This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear ERWAN, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Fri Jan 12 11:01:17 2007] Trying to get 'http://www.cpan.org/authors/id/E/ER/ERWAN/Math-Polynom-0.04.tar.gz' [MSG] [Fri Jan 12 11:01:18 2007] Trying to get 'http://www.cpan.org/authors/id/E/ER/ERWAN/CHECKSUMS' [MSG] [Fri Jan 12 11:01:19 2007] Checksum matches for 'Math-Polynom-0.04.tar.gz' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/t/' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/t/01_test_compile.t' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/t/05_test_negate.t' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/t/08_test_minus.t' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/t/12_test_newton_raphson.t' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/t/07_test_add.t' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/t/04_test_clone.t' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/t/03_test_stringify.t' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/t/06_test_eval.t' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/t/09_test_multiply.t' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/t/pod-coverage.t' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/t/13_test_error_codes.t' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/t/02_test_new.t' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/t/pod.t' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/t/15_test_brent.t' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/t/10_test_divide.t' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/t/14_test_secant.t' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/t/11_test_derivate.t' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/Changes' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/MANIFEST' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/META.yml' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/lib/' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/lib/Math/' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/lib/Math/Polynom.pm' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/README' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math-Polynom-0.04/Makefile.PL' [MSG] [Fri Jan 12 11:01:19 2007] Extracted 'Math::Polynom' to '/home/chris/.cpanplus/5.8.8/build/Math-Polynom-0.04' [MSG] [Fri Jan 12 11:01:21 2007] Checking if your kit is complete... Looks good Warning: prerequisite accessors 0 not found. Writing Makefile for Math::Polynom [MSG] [Fri Jan 12 11:01:21 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Jan 12 11:01:21 2007] Module 'Math::Polynom' requires 'accessors' version '0' to be installed [MSG] [Fri Jan 12 11:01:21 2007] Trying to get 'http://www.cpan.org/authors/id/S/SP/SPURKIS/accessors-0.02.tar.gz' [MSG] [Fri Jan 12 11:01:21 2007] Trying to get 'http://www.cpan.org/authors/id/S/SP/SPURKIS/CHECKSUMS' [MSG] [Fri Jan 12 11:01:22 2007] Checksum matches for 'accessors-0.02.tar.gz' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/Build.PL' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/Changes' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/INSTALL' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/lib' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/lib/accessors' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/lib/accessors/chained.pm' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/lib/accessors/classic.pm' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/lib/accessors.pm' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/Makefile.PL' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/MANIFEST' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/MANIFEST.SKIP' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/META.yml' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/README' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/t' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/t/01__basic.t' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/t/02__chaining.t' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/t/03__classic.t' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/t/04__invalid.t' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/t/05__default.t' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/t/Benchmark.pm' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors-0.02/TODO' [MSG] [Fri Jan 12 11:01:22 2007] Extracted 'accessors' to '/home/chris/.cpanplus/5.8.8/build/accessors-0.02' [MSG] [Fri Jan 12 11:01:24 2007] # running Build.PL /usr/bin/perl Build.PL Checking whether your kit is complete... Looks good Checking prerequisites... Looks good Creating new 'Build' script for 'accessors' version '0.02' Unknown 'build_class', defaulting to 'Module::Build' [MSG] [Fri Jan 12 11:01:24 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Jan 12 11:01:26 2007] /usr/bin/perl Build --makefile_env_macros 1 Copying lib/accessors/classic.pm -> blib/lib/accessors/classic.pm Copying lib/accessors/chained.pm -> blib/lib/accessors/chained.pm Copying lib/accessors.pm -> blib/lib/accessors.pm Manifying blib/lib/accessors/chained.pm -> blib/libdoc/accessors::chained.3p Manifying blib/lib/accessors/classic.pm -> blib/libdoc/accessors::classic.3p