This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear SREZIC, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Wed Nov 29 09:30:04 2006] Trying to get 'http://www.cpan.org/authors/id/S/SR/SREZIC/Kwalify-1.09.tar.gz' [MSG] [Wed Nov 29 09:30:05 2006] Trying to get 'http://www.cpan.org/authors/id/S/SR/SREZIC/CHECKSUMS' [MSG] [Wed Nov 29 09:30:05 2006] Checksum matches for 'Kwalify-1.09.tar.gz' [MSG] [Wed Nov 29 09:30:06 2006] Extracted 'Kwalify-1.09' [MSG] [Wed Nov 29 09:30:06 2006] Extracted 'Kwalify-1.09/lib' [MSG] [Wed Nov 29 09:30:06 2006] Extracted 'Kwalify-1.09/t' [MSG] [Wed Nov 29 09:30:06 2006] Extracted 'Kwalify-1.09/Changes' [MSG] [Wed Nov 29 09:30:06 2006] Extracted 'Kwalify-1.09/MANIFEST' [MSG] [Wed Nov 29 09:30:06 2006] Extracted 'Kwalify-1.09/pkwalify' [MSG] [Wed Nov 29 09:30:06 2006] Extracted 'Kwalify-1.09/Makefile.PL' [MSG] [Wed Nov 29 09:30:06 2006] Extracted 'Kwalify-1.09/README' [MSG] [Wed Nov 29 09:30:06 2006] Extracted 'Kwalify-1.09/t/testdata' [MSG] [Wed Nov 29 09:30:06 2006] Extracted 'Kwalify-1.09/t/Kwalify.t' [MSG] [Wed Nov 29 09:30:06 2006] Extracted 'Kwalify-1.09/t/pkwalify.t' [MSG] [Wed Nov 29 09:30:06 2006] Extracted 'Kwalify-1.09/t/testdata/schema05.yaml' [MSG] [Wed Nov 29 09:30:06 2006] Extracted 'Kwalify-1.09/t/testdata/document05b.yaml' [MSG] [Wed Nov 29 09:30:06 2006] Extracted 'Kwalify-1.09/t/testdata/document05a.yaml' [MSG] [Wed Nov 29 09:30:06 2006] Extracted 'Kwalify-1.09/t/testdata/kwalify.yaml' [MSG] [Wed Nov 29 09:30:06 2006] Extracted 'Kwalify-1.09/lib/Schema' [MSG] [Wed Nov 29 09:30:06 2006] Extracted 'Kwalify-1.09/lib/Kwalify.pm' [MSG] [Wed Nov 29 09:30:06 2006] Extracted 'Kwalify-1.09/lib/Schema/Kwalify.pm' [MSG] [Wed Nov 29 09:30:06 2006] Extracted 'Kwalify' to '/home/hybrid/perl588/.cpanplus/5.8.8/build/Kwalify-1.09' [MSG] [Wed Nov 29 09:30:07 2006] Checking if your kit is complete... Looks good Writing Makefile for Kwalify [MSG] [Wed Nov 29 09:30:07 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Wed Nov 29 09:30:13 2006] cp lib/Kwalify.pm blib/lib/Kwalify.pm cp lib/Schema/Kwalify.pm blib/lib/Schema/Kwalify.pm cp pkwalify blib/script/pkwalify /home/hybrid/perl588/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/pkwalify Manifying blib/man1/pkwalify.1 Manifying blib/man3/Kwalify.3 Manifying blib/man3/Schema::Kwalify.3 [ERROR] [Wed Nov 29 09:30:15 2006] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/hybrid/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/Kwalify.....ok 36/40 skipped: various reasons t/pkwalify....# Looks like you planned 18 tests but only ran 6. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 7-18 Failed 12/18 tests, 33.33% okay (less 6 skipped tests: 0 okay, 0.00%) Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/pkwalify.t 255 65280 18 24 7-18 42 subtests skipped. Failed 1/2 test scripts. 12/58 subtests failed. Files=2, Tests=58, 1 wallclock secs ( 0.87 cusr + 0.11 csys = 0.98 CPU) Failed 1/2 test programs. 12/58 subtests failed. ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.4.26, archname=i686-linux-thread-multi-64int-ld uname='linux penguin 2.4.26 #1 smp thu jul 1 18:22:25 bst 2004 i686 unknown unknown gnulinux ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='3.3.4', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.2.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.2' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
