returned status 255 (wstat 65280, 0xff00)
t/02-perlreq......
# Failed test '/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5/attributes.pm dependencies'
# at t/02-perlreq.t line 33.
# got: 'perl(warnings.pm)'
# expected: ''
# Failed test '/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5/i686-linux-64int/POSIX.pm dependencies'
# at t/02-perlreq.t line 33.
# got: 'perl(AutoLoader.pm) perl(base.pm) perl(Fcntl.pm)
perl(Tie/Hash.pm) perl(XSLoader.pm)'
# expected: 'perl(AutoLoader.pm) perl(XSLoader.pm)'
# Looks like you failed 2 tests of 30.
dubious
Test returned status 2 (wstat 512, 0x200)
DIED. FAILED tests 2, 29
Failed 2/30 tests, 93.33% okay
t/03-perlprov.....
# Failed test '/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5/i686-linux-64int/POSIX.pm dependencies'
# at t/03-perlprov.t line 32.
# 'perl(POSIX.pm) = 1.110'
# doesn't match '(?-xism:^perl\(POSIX\.pm\)\ \=\ 1\.0(\d|$))'
# Looks like you failed 1 test of 45.
dubious
Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 44
Failed 1/45 tests, 97.78% okay
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/01-B-PerlReq.t 255 65280 ?? ?? ??
t/02-perlreq.t 2 512 30 2 2 29
t/03-perlprov.t 1 256 45 1 44
Failed 3/3 test scripts. 3/75 subtests failed.
Files=3, Tests=75, 7 wallclock secs ( 6.32 cusr + 0.54 csys = 6.86 CPU)
Failed 3/3 test programs. 3/75 subtests failed.
make[2]: *** [test_dynamic] Error 1
make[2]: Leaving directory `/home/k/.cpan/build/rpm-build-perl-0.6.0'
Test::Reporter: debug
Test::Reporter: from
Test::Reporter: debug
Test::Reporter: mx
Test::Reporter: distribution
Test::Reporter: comments
Test::Reporter: via
Test::Reporter: debug
Test::Reporter: grade
Preparing a test report for rpm-build-perl-0.6.0
Test result is 'fail': Distribution had failing tests.
Do you want to CC the the module author? (yes/no) [no] Test::Reporter: debug
Test::Reporter: grade
Do you want to edit the test report? (yes/no) [no] Test::Reporter: debug
Test::Reporter: grade
Do you want to send the test report? (yes/no) [no] Test report not sent
[1;31m /usr/bin/make test -- NOT OK
[0m[34mRunning make install
[0m[34m make test had returned bad status, won't install without force
[0m*** B::PerlReq installation failed.
*** Installing File::Find::Rule...
[34mRunning install for module 'File::Find::Rule'
[0m[34mRunning make for R/RC/RCLAMP/File-Find-Rule-0.30.tar.gz
[0m[34mSignature for /home/ftp/pub/CPAN/authors/id/R/RC/RCLAMP/CHECKSUMS ok
[0m[34mChecksum for
/home/ftp/pub/CPAN/authors/id/R/RC/RCLAMP/File-Find-Rule-0.30.tar.gz ok
[0mFile-Find-Rule-0.30/
File-Find-Rule-0.30/t/
File-Find-Rule-0.30/t/lib/
File-Find-Rule-0.30/t/lib/File/
File-Find-Rule-0.30/t/lib/File/Find/
File-Find-Rule-0.30/t/lib/File/Find/Rule/
File-Find-Rule-0.30/t/lib/File/Find/Rule/Test/
File-Find-Rule-0.30/t/lib/File/Find/Rule/Test/ATeam.pm
File-Find-Rule-0.30/t/foobar
File-Find-Rule-0.30/t/File-Find-Rule.t
File-Find-Rule-0.30/t/findrule.t
File-Find-Rule-0.30/findrule
File-Find-Rule-0.30/META.yml
File-Find-Rule-0.30/lib/
File-Find-Rule-0.30/lib/File/
File-Find-Rule-0.30/lib/File/Find/
File-Find-Rule-0.30/lib/File/Find/Rule.pm
File-Find-Rule-0.30/lib/File/Find/Rule/
File-Find-Rule-0.30/lib/File/Find/Rule/Extending.pod
File-Find-Rule-0.30/lib/File/Find/Rule/Procedural.pod
File-Find-Rule-0.30/Changes
File-Find-Rule-0.30/MANIFEST
File-Find-Rule-0.30/README
File-Find-Rule-0.30/Makefile.PL
File-Find-Rule-0.30/Build.PL
[34mRemoving previously used /home/k/.cpan/build/File-Find-Rule-0.30
[0m[1;31mPackage came without SIGNATURE
[0m[34mCPAN: Module::Build loaded ok (v0.2805)
[0m[34m
CPAN.pm: Going to build R/RC/RCLAMP/File-Find-Rule-0.30.tar.gz
[0mChecking whether your kit is complete...
