This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear KYLESCH, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sun Nov 12 07:36:45 2006] Trying to get 'http://www.cpan.org/authors/id/K/KY/KYLESCH/AI-PSO-0.80.tar.gz' [MSG] [Sun Nov 12 07:36:47 2006] Trying to get 'http://www.cpan.org/authors/id/K/KY/KYLESCH/CHECKSUMS' [MSG] [Sun Nov 12 07:36:47 2006] Checksum matches for 'AI-PSO-0.80.tar.gz' [MSG] [Sun Nov 12 07:36:48 2006] Extracted 'AI-PSO-0.80/' [MSG] [Sun Nov 12 07:36:48 2006] Extracted 'AI-PSO-0.80/lib/' [MSG] [Sun Nov 12 07:36:48 2006] Extracted 'AI-PSO-0.80/lib/AI/' [MSG] [Sun Nov 12 07:36:48 2006] Extracted 'AI-PSO-0.80/lib/AI/PSO.pm' [MSG] [Sun Nov 12 07:36:48 2006] Extracted 'AI-PSO-0.80/t/' [MSG] [Sun Nov 12 07:36:48 2006] Extracted 'AI-PSO-0.80/t/PSO.t' [MSG] [Sun Nov 12 07:36:48 2006] Extracted 'AI-PSO-0.80/Changes' [MSG] [Sun Nov 12 07:36:48 2006] Extracted 'AI-PSO-0.80/MPL-1.1.txt' [MSG] [Sun Nov 12 07:36:48 2006] Extracted 'AI-PSO-0.80/README' [MSG] [Sun Nov 12 07:36:48 2006] Extracted 'AI-PSO-0.80/MANIFEST' [MSG] [Sun Nov 12 07:36:48 2006] Extracted 'AI-PSO-0.80/Makefile.PL' [MSG] [Sun Nov 12 07:36:48 2006] Extracted 'AI::PSO' to '/home/chris/.cpanplus/5.8.8/build/AI-PSO-0.80' [MSG] [Sun Nov 12 07:36:50 2006] Checking if your kit is complete... Looks good Writing Makefile for AI::PSO [MSG] [Sun Nov 12 07:36:50 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sun Nov 12 07:36:55 2006] cp lib/AI/PSO.pm blib/lib/AI/PSO.pm Manifying blib/man3/AI::PSO.3 [ERROR] [Sun Nov 12 07:36:57 2006] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/chris/dev/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/PSO.... # Failed test 'use AI::PSO;' # in t/PSO.t at line 2. # Tried to use 'AI::PSO'. # Error: Can't locate Math/Random.pm in @INC (@INC contains: /home/chris/.cpanplus/5.8.8/build/AI-PSO-0.80/blib/lib /home/chris/.cpanplus/5.8.8/build/AI-PSO-0.80/blib/arch /home/chris/.cpanplus/5.8.8/build/AI-PSO-0.80/blib /home/chris/dev/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int /home/chris/dev/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int /home/chris/dev/perl588/lib/5.8.8 /home/chris/dev/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/chris/dev/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/chris/dev/perl588/lib/site_perl/5.8.8 /home/chris/dev/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/chris/dev/perl588/lib/site_perl/5.8.8 /home/chris/dev/perl588/lib/site_perl . /home/chris/dev/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int /home/chris/dev/perl588/lib/5.8.8 /home/chris/dev/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/chris/dev/perl588/lib/site_perl/5.8.8 /home/chris/dev/perl588/li! b/site_perl .) at /home/chris/.cpanplus/5.8.8/build/AI-PSO-0.80/blib/lib/AI/PSO.pm line 6. # BEGIN failed--compilation aborted at t/PSO.t line 2. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Undefined subroutine &main::pso_set_params called at t/PSO.t line 40. # Looks like you planned 5 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-5 Failed 5/5 tests, 0.00% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/PSO.t 255 65280 5 9 1-5 Failed 1/1 test scripts. 5/5 subtests failed. Files=1, Tests=5, 1 wallclock secs ( 0.08 cusr + 0.03 csys = 0.11 CPU) Failed 1/1 test programs. 5/5 subtests failed. gmake: *** [test_dynamic] Error 255 MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Math::Random As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'KYLESCH ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Math::Random' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=netbsd, osvers=3.0, archname=i386-netbsd-thread-multi-64int uname='netbsd canker.bingosnet.co.uk 3.0 netbsd 3.0 (generic_laptop) #0: mon dec 19 01:08:52 utc 2005 [EMAIL PROTECTED]:homebuildsabnetbsd-3-0-releasei386200512182024z-objhomebuildsabnetbsd-3-0-releasesrcsysarchi386compilegeneric_laptop i386 ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include', optimize='-O', cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include' ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib' libpth=/usr/pkg/lib /lib /usr/lib libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E ' cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
