This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear HASSEILY, This is a computer-generated error report created automatically by CPANPLUS, version 0.074. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Wed Jan 10 21:07:52 2007] Trying to get 'http://www.cpan.org/authors/id/H/HA/HASSEILY/DBIx-HA-0.99.tar.gz' [MSG] [Wed Jan 10 21:07:54 2007] Trying to get 'http://www.cpan.org/authors/id/H/HA/HASSEILY/CHECKSUMS' [MSG] [Wed Jan 10 21:07:55 2007] Checksum matches for 'DBIx-HA-0.99.tar.gz' [MSG] [Wed Jan 10 21:07:55 2007] Extracted 'DBIx-HA-0.99/' [MSG] [Wed Jan 10 21:07:55 2007] Extracted 'DBIx-HA-0.99/Changes' [MSG] [Wed Jan 10 21:07:55 2007] Extracted 'DBIx-HA-0.99/lib/' [MSG] [Wed Jan 10 21:07:55 2007] Extracted 'DBIx-HA-0.99/lib/DBIx/' [MSG] [Wed Jan 10 21:07:55 2007] Extracted 'DBIx-HA-0.99/lib/DBIx/HA.pm' [MSG] [Wed Jan 10 21:07:55 2007] Extracted 'DBIx-HA-0.99/Makefile.PL' [MSG] [Wed Jan 10 21:07:55 2007] Extracted 'DBIx-HA-0.99/MANIFEST' [MSG] [Wed Jan 10 21:07:55 2007] Extracted 'DBIx-HA-0.99/META.yml' [MSG] [Wed Jan 10 21:07:55 2007] Extracted 'DBIx-HA-0.99/README' [MSG] [Wed Jan 10 21:07:55 2007] Extracted 'DBIx-HA-0.99/t/' [MSG] [Wed Jan 10 21:07:55 2007] Extracted 'DBIx-HA-0.99/t/base.t' [MSG] [Wed Jan 10 21:07:55 2007] Extracted 'DBIx-HA-0.99/t/failover.t' [MSG] [Wed Jan 10 21:07:55 2007] Extracted 'DBIx::HA' to '/opt/perl/testers/.cpanplus/5.8.8/build/DBIx-HA-0.99' [MSG] [Wed Jan 10 21:07:55 2007] Checking if your kit is complete... Looks good Writing Makefile for DBIx::HA [MSG] [Wed Jan 10 21:07:55 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Wed Jan 10 21:07:55 2007] Module 'DBIx::HA' requires 'DBI' version '1.49' to be installed [MSG] [Wed Jan 10 21:08:06 2007] *** You are using a perl configured with threading enabled. *** You should be aware that using multiple threads is *** not recommended for production environments. *** Note: The optional PlRPC-modules (RPC::PlServer etc) are not installed. If you want to use the DBD::Proxy driver and DBI::ProxyServer modules, then you'll need to install the RPC::PlServer, RPC::PlClient, Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you. You can install them any time after installing the DBI. You do *not* need these modules for typical DBI usage. Optional modules are available from any CPAN mirror, in particular http://search.cpan.org/ http://www.perl.com/CPAN/modules/by-module http://www.perl.org/CPAN/modules/by-module ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module Your perl was compiled with gcc (version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)), okay. Creating DBI::PurePerl test variant: t/zvpp_01basics.t Creating DBI::PurePerl test variant: t/zvpp_02dbidrv.t Creating DBI::PurePerl test variant: t/zvpp_03handle.t Creating DBI::PurePerl test variant: t/zvpp_04mods.t Creating DBI::PurePerl test variant: t/zvpp_05thrclone.t (use threads) Creating DBI::PurePerl test variant: t/zvpp_06attrs.t Creating DBI::PurePerl test variant: t/zvpp_07kids.t Creating DBI::PurePerl test variant: t/zvpp_08keeperr.t Creating DBI::PurePerl test variant: t/zvpp_09trace.t Creating DBI::PurePerl test variant: t/zvpp_10examp.t Creating DBI::PurePerl test variant: t/zvpp_11fetch.t Creating DBI::PurePerl test variant: t/zvpp_14utf8.t Creating DBI::PurePerl test variant: t/zvpp_15array.t Creating DBI::PurePerl test variant: t/zvpp_20meta.t Creating DBI::PurePerl test variant: t/zvpp_30subclass.t Creating DBI::PurePerl test variant: t/zvpp_40profile.t Creating DBI::PurePerl test variant: t/zvpp_41prof_dump.t Creating DBI::PurePerl test variant: t/zvpp_42prof_data.t Creating DBI::PurePerl test variant: t/zvpp_43prof_env.t Creating DBI::PurePerl test variant: t/zvpp_50dbm.t Creating DBI::PurePerl test variant: t/zvpp_60preparse.t Creating