Looks good
Checking prerequisites...
Looks good
Creating new 'Build' script for 'File-Find-Rule' version '0.30'
lib/File/Find/Rule.pm -> blib/lib/File/Find/Rule.pm
lib/File/Find/Rule/Extending.pod -> blib/lib/File/Find/Rule/Extending.pod
lib/File/Find/Rule/Procedural.pod -> blib/lib/File/Find/Rule/Procedural.pod
findrule -> blib/script/findrule
Manifying blib/script/findrule -> blib/bindoc/findrule.1
Manifying blib/lib/File/Find/Rule/Procedural.pod ->
blib/libdoc/File::Find::Rule::Procedural.3
Manifying blib/lib/File/Find/Rule/Extending.pod ->
blib/libdoc/File::Find::Rule::Extending.3
Manifying blib/lib/File/Find/Rule.pm -> blib/libdoc/File::Find::Rule.3
[34m ./Build -- OK
[0m[34mRunning Build test
[0mt/File-Find-Rule....ok
t/findrule..........ok
All tests successful.
Files=2, Tests=47, 2 wallclock secs ( 1.19 cusr + 0.07 csys = 1.26 CPU)
Test::Reporter: debug
Test::Reporter: from
Test::Reporter: debug
Test::Reporter: mx
Test::Reporter: distribution
Test::Reporter: comments
Test::Reporter: via
Test::Reporter: debug
Test::Reporter: grade
Preparing a test report for File-Find-Rule-0.30
Test result is 'pass': All tests successful.
Do you want to CC the the module author? (yes/no) [no] Test::Reporter: debug
Test::Reporter: grade
Do you want to edit the test report? (yes/no) [no] Test::Reporter: debug
Test::Reporter: grade
Do you want to send the test report? (yes/no) [no] Test report not sent
[34m ./Build test -- OK
[0m[34mRunning Build install
[0mInstalling /home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/man/man1/findrule.1
Installing /home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5/File/Find/Rule.pm
Installing /home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5/File/Find/Rule/Extending.pod
Installing /home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5/File/Find/Rule/Procedural.pod
Installing /home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/man/man3/File::Find::Rule::Procedural.3
Installing /home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/man/man3/File::Find::Rule::Extending.3
Installing /home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/man/man3/File::Find::Rule.3
Installing /home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/bin/findrule
Writing /home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5/i686-linux-64int/auto/File/Find/Rule/.packlist
[34m ./Build install --uninst 1 -- OK
[0m*** File::Find::Rule successfully installed.
