This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear KOKOGIKO, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Wed Jan 17 14:49:40 2007] Trying to get 'http://www.cpan.org/authors/id/K/KO/KOKOGIKO/Geo-Coder-YahooJapan-Inverse-0.02.tar.gz' [MSG] [Wed Jan 17 14:49:41 2007] Trying to get 'http://www.cpan.org/authors/id/K/KO/KOKOGIKO/CHECKSUMS' [MSG] [Wed Jan 17 14:49:43 2007] Checksum matches for 'Geo-Coder-YahooJapan-Inverse-0.02.tar.gz' [MSG] [Wed Jan 17 14:49:43 2007] Extracted 'Geo-Coder-YahooJapan-Inverse-0.02/' [MSG] [Wed Jan 17 14:49:43 2007] Extracted 'Geo-Coder-YahooJapan-Inverse-0.02/lib/' [MSG] [Wed Jan 17 14:49:43 2007] Extracted 'Geo-Coder-YahooJapan-Inverse-0.02/lib/Geo/' [MSG] [Wed Jan 17 14:49:43 2007] Extracted 'Geo-Coder-YahooJapan-Inverse-0.02/lib/Geo/Coder/' [MSG] [Wed Jan 17 14:49:43 2007] Extracted 'Geo-Coder-YahooJapan-Inverse-0.02/lib/Geo/Coder/YahooJapan/' [MSG] [Wed Jan 17 14:49:43 2007] Extracted 'Geo-Coder-YahooJapan-Inverse-0.02/lib/Geo/Coder/YahooJapan/Inverse.pm' [MSG] [Wed Jan 17 14:49:43 2007] Extracted 'Geo-Coder-YahooJapan-Inverse-0.02/Makefile.PL' [MSG] [Wed Jan 17 14:49:43 2007] Extracted 'Geo-Coder-YahooJapan-Inverse-0.02/MANIFEST' [MSG] [Wed Jan 17 14:49:43 2007] Extracted 'Geo-Coder-YahooJapan-Inverse-0.02/META.yml' [MSG] [Wed Jan 17 14:49:43 2007] Extracted 'Geo-Coder-YahooJapan-Inverse-0.02/README' [MSG] [Wed Jan 17 14:49:43 2007] Extracted 'Geo-Coder-YahooJapan-Inverse-0.02/Changes' [MSG] [Wed Jan 17 14:49:43 2007] Extracted 'Geo-Coder-YahooJapan-Inverse-0.02/t/' [MSG] [Wed Jan 17 14:49:43 2007] Extracted 'Geo-Coder-YahooJapan-Inverse-0.02/t/Geo-Coder-YahooJapan-Inverse.t' [MSG] [Wed Jan 17 14:49:43 2007] Extracted 'Geo::Coder::YahooJapan::Inverse' to '/home/chris/.cpanplus/5.8.8/build/Geo-Coder-YahooJapan-Inverse-0.02' [MSG] [Wed Jan 17 14:49:45 2007] Checking if your kit is complete... Looks good Warning: prerequisite Location::GeoTool 1.98 not found. Writing Makefile for Geo::Coder::YahooJapan::Inverse [MSG] [Wed Jan 17 14:49:45 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Wed Jan 17 14:49:45 2007] Module 'Geo::Coder::YahooJapan::Inverse' requires 'Location::GeoTool' version '1.98' to be installed [MSG] [Wed Jan 17 14:49:45 2007] Trying to get 'http://www.cpan.org/authors/id/K/KO/KOKOGIKO/Location-GeoTool-1.98.tar.gz' [MSG] [Wed Jan 17 14:49:46 2007] Trying to get 'http://www.cpan.org/authors/id/K/KO/KOKOGIKO/CHECKSUMS' [MSG] [Wed Jan 17 14:49:46 2007] Checksum matches for 'Location-GeoTool-1.98.tar.gz' [MSG] [Wed Jan 17 14:49:46 2007] Extracted 'Location-GeoTool-1.98/' [MSG] [Wed Jan 17 14:49:46 2007] Extracted 'Location-GeoTool-1.98/t/' [MSG] [Wed Jan 17 14:49:46 2007] Extracted 'Location-GeoTool-1.98/t/02_datum.t' [MSG] [Wed Jan 17 14:49:46 2007] Extracted 'Location-GeoTool-1.98/t/04_dirstring.t' [MSG] [Wed