DBI::PurePerl test variant: t/zvpp_70callbacks.t Creating DBI::PurePerl test variant: t/zvpp_72childhandles.t Creating DBI::PurePerl test variant: t/zvpp_80proxy.t I see you're using perl 5.008008 on x86_64-linux-thread-multi-ld, okay. Remember to actually *read* the README file! Use 'make' to build the software (dmake or nmake on Windows). Then 'make test' to execute self tests. Then 'make install' to install the DBI and then delete this working directory before unpacking and building any DBD::* drivers. Writing Makefile for DBI [MSG] [Wed Jan 10 21:08:15 2007] Running Mkbootstrap for DBI () Manifying blib/man1/dbiprof.1 Manifying blib/man1/dbiproxy.1 Manifying blib/man3/DBI::FAQ.3 Manifying blib/man3/DBI::SQL::Nano.3 Manifying blib/man3/DBD::Proxy.3 Manifying blib/man3/DBI::Const::GetInfo::ANSI.3 Manifying blib/man3/DBD::DBM.3 Manifying blib/man3/DBI::Const::GetInfoReturn.3 Manifying blib/man3/DBI.3 Manifying blib/man3/DBD::Sponge.3 Manifying blib/man3/DBI::Const::GetInfoType.3 Manifying blib/man3/Roadmap.3 Manifying blib/man3/DBI::DBD::Metadata.3 Manifying blib/man3/DBI::W32ODBC.3 Manifying blib/man3/DBI::Const::GetInfo::ODBC.3 Manifying blib/man3/DBI::ProfileDumper::Apache.3 Manifying blib/man3/Bundle::DBI.3 Manifying blib/man3/TASKS.3 Manifying blib/man3/DBI::Profile.3 Manifying blib/man3/DBD::File.3 Manifying blib/man3/DBI::ProfileDumper.3 Manifying blib/man3/DBI::ProxyServer.3 Manifying blib/man3/DBI::ProfileSubs.3 Manifying blib/man3/DBI::DBD.3 Manifying blib/man3/Win32::DBIODBC.3 Manifying blib/man3/DBI::PurePerl.3 Manifying blib/man3/DBI::ProfileData.3 [MSG] [Wed Jan 10 21:08:31 2007] MAKE TEST passed: t/01basics...............ok 4/131 skipped: developer tests t/02dbidrv...............ok t/03handle...............ok t/04mods.................ok t/05thrclone.............ok t/06attrs................ok t/07kids.................ok t/08keeperr..............ok t/09trace................ok t/10examp................ok t/11fetch................ok t/14utf8.................ok t/15array................ok t/20meta.................ok t/30subclass.............ok t/40profile..............ok t/41prof_dump............ok t/42prof_data............ok t/43prof_env.............ok t/50dbm..................ok t/60preparse.............ok t/70callbacks............ok t/72childhandles.........ok t/80proxy................skipped all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm) t/pod....................ok t/zvpp_01basics..........ok 4/131 skipped: developer tests t/zvpp_02dbidrv..........ok 10/51 skipped: various reasons t/zvpp_03handle..........ok 76/137 skipped: various reasons t/zvpp_04mods............ok t/zvpp_05thrclone........ok t/zvpp_06attrs...........ok 7/137 skipped: various reasons t/zvpp_07kids............skipped all skipped: $h->{Kids} attribute not supported for DBI::PurePerl t/zvpp_08keeperr.........ok t/zvpp_09trace...........ok t/zvpp_10examp...........ok 39/263 skipped: various reasons t/zvpp_11fetch...........ok t/zvpp_14utf8............ok t/zvpp_15array...........ok t/zvpp_20meta............ok t/zvpp_30subclass........ok t/zvpp_40profile.........skipped all skipped: profiling not supported for DBI::PurePerl t/zvpp_41prof_dump.......skipped all skipped: profiling not supported for DBI::PurePerl t/zvpp_42prof_data.......skipped all skipped: profiling not supported for DBI::PurePerl t/zvpp_43prof_env........skipped all skipped: profiling not supported for DBI::PurePerl t/zvpp_50dbm.............ok t/zvpp_60preparse........skipped all skipped: preparse not supported for DBI::PurePerl t/zvpp_70callbacks.......skipped all skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl t/zvpp_72childhandles....ok t/zvpp_80proxy...........skipped all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm) All tests successful, 9 tests and 140 subtests skipped. Files=49, Tests=2370, 15 wallclock secs (12.47 cusr + 1.50 csys = 13.97 CPU) test.pl DBI test application $Revision: 11.7 $ Switch: DBI 1.53 by Tim Bunce, 1.53 Available Drivers: DBM, ExampleP, File, Proxy, Sponge dbi:ExampleP:: testing 5 sets of 20 connections: Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Made 100 connections in 0 wallclock secs ( 0.01 usr + 0.00 sys = 0.01 CPU) Testing handle creation speed... 