This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear MLEHMANN, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Tue Oct 31 12:23:51 2006] Trying to get 'http://www.cpan.org/authors/id/M/ML/MLEHMANN/IO-AIO-2.2.tar.gz' [MSG] [Tue Oct 31 12:23:53 2006] Trying to get 'http://www.cpan.org/authors/id/M/ML/MLEHMANN/CHECKSUMS' [MSG] [Tue Oct 31 12:23:54 2006] Checksum matches for 'IO-AIO-2.2.tar.gz' [MSG] [Tue Oct 31 12:23:54 2006] Extracted 'IO-AIO-2.2/' [MSG] [Tue Oct 31 12:23:54 2006] Extracted 'IO-AIO-2.2/t/' [MSG] [Tue Oct 31 12:23:54 2006] Extracted 'IO-AIO-2.2/t/06_group.t' [MSG] [Tue Oct 31 12:23:54 2006] Extracted 'IO-AIO-2.2/t/07_feeder.t' [MSG] [Tue Oct 31 12:23:54 2006] Extracted 'IO-AIO-2.2/t/02_read.t' [MSG] [Tue Oct 31 12:23:54 2006] Extracted 'IO-AIO-2.2/t/04_fork.t' [MSG] [Tue Oct 31 12:23:54 2006] Extracted 'IO-AIO-2.2/t/05_readdir.t' [MSG] [Tue Oct 31 12:23:54 2006] Extracted 'IO-AIO-2.2/t/03_errors.t' [MSG] [Tue Oct 31 12:23:54 2006] Extracted 'IO-AIO-2.2/t/01_stat.t' [MSG] [Tue Oct 31 12:23:54 2006] Extracted 'IO-AIO-2.2/t/aio_test_common.pm' [MSG] [Tue Oct 31 12:23:54 2006] Extracted 'IO-AIO-2.2/t/00_load.t' [MSG] [Tue Oct 31 12:23:54 2006] Extracted 'IO-AIO-2.2/genac' [MSG] [Tue Oct 31 12:23:54 2006] Extracted 'IO-AIO-2.2/README' [MSG] [Tue Oct 31 12:23:54 2006] Extracted 'IO-AIO-2.2/autoconf/' [MSG] [Tue Oct 31 12:23:54 2006] Extracted 'IO-AIO-2.2/autoconf/configure' [MSG] [Tue Oct 31 12:23:54 2006] Extracted 'IO-AIO-2.2/autoconf/configure.ac' [MSG] [Tue Oct 31 12:23:55 2006] Extracted 'IO-AIO-2.2/autoconf/config.h.in' [MSG] [Tue Oct 31 12:23:55 2006] Extracted 'IO-AIO-2.2/Changes' [MSG] [Tue Oct 31 12:23:55 2006] Extracted 'IO-AIO-2.2/Makefile.PL' [MSG] [Tue Oct 31 12:23:55 2006] Extracted 'IO-AIO-2.2/META.yml' [MSG] [Tue Oct 31 12:23:55 2006] Extracted 'IO-AIO-2.2/typemap' [MSG] [Tue Oct 31 12:23:55 2006] Extracted 'IO-AIO-2.2/autoconf.pm' [MSG] [Tue Oct 31 12:23:55 2006] Extracted 'IO-AIO-2.2/COPYING' [MSG] [Tue Oct 31 12:23:55 2006] Extracted 'IO-AIO-2.2/AIO.pm' [MSG] [Tue Oct 31 12:23:55 2006] Extracted 'IO-AIO-2.2/AIO.xs' [MSG] [Tue Oct 31 12:23:55 2006] Extracted 'IO-AIO-2.2/MANIFEST' [MSG] [Tue Oct 31 12:23:55 2006] Extracted 'IO::AIO' to '/home/chris/.cpanplus/5.8.8/build/IO-AIO-2.2' [MSG] [Tue Oct 31 12:24:00 2006] checking for gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ANSI C... none needed checking for readahead... no checking for fdatasync... yes checking for pread and pwrite... yes checking for readdir_r... yes checking for sendfile... no configure: creating ./config.status config.status: creating config.h Checking if your kit is complete... Looks good Writing Makefile for IO::AIO [MSG] [Tue Oct 31 12:24:00 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Tue Oct 31 12:24:06 2006] cp autoconf.pm blib/lib/IO/autoconf.pm cp AIO.pm blib/lib/IO/AIO.pm /home/chris/dev/perl588/bin/perl /home/chris/dev/perl588/lib/5.8.8/ExtUtils/xsubpp -typemap /home/chris/dev/perl588/lib/5.8.8/ExtUtils/typemap -typemap typemap AIO.xs > AIO.xsc && mv AIO.xsc AIO.c cc -c -fno-strict-aliasing -pipe -I/usr/pkg/include -O -DVERSION=\"2.2\" -DXS_VERSION=\"2.2\" -DPIC -fPIC "-I/home/chris/dev/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int/CORE" AIO.c Running Mkbootstrap for IO::AIO () chmod 644 AIO.bs rm -f blib/arch/auto/IO/AIO/AIO.so LD_RUN_PATH="/usr/lib" cc --whole-archive -shared -L/usr/pkg/lib AIO.o -o blib/arch/auto/IO/AIO/AIO.so \ -lpthread -lrt \ chmod 755 blib/arch/auto/IO/AIO/AIO.so cp AIO.bs blib/arch/auto/IO/AIO/AIO.bs chmod 644 blib/arch/auto/IO/AIO/AIO.bs Manifying blib/man3/IO::AIO.3 [ERROR] [Tue Oct 31 12:24:07 2006] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/chris/dev/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_load.......ok t/01_stat.......ok t/02_read.......ok t/03_errors.....ok t/04_fork.......Confused test output: test 4 answered after test 5 Confused test output: test 5 answered after test 6 Confused test output: test 6 answered after test 7 Confused test output: test 7 answered after test 8 FAILED tests 3-4 Failed 2/9 tests, 77.78% okay t/05_readdir....ok t/06_group......ok t/07_feeder.....ok Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/04_fork.t 9 2 3-4 Failed 1/8 test scripts. 2/63 subtests failed. Files=8, Tests=63, 1 wallclock secs ( 0.68 cusr + 0.33 csys = 1.01 CPU) Failed 1/8 test programs. 2/63 subtests failed. gmake: *** [test_dynamic] Error 25 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=netbsd, osvers=3.0, archname=i386-netbsd-thread-multi-64int uname='netbsd canker.bingosnet.co.uk 3.0 netbsd 3.0 (generic_laptop) #0: mon dec 19 01:08:52 utc 2005 [EMAIL PROTECTED]:homebuildsabnetbsd-3-0-releasei386200512182024z-objhomebuildsabnetbsd-3-0-releasesrcsysarchi386compilegeneric_laptop i386 ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include', optimize='-O', cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include' ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib' libpth=/usr/pkg/lib /lib /usr/lib libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E ' cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
