This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear SARTAK, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Fri Dec 15 23:32:42 2006] Trying to get 'http://www.cpan.org/authors/id/S/SA/SARTAK/Term-TtyRec-Plus-0.01.tar.gz' [MSG] [Fri Dec 15 23:32:43 2006] Trying to get 'http://www.cpan.org/authors/id/S/SA/SARTAK/CHECKSUMS' [MSG] [Fri Dec 15 23:32:43 2006] Checksum matches for 'Term-TtyRec-Plus-0.01.tar.gz' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/t/' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/t/malformed-header.ttyrec' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/t/malformed-data.ttyrec' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/t/02-parameters.t' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/t/nethack.ttyrec' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/t/simple.ttyrec' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/t/boilerplate.t' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/t/03-filter.t' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/t/00-load.t' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/t/pod-coverage.t' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/t/04-failure.t' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/t/pod.t' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/t/01-read.t' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/Changes' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/MANIFEST' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/lib/' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/lib/Term/' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/lib/Term/TtyRec/' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/lib/Term/TtyRec/Plus.pm' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/META.yml' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/README' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term-TtyRec-Plus-0.01/Makefile.PL' [MSG] [Fri Dec 15 23:32:44 2006] Extracted 'Term::TtyRec::Plus' to '/home/hybrid/perl588/.cpanplus/5.8.8/build/Term-TtyRec-Plus-0.01' [MSG] [Fri Dec 15 23:32:46 2006] Checking if your kit is complete... Looks good Writing Makefile for Term::TtyRec::Plus [MSG] [Fri Dec 15 23:32:46 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Dec 15 23:32:49 2006] cp lib/Term/TtyRec/Plus.pm blib/lib/Term/TtyRec/Plus.pm Manifying blib/man3/Term::TtyRec::Plus.3 [ERROR] [Fri Dec 15 23:32:55 2006] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/hybrid/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00-load..........# Testing Term::TtyRec::Plus 0.01, Perl 5.008008, /home/hybrid/perl588/bin/perl ok t/01-read.......... # Failed test 'Frame 3 orig_timestamp is correct' # at t/01-read.t line 14. # Failed test 'Frame 3 diffed_timestamp is correct' # at t/01-read.t line 14. # Failed test 'Frame 3 timestamp is correct' # at t/01-read.t line 14. # Failed test 'Frame 3 timestamp is correct (from t->prev_timestamp())' # at t/01-read.t line 14. # Failed test 'Frame 3 diff is correct' # at t/01-read.t line 14. # Failed test 'Frame 4 prev_timestamp is correct' # at t/01-read.t line 14. # Failed test 'Frame 4 diff is correct' # at t/01-read.t line 14. # Failed test 'Frame 5 orig_timestamp is correct' # at t/01-read.t line 14. # Failed test 'Frame 5 diffed_timestamp is correct' # at t/01-read.t line 14. # Failed test 'Frame 5 timestamp is correct' # at t/01-read.t line 14. # Failed test 'Frame 5 timestamp is correct (from t->prev_timestamp())' # at t/01-read.t line 14. # Failed test 'Frame 5 diff is correct' # at t/01-read.t line 14. # Looks like you failed 12 tests of 66. dubious Test returned status 12 (wstat 3072, 0xc00) DIED. FAILED tests 36-39, 41, 51-52, 58-61, 63 Failed 12/66 tests, 81.82% okay t/02-parameters.... # Failed test 'time_threshold works with diffs' # at t/02-parameters.t line 32. # got: '35.6013930331682786' # expected: '35.601359128952' # Failed test 'time_threshold works with timestamp - prev_timestamp' # at t/02-parameters.t line 33. # got: '35.6013930331682786' # expected: '35.601359128952' # Failed test 'filehandle argument works well enough' # at t/02-parameters.t line 45. # got: '434.991697999997996' # expected: '434.991698026657' # Failed test 'filehandle takes precedence over infile' # at t/02-parameters.t line 58. # got: '434.991697999997996' # expected: '434.991698026657' # Looks like you failed 4 tests of 4. dubious Test returned status 4 (wstat 1024, 0x400) DIED. FAILED tests 1-4 Failed 4/4 tests, 0.00% okay t/03-filter........ok t/04-failure.......ok t/boilerplate......ok t/pod-coverage.....skipped all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage t/pod..............skipped all skipped: Test::Pod 1.14 required for testing POD Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/01-read.t 12 3072 66 12 36-39 41 51-52 58-61 63 t/02-parameters.t 4 1024 4 4 1-4 2 tests skipped. Failed 2/8 test scripts. 16/91 subtests failed. Files=8, Tests=91, 5 wallclock secs ( 5.60 cusr + 0.11 csys = 5.71 CPU) Failed 2/8 test programs. 16/91 subtests failed. PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Test::More 0.65 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.4.26, archname=i686-linux-thread-multi-64int-ld uname='linux penguin 2.4.26 #1 smp thu jul 1 18:22:25 bst 2004 i686 unknown unknown gnulinux ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='3.3.4', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.2.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.2' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
