This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear MLEHMANN, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Wed Dec 27 13:22:33 2006] Trying to get 'http://www.cpan.org/authors/id/M/ML/MLEHMANN/IO-AIO-2.21.tar.gz' [MSG] [Wed Dec 27 13:22:48 2006] Trying to get 'http://www.cpan.org/authors/id/M/ML/MLEHMANN/CHECKSUMS' [MSG] [Wed Dec 27 13:22:54 2006] Checksum matches for 'IO-AIO-2.21.tar.gz' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/t/' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/t/06_group.t' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/t/07_feeder.t' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/t/02_read.t' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/t/04_fork.t' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/t/05_readdir.t' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/t/03_errors.t' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/t/01_stat.t' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/t/aio_test_common.pm' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/t/00_load.t' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/genac' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/README' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/autoconf/' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/autoconf/configure' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/autoconf/configure.ac' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/autoconf/config.h.in' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/Changes' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/Makefile.PL' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/META.yml' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/typemap' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/autoconf.pm' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/COPYING' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/AIO.pm' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/AIO.xs' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO-AIO-2.21/MANIFEST' [MSG] [Wed Dec 27 13:22:56 2006] Extracted 'IO::AIO' to '/export/home/cwill1is/perl588/.cpanplus/5.8.8/build/IO-AIO-2.21' [MSG] [Wed Dec 27 13:23:32 2006] checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for readahead... no checking for fdatasync... no checking for pread and pwrite... yes checking for readdir_r... yes checking for sendfile... no configure: creating ./config.status config.status: creating config.h Checking if your kit is complete... Looks good Writing Makefile for IO::AIO [MSG] [Wed Dec 27 13:23:32 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Wed Dec 27 13:23:44 2006] cp autoconf.pm blib/lib/IO/autoconf.pm cp AIO.pm blib/lib/IO/AIO.pm /export/home/cwill1is/perl588/bin/perl /export/home/cwill1is/perl588/lib/5.8.8/ExtUtils/xsubpp -typemap /export/home/cwill1is/perl588/lib/5.8.8/ExtUtils/typemap -typemap typemap AIO.xs > AIO.xsc && mv AIO.xsc AIO.c gcc -c -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O -DVERSION=\"2.21\" -DXS_VERSION=\"2.21\" -fPIC "-I/export/home/cwill1is/perl588/lib/5.8.8/sun4-solaris-64int/CORE" AIO.c Running Mkbootstrap for IO::AIO () chmod 644 AIO.bs rm -f blib/arch/auto/IO/AIO/AIO.so LD_RUN_PATH="/usr/lib" gcc -G -L/usr/local/lib AIO.o -o blib/arch/auto/IO/AIO/AIO.so \ -lpthread -lrt \ chmod 755 blib/arch/auto/IO/AIO/AIO.so cp AIO.bs blib/arch/auto/IO/AIO/AIO.bs chmod 644 blib/arch/auto/IO/AIO/AIO.bs Manifying blib/man3/IO::AIO.3 [ERROR] [Wed Dec 27 13:24:27 2006] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /export/home/cwill1is/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_load.......ok t/01_stat.......ok t/02_read.......ok t/03_errors.....ok t/04_fork.......ok t/05_readdir....dubious Test returned status 0 (wstat 139, 0x8b) DIED. FAILED tests 2-8 Failed 7/8 tests, 12.50% okay t/06_group......ok t/07_feeder.....ok Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/05_readdir.t 0 139 8 14 2-8 Failed 1/8 test scripts. 7/63 subtests failed. Files=8, Tests=63, 42 wallclock secs (21.10 cusr + 15.71 csys = 36.81 CPU) Failed 1/8 test programs. 7/63 subtests failed. make: *** [test_dynamic] Error 29 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=solaris, osvers=2.7, archname=sun4-solaris-64int uname='sunos scc063 5.7 generic_106541-16 sun4u sparc sunw,ultra-60 ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O', cppflags='-fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='2.95.3 20010315 (release)', gccosandvers='solaris2.7' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib ' libpth=/usr/local/lib /usr/lib /usr/ccs/lib libs=-lsocket -lnsl -lgdbm -ldl -lm -lc perllibs=-lsocket -lnsl -ldl -lm -lc libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