11904 NullP sth/s perl 5.008008 x86_64-linux-thread-multi-ld (gcc 3.4.4 -g -O3) test.pl done [MSG] [Wed Jan 10 21:08:31 2007] Ok, not sending test report [MSG] [Wed Jan 10 21:08:32 2007] cp lib/DBIx/HA.pm blib/lib/DBIx/HA.pm Manifying blib/man3/DBIx::HA.3 [ERROR] [Wed Jan 10 21:08:33 2007] MAKE TEST failed: [EMAIL PROTECTED] t/base........ # Failed test 'require DBIx::HA;' # in t/base.t at line 14. # Tried to require 'DBIx::HA'. # Error: Can't locate Sys/SigAction.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/DBIx-HA-0.99/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/DBIx-HA-0.99/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/Perl6-Junction-1.20_01/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Perl6-Junction-1.20_01/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Perl6-Junction-1.20_01/blib /opt/perl/testers/.cpanplus/5.8.8/build/PBS-Logs-0.02/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/PBS-Logs-0.02/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/PBS-Logs-0.02/blib /opt/perl/testers/.cpanplus/5.8.8/build/Carp-Clan-5.8/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Carp-Clan-5.8/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Carp-Clan-5.8/blib /opt/perl/testers/.cpanplus/5.8.8/build/Algorithm-C3-0.06/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Algorithm-C3-0.06/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Algorithm-C3-! 0.06/blib /opt/perl/testers/.cpanplus/5.8.8/build/Sub-Uplevel-0.14/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Sub-Uplevel-0.14/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Sub-Uplevel-0.14/blib /opt/perl/testers/.cpanplus/5.8.8/build/Test-Exception-0.24/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Test-Exception-0.24/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Test-Exception-0.24/blib /opt/perl/testers/.cpanplus/5.8.8/build/Class-C3-0.14/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Class-C3-0.14/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Class-C3-0.14/blib /opt/perl/testers/.cpanplus/5.8.8/build/Class-Data-Accessor-0.03/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Class-Data-Accessor-0.03/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Class-Data-Accessor-0.03/blib /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.53/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.53/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.53/blib /op! t/perl/testers/.cpanplus/5.8.8/build/DBIx-HA-0.99/blib /opt/pe! rl/teste rs/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl . /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .) at /opt/perl/testers/.cpanplus/5.8.8/build/DBIx-HA-0.99/blib/lib/DBIx/HA.pm line 15. # BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/DBIx-HA-0.99/blib/lib/DBIx/HA.pm line 15. # Compilation failed in require at (eval 3) line 2. Can't locate object method "initialize" via package "DBIx::HA" at t/base.t line 46. # Looks like you planned 7 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-7 Failed 7/7 tests, 0.00% okay t/failover.... # Failed test 'require DBIx::HA;' # in t/failover.t at line 14. # Tried to require 'DBIx::HA'. # Error: Can't locate Sys/SigAction.