*** Installing IPC::Cmd...
[34mRunning install for module 'IPC::Cmd'
[0m[34mRunning make for K/KA/KANE/IPC-Cmd-0.32.tar.gz
[0m[34mSignature for /home/ftp/pub/CPAN/authors/id/K/KA/KANE/CHECKSUMS ok
[0m[34mChecksum for /home/ftp/pub/CPAN/authors/id/K/KA/KANE/IPC-Cmd-0.32.tar.gz
ok
[0mIPC-Cmd-0.32/
IPC-Cmd-0.32/CHANGES
IPC-Cmd-0.32/lib/
IPC-Cmd-0.32/lib/IPC/
IPC-Cmd-0.32/lib/IPC/Cmd.pm
IPC-Cmd-0.32/Makefile.PL
IPC-Cmd-0.32/MANIFEST
IPC-Cmd-0.32/META.yml
IPC-Cmd-0.32/README
IPC-Cmd-0.32/t/
IPC-Cmd-0.32/t/01_IPC-Cmd.t
IPC-Cmd-0.32/t/02_Interactive.t
IPC-Cmd-0.32/t/src/
IPC-Cmd-0.32/t/src/child.pl
[34mRemoving previously used /home/k/.cpan/build/IPC-Cmd-0.32
[0m[1;31mPackage came without SIGNATURE
[0m[34m
CPAN.pm: Going to build K/KA/KANE/IPC-Cmd-0.32.tar.gz
[0mChecking if your kit is complete...
Looks good
Writing Makefile for IPC::Cmd
make[2]: Entering directory `/home/k/.cpan/build/IPC-Cmd-0.32'
cp lib/IPC/Cmd.pm blib/lib/IPC/Cmd.pm
Manifying blib/man3/IPC::Cmd.3
make[2]: Leaving directory `/home/k/.cpan/build/IPC-Cmd-0.32'
[34m /usr/bin/make -- OK
[0m[34mRunning make test
[0mmake[2]: Entering directory `/home/k/.cpan/build/IPC-Cmd-0.32'
PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib',
'blib/arch')" t/*.t
t/01_IPC-Cmd........ok
28/146 skipped: various reasons
t/02_Interactive....skipped
all skipped: No interactive tests from harness
All tests successful, 1 test and 28 subtests skipped.
Files=2, Tests=146, 1 wallclock secs ( 0.92 cusr + 0.23 csys = 1.15 CPU)
make[2]: Leaving directory `/home/k/.cpan/build/IPC-Cmd-0.32'
Test::Reporter: debug
Test::Reporter: from
Test::Reporter: debug
Test::Reporter: mx
Test::Reporter: distribution
Test::Reporter: comments
Test::Reporter: via
Test::Reporter: debug
Test::Reporter: grade
Preparing a test report for IPC-Cmd-0.32
Test result is 'pass': All tests successful.
Do you want to CC the the module author? (yes/no) [no] Test::Reporter: debug
Test::Reporter: grade
Do you want to edit the test report? (yes/no) [no] Test::Reporter: debug
Test::Reporter: grade
Do you want to send the test report? (yes/no) [no] Test report not sent
[34m /usr/bin/make test -- OK
[0m[34mRunning make install
[0mmake[2]: Entering directory `/home/k/.cpan/build/IPC-Cmd-0.32'
Installing /home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5/IPC/Cmd.pm
Installing /home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/man/man3/IPC::Cmd.3
Writing /home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5/i686-linux-64int/auto/IPC/Cmd/.packlist
Appending installation info to
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5/i686-linux-64int/perllocal.pod
make[2]: Leaving directory `/home/k/.cpan/build/IPC-Cmd-0.32'
[34m /usr/bin/make install UNINST=1 -- OK
[0m*** IPC::Cmd successfully installed.
*** Installing PerlReq::Utils...
[34mRunning install for module 'PerlReq::Utils'
[0m[34mRunning make for A/AT/ATOURBIN/rpm-build-perl-0.6.0.tar.gz
[0m[34m Is already unwrapped into directory
/home/k/.cpan/build/rpm-build-perl-0.6.0
[0m[34m Has already been processed within this session
[0m[34mRunning make test
[0m[34m Won't repeat unsuccessful test during this command
[0m[34mRunning make install
[0m[34m make test had returned bad status, won't install without force
[0m*** PerlReq::Utils installation failed.
*** Module::AutoInstall installation finished.
PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc',
'blib/lib', 'blib/arch')" t/00-load-basic.t t/01-load-with-exclude.t
t/02-dependencies.t t/03-empty.t t/boilerplate.t t/pod-coverage.t t/pod.t
t/00-load-basic...........