Manifying blib/lib/accessors.pm -> blib/libdoc/accessors.3p [MSG] [Fri Jan 12 11:01:57 2007] MAKE TEST passed: /usr/bin/perl Build --makefile_env_macros 1 test t/01__basic.......ok t/02__chaining....ok t/03__classic.....ok t/04__invalid.....ok t/05__default.....ok All tests successful. Files=5, Tests=36, 30 wallclock secs (18.05 cusr + 11.90 csys = 29.95 CPU) [MSG] [Fri Jan 12 11:02:10 2007] Successfully sent 'pass' report for 'accessors-0.02' [MSG] [Fri Jan 12 11:02:12 2007] cp lib/Math/Polynom.pm blib/lib/Math/Polynom.pm Manifying blib/man3/Math::Polynom.3p [ERROR] [Fri Jan 12 11:02:15 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/01_test_compile...........ok t/02_test_new...............ok t/03_test_stringify.........ok t/04_test_clone.............ok t/05_test_negate............ok t/06_test_eval.............. # Failed test 'eval(-5) on [3*x^2 + 5.2*x^0.5]' # at t/06_test_eval.t line 20. # got: 'NaN' # expected: 'nan' # Looks like you failed 1 test of 54. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 29 Failed 1/54 tests, 98.15% okay t/07_test_add...............ok t/08_test_minus.............ok t/09_test_multiply..........ok t/10_test_divide............ok t/11_test_derivate..........ok t/12_test_newton_raphson.... # Failed test '5*x^5 + 4*x^3.2 + -2*x^0.9 ->newton_raphson(guess => -10, precision => 1e-15) = 0.6161718040343 (got NaN)' # at t/12_test_newton_raphson.t line 26. # Failed test 'newton_raphson() fails on $p2 with negative guess' # at t/12_test_newton_raphson.t line 43. Use of uninitialized value in pattern match (m//) at t/12_test_newton_raphson.t line 44. # Failed test '$p2->error_message looks good' # at t/12_test_newton_raphson.t line 44. # Failed test '$p2->error looks good' # at t/12_test_newton_raphson.t line 45. # got: '0' # expected: '1' # Looks like you planned 26 tests but ran 1 extra. # Looks like you failed 4 tests of 27 run. dubious Test returned status 4 (wstat 1024, 0x400) DIED. FAILED tests 10-13, 27 Failed 5/26 tests, 80.77% okay t/13_test_error_codes.......ok t/14_test_secant............ # Failed test 'secant() fails on polynom 2*x^0.2 - 1' # at t/14_test_secant.t line 74. Use of uninitialized value in pattern match (m//) at t/14_test_secant.t line 75. # Failed test '$p5->error_message looks good' # at t/14_test_secant.t line 75. # Failed test '$p5->error looks good' # at t/14_test_secant.t line 76. # got: '0' # expected: '1' # Looks like you failed 3 tests of 34. dubious Test returned status 3 (wstat 768, 0x300) DIED. FAILED tests 25-27 Failed 3/34 tests, 91.18% okay t/15_test_brent............. # Failed test '1*x^0.5 + -1*x^0 ->brent(a => 0, b => 10, precision => 0.1) = 0 (got 1)' # at t/15_test_brent.t line 26. # Looks like you failed 1 test of 43. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 32 Failed 1/43 tests, 97.67% okay t/pod-coverage..............skipped all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage t/pod.......................skipped all skipped: Test::Pod 1.14 required for testing POD Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/06_test_eval.t 1 256 54 1 29 t/12_test_newton_raphson.t 4 1024 26 5 10-13 27 t/14_test_secant.t 3 768 34 3 25-27 t/15_test_brent.t 1 256 43 1 32 2 tests skipped. Failed 4/17 test scripts. 8/261 subtests failed. Files=17, Tests=261, 3 wallclock secs ( 0.08 cusr + 2.60 csys = 2.68 CPU) Failed 4/17 test programs. 8/261 subtests failed. *** Error code 25 Stop in /home/chris/.cpanplus/5.8.8/build/Math-Polynom-0.04 (line 753 of Makefile). PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Carp 1.04 Data::Dumper 2.121_08 accessors 0.02 constant 1.05 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /home/chris/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:. PERL5LIB = :/home/chris/.cpanplus/5.8.8/build/accessors-0.02/blib/lib:/home/chris/.cpanplus/5.8.8/build/accessors-0.02/blib/arch:/home/chris/.cpanplus/5.8.8/build/accessors-0.02/blib:/home/chris/.cpanplus/5.8.8/build/accessors-0.02/blib/lib:/home/chris/.cpanplus/5.8.8/build/accessors-0.02/blib/arch:/home/chris/.cpanplus/5.8.8/build/accessors-0.02/blib:/home/chris/.cpanplus/5.8.8/build/Math-Polynom-0.04/blib/lib:/home/chris/.cpanplus/5.8.8/build/Math-Polynom-0.04/blib/arch:/home/chris/.cpanplus/5.8.8/build/Math-Polynom-0.04/blib PERL5_CPANPLUS_IS_RUNNING = 14796 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/ksh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 1000 0 1000 EGID: $) = 1000 0 1000 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=openbsd, osvers=4.0, archname=i386-openbsd uname='openbsd' config_args='-dsE -Dopenbsd_distribution=defined' hint=recommended, useposix=true, d_sigaction=define usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include', optimize='-O2', cppflags='-fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include' ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.0' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags ='-Wl,-E ' libpth=/usr/lib libs=-lm -lutil -lc perllibs=-lm -lutil -lc libc=/usr/lib/libc.a, so=so, useshrplib=true, libperl=libperl.so.10.1 gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-R/usr/libdata/perl5/i386-openbsd/5.8.8/CORE' cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC '