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/DBIx-HA-0.99/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/DBIx-HA-0.99/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/Perl6-Junction-1.20_01/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Perl6-Junction-1.20_01/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Perl6-Junction-1.20_01/blib /opt/perl/testers/.cpanplus/5.8.8/build/PBS-Logs-0.02/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/PBS-Logs-0.02/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/PBS-Logs-0.02/blib /opt/perl/testers/.cpanplus/5.8.8/build/Carp-Clan-5.8/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Carp-Clan-5.8/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Carp-Clan-5.8/blib /opt/perl/testers/.cpanplus/5.8.8/build/Algorithm-C3-0.06/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Algorithm-C3-0.06/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Algorithm-C3-! 0.06/blib /opt/perl/testers/.cpanplus/5.8.8/build/Sub-Uplevel-0.14/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Sub-Uplevel-0.14/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Sub-Uplevel-0.14/blib /opt/perl/testers/.cpanplus/5.8.8/build/Test-Exception-0.24/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Test-Exception-0.24/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Test-Exception-0.24/blib /opt/perl/testers/.cpanplus/5.8.8/build/Class-C3-0.14/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Class-C3-0.14/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Class-C3-0.14/blib /opt/perl/testers/.cpanplus/5.8.8/build/Class-Data-Accessor-0.03/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Class-Data-Accessor-0.03/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Class-Data-Accessor-0.03/blib /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.53/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.53/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.53/blib /op! t/perl/testers/.cpanplus/5.8.8/build/DBIx-HA-0.99/blib /opt/pe! rl/teste rs/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl . /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .) at /opt/perl/testers/.cpanplus/5.8.8/build/DBIx-HA-0.99/blib/lib/DBIx/HA.pm line 15. # BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/DBIx-HA-0.99/blib/lib/DBIx/HA.pm line 15. # Compilation failed in require at (eval 3) line 2. Can't locate object method "initialize" via package "DBIx::HA" at t/failover.t line 46. # Looks like you planned 7 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-7 Failed 7/7 tests, 0.00% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/base.t 255 65280 7 13 1-7 t/failover.t 255 65280 7 13 1-7 Failed 2/2 test scripts. 14/14 subtests failed. Files=2, Tests=14, 1 wallclock secs ( 0.22 cusr + 0.07 csys = 0.29 CPU) Failed 2/2 test programs. 14/14 subtests failed. make: *** [test_dynamic] Error 255 MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Sys::SigAction As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'HASSEILY ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Sys::SigAction' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: DBI 1.53 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.16.14, archname=x86_64-linux-thread-multi-ld uname='linux rinse 2.6.16.14 #1 smp mon may 8 23:44:32 cst 2006 x86_64 gnulinux ' config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true [EMAIL PROTECTED]' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g -O3', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.4 20050314 (prerelease) (Debian 3.4.3-13)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8 alignbytes=16, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.2.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.2' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE' cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