# Failed test 'use Test::Dependencies;'
# at t/00-load-basic.t line 9.
# STDOUT is:
# not ok 1 - use Test::Dependencies;
#
# not:
# ok 1 - use Test::Dependencies;
#
# as expected
# STDERR is:
# # Failed test 'use Test::Dependencies;'
# # at t/00-load-basic.t line 8.
# # Tried to use 'Test::Dependencies'.
# # Error: Can't locate B/PerlReq.pm in @INC (@INC contains:
/home/k/.cpan/build/Test-Dependencies-0.08/inc
/home/k/.cpan/build/Test-Dependencies-0.08/blib/lib
/home/k/.cpan/build/Test-Dependencies-0.08/blib/arch
/home/k/.cpan/build/IPC-Cmd-0.32/blib/arch
/home/k/.cpan/build/IPC-Cmd-0.32/blib/lib
/home/k/.cpan/build/File-Find-Rule-0.30/blib/arch
/home/k/.cpan/build/File-Find-Rule-0.30/blib/lib
/home/k/.cpan/build/Module-Load-Conditional-0.12/blib/arch
/home/k/.cpan/build/Module-Load-Conditional-0.12/blib/lib
/home/k/.cpan/build/Number-Compare-0.01/blib/arch
/home/k/.cpan/build/Number-Compare-0.01/blib/lib
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5/i68!
6-linux-64int /home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5 .
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5) at
/home/k/.cpan/build/Test-Dependencies-0.08/blib/lib/Test/Dependencies.pm line 6.
# # BEGIN failed--compilation aborted at t/00-load-basic.t line 8.
# # Compilation failed in require at (eval 3) line 2.
# # BEGIN failed--compilation aborted at (eval 3) line 2.
#
# not:
#
# as expected
FAILED test 1
Failed 1/1 tests, 0.00% okay
t/01-load-with-exclude....
# Failed test 'use Test::Dependencies;'
# at t/01-load-with-exclude.t line 10.
# STDOUT is:
# not ok 1 - use Test::Dependencies;
#
# not:
# ok 1 - use Test::Dependencies;
#
# as expected
# STDERR is:
# # Failed test 'use Test::Dependencies;'
# # at t/01-load-with-exclude.t line 8.
# # Tried to use 'Test::Dependencies'.
# # Error: Can't locate B/PerlReq.pm in @INC (@INC contains:
/home/k/.cpan/build/Test-Dependencies-0.08/inc
/home/k/.cpan/build/Test-Dependencies-0.08/blib/lib
/home/k/.cpan/build/Test-Dependencies-0.08/blib/arch
/home/k/.cpan/build/IPC-Cmd-0.32/blib/arch
/home/k/.cpan/build/IPC-Cmd-0.32/blib/lib
/home/k/.cpan/build/File-Find-Rule-0.30/blib/arch
/home/k/.cpan/build/File-Find-Rule-0.30/blib/lib
/home/k/.cpan/build/Module-Load-Conditional-0.12/blib/arch
/home/k/.cpan/build/Module-Load-Conditional-0.12/blib/lib
/home/k/.cpan/build/Number-Compare-0.01/blib/arch
/home/k/.cpan/build/Number-Compare-0.01/blib/lib
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5/i68!
6-linux-64int /home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5 .
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5) at
/home/k/.cpan/build/Test-Dependencies-0.08/blib/lib/Test/Dependencies.pm line 6.
# # BEGIN failed--compilation aborted at t/01-load-with-exclude.t line 8.
# # Compilation failed in require at (eval 3) line 2.
# # BEGIN failed--compilation aborted at (eval 3) line 2.
#
# not:
#
# as expected
FAILED test 1
Failed 1/1 tests, 0.00% okay
t/02-dependencies.........Can't locate B/PerlReq.pm in @INC (@INC contains:
/home/k/.cpan/build/Test-Dependencies-0.08/inc
/home/k/.cpan/build/Test-Dependencies-0.08/blib/lib
/home/k/.cpan/build/Test-Dependencies-0.08/blib/arch
/home/k/.cpan/build/IPC-Cmd-0.32/blib/arch
/home/k/.cpan/build/IPC-Cmd-0.32/blib/lib
/home/k/.cpan/build/File-Find-Rule-0.30/blib/arch
/home/k/.cpan/build/File-Find-Rule-0.30/blib/lib
/home/k/.cpan/build/Module-Load-Conditional-0.12/blib/arch
/home/k/.cpan/build/Module-Load-Conditional-0.12/blib/lib
/home/k/.cpan/build/Number-Compare-0.01/blib/arch
/home/k/.cpan/build/Number-Compare-0.01/blib/lib
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl!
