This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear ADAMK,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.076. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Thu Nov 2 19:42:09 2006] Trying to get
'http://www.cpan.org/authors/id/A/AD/ADAMK/Chart-Math-Axis-1.00.tar.gz'
[MSG] [Thu Nov 2 19:42:10 2006] Trying to get
'http://www.cpan.org/authors/id/A/AD/ADAMK/CHECKSUMS'
[MSG] [Thu Nov 2 19:42:11 2006] Checksum matches for
'Chart-Math-Axis-1.00.tar.gz'
[MSG] [Thu Nov 2 19:42:11 2006] Extracted 'Chart-Math-Axis-1.00/'
[MSG] [Thu Nov 2 19:42:11 2006] Extracted 'Chart-Math-Axis-1.00/t/'
[MSG] [Thu Nov 2 19:42:11 2006] Extracted 'Chart-Math-Axis-1.00/t/02_main.t'
[MSG] [Thu Nov 2 19:42:11 2006] Extracted 'Chart-Math-Axis-1.00/t/01_compile.t'
[MSG] [Thu Nov 2 19:42:11 2006] Extracted 'Chart-Math-Axis-1.00/t/99_author.t'
[MSG] [Thu Nov 2 19:42:11 2006] Extracted
'Chart-Math-Axis-1.00/t/03_tainting.t'
[MSG] [Thu Nov 2 19:42:11 2006] Extracted 'Chart-Math-Axis-1.00/lib/'
[MSG] [Thu Nov 2 19:42:11 2006] Extracted 'Chart-Math-Axis-1.00/lib/Chart/'
[MSG] [Thu Nov 2 19:42:11 2006] Extracted
'Chart-Math-Axis-1.00/lib/Chart/Math/'
[MSG] [Thu Nov 2 19:42:11 2006] Extracted
'Chart-Math-Axis-1.00/lib/Chart/Math/Axis.pm'
[MSG] [Thu Nov 2 19:42:11 2006] Extracted 'Chart-Math-Axis-1.00/Changes'
[MSG] [Thu Nov 2 19:42:11 2006] Extracted 'Chart-Math-Axis-1.00/MANIFEST'
[MSG] [Thu Nov 2 19:42:11 2006] Extracted 'Chart-Math-Axis-1.00/LICENSE'
[MSG] [Thu Nov 2 19:42:11 2006] Extracted 'Chart-Math-Axis-1.00/Makefile.PL'
[MSG] [Thu Nov 2 19:42:11 2006] Extracted 'Chart-Math-Axis-1.00/README'
[MSG] [Thu Nov 2 19:42:11 2006] Extracted 'Chart-Math-Axis-1.00/META.yml'
[MSG] [Thu Nov 2 19:42:11 2006] Extracted 'Chart::Math::Axis' to
'/home/hybrid/perl588/.cpanplus/5.8.8/build/Chart-Math-Axis-1.00'
[MSG] [Thu Nov 2 19:42:13 2006] Checking if your kit is complete...
Looks good
Warning: prerequisite Clone 0.13 not found.
Writing Makefile for Chart::Math::Axis
[MSG] [Thu Nov 2 19:42:13 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Thu Nov 2 19:42:13 2006] Module 'Chart::Math::Axis' requires 'Clone'
version '0.13' to be installed
[MSG] [Thu Nov 2 19:42:13 2006] Trying to get
'http://www.cpan.org/authors/id/R/RD/RDF/Clone-0.22.tar.gz'
[MSG] [Thu Nov 2 19:42:14 2006] Trying to get
'http://www.cpan.org/authors/id/R/RD/RDF/CHECKSUMS'
[MSG] [Thu Nov 2 19:42:14 2006] Checksum matches for 'Clone-0.22.tar.gz'
[MSG] [Thu Nov 2 19:42:15 2006] Extracted 'Clone-0.22/'
[MSG] [Thu Nov 2 19:42:15 2006] Extracted 'Clone-0.22/t/'
[MSG] [Thu Nov 2 19:42:15 2006] Extracted 'Clone-0.22/t/04tie.t'
[MSG] [Thu Nov 2 19:42:15 2006] Extracted 'Clone-0.22/t/07magic.t'
[MSG] [Thu Nov 2 19:42:15 2006] Extracted 'Clone-0.22/t/05dtype.t'
[MSG] [Thu Nov 2 19:42:15 2006] Extracted 'Clone-0.22/t/tied.pl'
[MSG] [Thu Nov 2 19:42:15 2006] Extracted 'Clone-0.22/t/dclone.t'
[MSG] [Thu Nov 2 19:42:15 2006] Extracted 'Clone-0.22/t/06refcnt.t'
[MSG] [Thu Nov 2 19:42:15 2006] Extracted 'Clone-0.22/t/03scalar.t'
[MSG] [Thu Nov 2 19:42:15 2006] Extracted 'Clone-0.22/t/01array.t'
[MSG] [Thu Nov 2 19:42:15 2006] Extracted 'Clone-0.22/t/dump.pl'
[MSG] [Thu Nov 2 19:42:15 2006] Extracted 'Clone-0.22/t/02hash.t'
[MSG] [Thu Nov 2 19:42:15 2006] Extracted 'Clone-0.22/Changes'
[MSG] [Thu Nov 2 19:42:15 2006] Extracted 'Clone-0.22/MANIFEST'
[MSG] [Thu Nov 2 19:42:15 2006] Extracted 'Clone-0.22/Clone.pm'
[MSG] [Thu Nov 2 19:42:15 2006] Extracted 'Clone-0.22/META.yml'
[MSG] [Thu Nov 2 19:42:15 2006] Extracted 'Clone-0.22/Clone.xs'
[MSG] [Thu Nov 2 19:42:15 2006] Extracted 'Clone-0.22/Makefile.PL'
[MSG] [Thu Nov 2 19:42:15 2006] Extracted 'Clone' to
'/home/hybrid/perl588/.cpanplus/5.8.8/build/Clone-0.22'
[MSG] [Thu Nov 2 19:42:16 2006] Checking if your kit is complete...
Looks good
Writing Makefile for Clone
[MSG] [Thu Nov 2 19:42:16 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Thu Nov 2 19:42:23 2006] cp Clone.pm blib/lib/Clone.pm
AutoSplitting blib/lib/Clone.pm (blib/lib/auto/Clone)
/home/hybrid/perl588/bin/perl /home/hybrid/perl588/lib/5.8.8/ExtUtils/xsubpp
-typemap /home/hybrid/perl588/lib/5.8.8/ExtUtils/typemap Clone.xs > Clone.xsc
&& mv Clone.xsc Clone.c
cc -c -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing
-pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O3
-DVERSION=\"0.22\" -DXS_VERSION=\"0.22\" -fpic
"-I/home/hybrid/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld/CORE"
Clone.c
Running Mkbootstrap for Clone ()
chmod 644 Clone.bs
rm -f blib/arch/auto/Clone/Clone.so
cc -shared -L/usr/local/lib Clone.o -o blib/arch/auto/Clone/Clone.so \
\
chmod 755 blib/arch/auto/Clone/Clone.so
cp Clone.bs blib/arch/auto/Clone/Clone.bs
chmod 644 blib/arch/auto/Clone/Clone.bs
Manifying blib/man3/Clone.3
[MSG] [Thu Nov 2 19:42:26 2006] MAKE TEST passed: PERL_DL_NONLAZY=1
/home/hybrid/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0,
'blib/lib', 'blib/arch')" t/*.t
t/01array.....ok
t/02hash......ok
t/03scalar....ok
t/04tie.......ok
t/05dtype.....ok
t/06refcnt....ok
t/07magic.....ok
1/3 skipped: various reasons
t/dclone......ok
All tests successful, 1 subtest skipped.
Files=8, Tests=57, 3 wallclock secs ( 1.45 cusr + 0.13 csys = 1.58 CPU)
[MSG] [Thu Nov 2 19:42:27 2006] Successfully sent 'pass' report for
'Clone-0.22'
[MSG] [Thu Nov 2 19:42:30 2006] cp lib/Chart/Math/Axis.pm
blib/lib/Chart/Math/Axis.pm
Manifying blib/man3/Chart::Math::Axis.3
[ERROR] [Thu Nov 2 19:42:32 2006] MAKE TEST failed: Illegal seek
PERL_DL_NONLAZY=1 /home/hybrid/perl588/bin/perl "-MExtUtils::Command::MM" "-e"
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01_compile.....
