This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear DSB, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Thu Dec 28 15:46:12 2006] Trying to get 'http://www.cpan.org/authors/id/D/DS/DSB/ClearCase-Argv-1.24.tar.gz' [MSG] [Thu Dec 28 15:46:13 2006] Trying to get 'http://www.cpan.org/authors/id/D/DS/DSB/CHECKSUMS' [MSG] [Thu Dec 28 15:46:14 2006] Checksum matches for 'ClearCase-Argv-1.24.tar.gz' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/ctcmd/' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/ctcmd/ccargv2.pl' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/ctcmd/ccargv1.pl' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/ctcmd/oo2.pl' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/ctcmd/ccargv3.pl' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/ctcmd/README' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/ctcmd/func1.pl' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/ctcmd/func2.pl' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/ctcmd/oo1.pl' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/ctcmd/ccargv4.pl' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/envp' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/simplest' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/tarvob' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/mkattr' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/setview' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/functional' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/bench/' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/bench/read-bm.pl' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/bench/README' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/bench/write-bm.pl' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/bmccug' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/fix_eltype' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/README' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/CCreport' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/examples/simple' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/Argv.pm' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/Changes' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/MANIFEST' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/README.html' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/test.pl' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/Makefile.PL' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase-Argv-1.24/README' [MSG] [Thu Dec 28 15:46:14 2006] Extracted 'ClearCase::Argv' to '/home/chris/.cpanplus/5.8.8/build/ClearCase-Argv-1.24' [MSG] [Thu Dec 28 15:46:15 2006] Checking if your kit is complete... Looks good Warning: prerequisite Argv 1.19 not found. Writing Makefile for ClearCase::Argv [MSG] [Thu Dec 28 15:46:15 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Dec 28 15:46:18 2006] cp Argv.pm blib/lib/ClearCase/Argv.pm Manifying blib/man3/ClearCase::Argv.3 [ERROR] [Thu Dec 28 15:46:18 2006] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl Argv defines neither package nor VERSION--version check failed at Argv.pm line 5. BEGIN failed--compilation aborted at Argv.pm line 5. Compilation failed in require at blib/lib/ClearCase/Argv.pm line 5. BEGIN failed--compilation aborted at blib/lib/ClearCase/Argv.pm line 5. Compilation failed in require at test.pl line 20. BEGIN failed--compilation aborted at test.pl line 20. 1..0 *** Error code 255 Stop. make: stopped in /home/chris/.cpanplus/5.8.8/build/ClearCase-Argv-1.24 PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Argv 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /home/chris/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin PERL5LIB = :/home/chris/.cpanplus/5.8.8/build/ClearCase-Argv-1.24/blib/lib:/home/chris/.cpanplus/5.8.8/build/ClearCase-Argv-1.24/blib/arch:/home/chris/.cpanplus/5.8.8/build/ClearCase-Argv-1.24/blib PERL5_CPANPLUS_IS_RUNNING = 5676 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/sh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/chris/perl588/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 0 100 0 EGID: $) = 0 100 0 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int uname='netbsd nepta.bingosnet.co.uk 3.1 netbsd 3.1 (generic) #0: tue oct 31 04:27:07 utc 2006 [EMAIL PROTECTED]:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric i386 ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include', optimize='-O', cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include' ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib' libpth=/usr/pkg/lib /lib /usr/lib libs=-lm -lcrypt -lutil -lc -lposix -lpthread perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-R/home/chris/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int/CORE' cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