/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5 .
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5 .) at
/home/k/.cpan/build/Test-Dependencies-0.08/blib/lib/Test/Dependencies.pm line 6.
BEGIN failed--compilation aborted at
/home/k/.cpan/build/Test-Dependencies-0.08/blib/lib/Test/Dependencies.pm line 6.
Compilation failed in require at t/02-dependencies.t line 4.
BEGIN failed--compilation aborted at t/02-dependencies.t line 4.
dubious
Test returned status 2 (wstat 512, 0x200)
t/03-empty................Can't locate B/PerlReq.pm in @INC (@INC contains:
/home/k/.cpan/build/Test-Dependencies-0.08/inc
/home/k/.cpan/build/Test-Dependencies-0.08/blib/lib
/home/k/.cpan/build/Test-Dependencies-0.08/blib/arch
/home/k/.cpan/build/IPC-Cmd-0.32/blib/arch
/home/k/.cpan/build/IPC-Cmd-0.32/blib/lib
/home/k/.cpan/build/File-Find-Rule-0.30/blib/arch
/home/k/.cpan/build/File-Find-Rule-0.30/blib/lib
/home/k/.cpan/build/Module-Load-Conditional-0.12/blib/arch
/home/k/.cpan/build/Module-Load-Conditional-0.12/blib/lib
/home/k/.cpan/build/Number-Compare-0.01/blib/arch
/home/k/.cpan/build/Number-Compare-0.01/blib/lib
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl!
/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5 .
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/5.9.5
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5/i686-linux-64int
/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED]/lib/site_perl/5.9.5 .) at
/home/k/.cpan/build/Test-Dependencies-0.08/blib/lib/Test/Dependencies.pm line 6.
BEGIN failed--compilation aborted at
/home/k/.cpan/build/Test-Dependencies-0.08/blib/lib/Test/Dependencies.pm line 6.
Compilation failed in require at t/03-empty.t line 4.
BEGIN failed--compilation aborted at t/03-empty.t line 4.
# Looks like your test died before it could output anything.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-2
Failed 2/2 tests, 0.00% okay
t/boilerplate.............ok
t/pod-coverage............skipped
all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.....................skipped
all skipped: Test::Pod 1.14 required for testing POD
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/00-load-basic.t 1 1 1
t/01-load-with-exclude.t 1 1 1
t/02-dependencies.t 2 512 ?? ?? ??
t/03-empty.t 255 65280 2 4 1-2
2 tests skipped.
Failed 4/7 test scripts. 4/7 subtests failed.
Files=7, Tests=7, 0 wallclock secs ( 0.47 cusr + 0.07 csys = 0.54 CPU)
Failed 4/7 test programs. 4/7 subtests failed.
make[1]: *** [test_dynamic] Error 255
make[1]: Leaving directory `/home/k/.cpan/build/Test-Dependencies-0.08'
--
Summary of my perl5 (revision 5 version 9 subversion 5) configuration:
Platform:
osname=linux, osvers=2.6.17-2-k7, archname=i686-linux-64int
uname='linux k75 2.6.17-2-k7 #1 smp thu aug 31 13:27:53 utc 2006 i686
gnulinux '
config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/perl/pIHB6xG/[EMAIL
PROTECTED] -Dinstallusrbinperl=n -Uversiononly -Doptimize=-g -des
-Duse64bitint -Dusedevel'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DDEBUGGING -fno-strict-aliasing -pipe
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g',
cppflags='-DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.1.2 20060901 (prerelease) (Debian 4.1.1-13)',
gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
-------------------- End of forwarded message --------------------
--
andreas
