This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear DAMI, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Thu Dec 28 15:33:34 2006] Trying to get 'http://www.cpan.org/authors/id/D/DA/DAMI/Data-Domain-0.02.tar.gz' [MSG] [Thu Dec 28 15:33:35 2006] Trying to get 'http://www.cpan.org/authors/id/D/DA/DAMI/CHECKSUMS' [MSG] [Thu Dec 28 15:33:36 2006] Checksum matches for 'Data-Domain-0.02.tar.gz' [MSG] [Thu Dec 28 15:33:36 2006] Extracted 'Data-Domain-0.02/' [MSG] [Thu Dec 28 15:33:36 2006] Extracted 'Data-Domain-0.02/Build.pl' [MSG] [Thu Dec 28 15:33:36 2006] Extracted 'Data-Domain-0.02/Changes' [MSG] [Thu Dec 28 15:33:36 2006] Extracted 'Data-Domain-0.02/lib/' [MSG] [Thu Dec 28 15:33:36 2006] Extracted 'Data-Domain-0.02/lib/Data/' [MSG] [Thu Dec 28 15:33:36 2006] Extracted 'Data-Domain-0.02/lib/Data/Domain.pm' [MSG] [Thu Dec 28 15:33:36 2006] Extracted 'Data-Domain-0.02/MANIFEST' [MSG] [Thu Dec 28 15:33:36 2006] Extracted 'Data-Domain-0.02/META.yml' [MSG] [Thu Dec 28 15:33:36 2006] Extracted 'Data-Domain-0.02/README' [MSG] [Thu Dec 28 15:33:36 2006] Extracted 'Data-Domain-0.02/t/' [MSG] [Thu Dec 28 15:33:36 2006] Extracted 'Data-Domain-0.02/t/data-domain.t' [MSG] [Thu Dec 28 15:33:36 2006] Extracted 'Data-Domain-0.02/t/pod-coverage.t' [MSG] [Thu Dec 28 15:33:36 2006] Extracted 'Data-Domain-0.02/t/pod.t' [MSG] [Thu Dec 28 15:33:36 2006] Extracted 'Data::Domain' to '/home/chris/.cpanplus/5.8.8/build/Data-Domain-0.02' [ERROR] [Thu Dec 28 15:33:36 2006] Unable to find 'Build.PL' or 'Makefile.PL' for 'Data::Domain'; Will default to 'CPANPLUS::Dist::MM' but might be unable to install! [MSG] [Thu Dec 28 15:33:36 2006] No 'Makefile.PL' found - attempting to generate one [MSG] [Thu Dec 28 15:33:37 2006] Checking if your kit is complete... Looks good Writing Makefile for Data::Domain [MSG] [Thu Dec 28 15:33:37 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Dec 28 15:33:40 2006] cp lib/Data/Domain.pm blib/lib/Data/Domain.pm cp Build.pl blib/lib/Data/Build.pl Manifying blib/man3/Data::Domain.3 [ERROR] [Thu Dec 28 15:33:41 2006] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/data-domain.....# Testing Data::Domain 0.02, Perl 5.008008, /home/chris/perl588/bin/perl Can't locate Date/Calc.pm in @INC (@INC contains: /home/chris/.cpanplus/5.8.8/build/Data-Domain-0.02/blib/lib /home/chris/.cpanplus/5.8.8/build/Data-Domain-0.02/blib/arch /home/chris/.cpanplus/5.8.8/build/Data-Domain-0.02/blib /home/chris/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int /home/chris/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int /home/chris/perl588/lib/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/chris/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl . /home/chris/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int /home/chris/perl588/lib/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl .) at /home/chris/perl588/lib/5.8.8/autouse.pm line 53. # Looks like you planned 123 tests but only ran 41. # Looks like your test died just after 41. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 42-123 Failed 82/123 tests, 33.33% okay t/pod-coverage....skipped all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage t/pod.............skipped all skipped: Test::Pod 1.14 required for testing POD Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/data-domain.t 255 65280 123 164 42-123 2 tests skipped. Failed 1/3 test scripts. 82/123 subtests failed. Files=3, Tests=123, 1 wallclock secs ( 0.48 cusr + 0.15 csys = 0.63 CPU) *** Error code 25 Stop. make: stopped in /home/chris/.cpanplus/5.8.8/build/Data-Domain-0.02 Failed 1/3 test programs. 82/123 subtests failed. MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Date::Calc As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'DAMI ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Date::Calc' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /home/chris/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin PERL5LIB = :/home/chris/.cpanplus/5.8.8/build/Data-Domain-0.02/blib/lib:/home/chris/.cpanplus/5.8.8/build/Data-Domain-0.02/blib/arch:/home/chris/.cpanplus/5.8.8/build/Data-Domain-0.02/blib PERL5_CPANPLUS_IS_RUNNING = 11883 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/sh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/chris/perl588/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 0 100 0 EGID: $) = 0 100 0 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int uname='netbsd nepta.bingosnet.co.uk 3.1 netbsd 3.1 (generic) #0: tue oct 31 04:27:07 utc 2006 [EMAIL PROTECTED]:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric i386 ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include', optimize='-O', cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include' ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib' libpth=/usr/pkg/lib /lib /usr/lib libs=-lm -lcrypt -lutil -lc -lposix -lpthread perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-R/home/chris/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int/CORE' cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