# Failed test 'use Chart::Math::Axis;'
# in t/01_compile.t at line 15.
# Tried to use 'Chart::Math::Axis'.
# Error: Can't locate Params/Util.pm in @INC (@INC contains:
/home/hybrid/perl588/.cpanplus/5.8.8/build/Chart-Math-Axis-1.00/blib/lib
/home/hybrid/perl588/.cpanplus/5.8.8/build/Chart-Math-Axis-1.00/blib/arch
/home/hybrid/perl588/.cpanplus/5.8.8/build/Clone-0.22/blib/lib
/home/hybrid/perl588/.cpanplus/5.8.8/build/Clone-0.22/blib/arch
/home/hybrid/perl588/.cpanplus/5.8.8/build/Clone-0.22/blib
/home/hybrid/perl588/.cpanplus/5.8.8/build/Chart-Math-Axis-1.00/blib
/home/hybrid/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld
/home/hybrid/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld
/home/hybrid/perl588/lib/5.8.8
/home/hybrid/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld
/home/hybrid/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld
/home/hybrid/perl588/lib/site_perl/5.8.8
/home/hybrid/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld
/home/hybrid/perl588/lib/site_perl/5.8.8 /home/hybrid/perl588/lib/site_perl .
/home/hybrid/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld
/home/hybrid/perl588/lib/5.8.8
/home/hybrid/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld
/home/hybrid/perl588/lib/site_perl/5.8.8 /home/hybrid/perl588/lib/site_perl) at
/home/hybrid/perl588/.cpanplus/5.8.8/build/Chart-Math-Axis-1.00/blib/lib/Chart/Math/Axis.pm
line 15.
# BEGIN failed--compilation aborted at t/01_compile.t line 15.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Looks like you failed 1 test of 2.
dubious
Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 2
Failed 1/2 tests, 50.00% okay
t/02_main........Can't locate Params/Util.pm in @INC (@INC contains:
/home/hybrid/perl588/.cpanplus/5.8.8/build/Chart-Math-Axis-1.00/blib/lib
/home/hybrid/perl588/.cpanplus/5.8.8/build/Chart-Math-Axis-1.00/blib/arch
/home/hybrid/perl588/.cpanplus/5.8.8/build/Clone-0.22/blib/lib
/home/hybrid/perl588/.cpanplus/5.8.8/build/Clone-0.22/blib/arch
/home/hybrid/perl588/.cpanplus/5.8.8/build/Clone-0.22/blib
/home/hybrid/perl588/.cpanplus/5.8.8/build/Chart-Math-Axis-1.00/blib
/home/hybrid/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld
/home/hybrid/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld
/home/hybrid/perl588/lib/5.8.8
/home/hybrid/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld
/home/hybrid/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld
/home/hybrid/perl588/lib/site_perl/5.8.8
/home/hybrid/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld
/home/hybrid/perl588/lib/site_perl/5.8.8 /home/hybrid/perl588/lib/site_perl .
/home/hybrid/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld
/home/hybrid/perl588/lib/5.8.8
/home/hybrid/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld
/home/hybrid/perl588/lib/site_perl/5.8.8 /home/hybrid/perl588/lib/site_perl) at
/home/hybrid/perl588/.cpanplus/5.8.8/build/Chart-Math-Axis-1.00/blib/lib/Chart/Math/Axis.pm
line 15.
BEGIN failed--compilation aborted at
/home/hybrid/perl588/.cpanplus/5.8.8/build/Chart-Math-Axis-1.00/blib/lib/Chart/Math/Axis.pm
line 15.
Compilation failed in require at t/02_main.t line 14.
BEGIN failed--compilation aborted at t/02_main.t line 14.
# Looks like your test died before it could output anything.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-165
Failed 165/165 tests, 0.00% okay
t/03_tainting....skipped
all skipped: Skipping taint tests (no Taint.pm)
t/99_author......skipped
all skipped: Test::Pod 1.00 required for testing POD
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/01_compile.t 1 256 2 1 2
t/02_main.t 255 65280 165 330 1-165
2 tests skipped.
Failed 2/4 test scripts. 166/167 subtests failed.
Files=4, Tests=167, 1 wallclock secs ( 1.50 cusr + 0.12 csys = 1.62 CPU)
Failed 2/4 test programs. 166/167 subtests failed.
make: *** [test_dynamic] Error 255
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Params::Util
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'ADAMK ([EMAIL PROTECTED])',
... # other information
PREREQ_PM => {
'Params::Util' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Clone 0.22
Math::BigFloat 1.51
Math::BigInt 1.77
Storable 2.15
Test::More 0.64
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.4.26, archname=i686-linux-thread-multi-64int-ld
uname='linux penguin 2.4.26 #1 smp thu jul 1 18:22:25 bst 2004 i686 unknown
unknown gnulinux '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='3.3.4', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='long double', nvsize=12,
Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.2.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.3.2'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