Jan 17 14:49:46 2007] Extracted 'Location-GeoTool-1.98/t/00_compile.t' [MSG] [Wed Jan 17 14:49:46 2007] Extracted 'Location-GeoTool-1.98/t/01_format.t' [MSG] [Wed Jan 17 14:49:46 2007] Extracted 'Location-GeoTool-1.98/t/03_direction.t' [MSG] [Wed Jan 17 14:49:46 2007] Extracted 'Location-GeoTool-1.98/Changes' [MSG] [Wed Jan 17 14:49:46 2007] Extracted 'Location-GeoTool-1.98/MANIFEST' [MSG] [Wed Jan 17 14:49:47 2007] Extracted 'Location-GeoTool-1.98/lib/' [MSG] [Wed Jan 17 14:49:47 2007] Extracted 'Location-GeoTool-1.98/lib/Location/' [MSG] [Wed Jan 17 14:49:47 2007] Extracted 'Location-GeoTool-1.98/lib/Location/GeoTool/' [MSG] [Wed Jan 17 14:49:47 2007] Extracted 'Location-GeoTool-1.98/lib/Location/GeoTool/Japanese.pod' [MSG] [Wed Jan 17 14:49:47 2007] Extracted 'Location-GeoTool-1.98/lib/Location/GeoTool/Aura.pm' [MSG] [Wed Jan 17 14:49:47 2007] Extracted 'Location-GeoTool-1.98/lib/Location/GeoTool/Direction.pm' [MSG] [Wed Jan 17 14:49:47 2007] Extracted 'Location-GeoTool-1.98/lib/Location/GeoTool/Direction/' [MSG] [Wed Jan 17 14:49:47 2007] Extracted 'Location-GeoTool-1.98/lib/Location/GeoTool/Direction/Japanese.pod' [MSG] [Wed Jan 17 14:49:47 2007] Extracted 'Location-GeoTool-1.98/lib/Location/GeoTool.pm' [MSG] [Wed Jan 17 14:49:47 2007] Extracted 'Location-GeoTool-1.98/ppport.h' [MSG] [Wed Jan 17 14:49:47 2007] Extracted 'Location-GeoTool-1.98/META.yml' [MSG] [Wed Jan 17 14:49:47 2007] Extracted 'Location-GeoTool-1.98/GeoTool.xs' [MSG] [Wed Jan 17 14:49:47 2007] Extracted 'Location-GeoTool-1.98/README' [MSG] [Wed Jan 17 14:49:47 2007] Extracted 'Location-GeoTool-1.98/Makefile.PL' [MSG] [Wed Jan 17 14:49:47 2007] Extracted 'Location::GeoTool' to '/home/chris/.cpanplus/5.8.8/build/Location-GeoTool-1.98' [MSG] [Wed Jan 17 14:49:48 2007] Checking if your kit is complete... Looks good Writing Makefile for Location::GeoTool [MSG] [Wed Jan 17 14:49:48 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Wed Jan 17 14:49:55 2007] cp lib/Location/GeoTool/Direction/Japanese.pod blib/lib/Location/GeoTool/Direction/Japanese.pod cp lib/Location/GeoTool/Aura.pm blib/lib/Location/GeoTool/Aura.pm cp lib/Location/GeoTool.pm blib/lib/Location/GeoTool.pm cp lib/Location/GeoTool/Direction.pm blib/lib/Location/GeoTool/Direction.pm cp lib/Location/GeoTool/Japanese.pod blib/lib/Location/GeoTool/Japanese.pod /usr/home/chris/perl588/bin/perl /usr/home/chris/perl588/lib/5.8.8/ExtUtils/xsubpp -typemap /usr/home/chris/perl588/lib/5.8.8/ExtUtils/typemap GeoTool.xs > GeoTool.xsc && mv GeoTool.xsc GeoTool.c Please specify prototyping behavior for GeoTool.xs (see perlxs manual) cc -c -I. -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -O -DVERSION=\"1.98\" -DXS_VERSION=\"1.98\" -DPIC -fPIC "-I/usr/home/chris/perl588/lib/5.8.8/i386-freebsd-thread-multi-64int/CORE" GeoTool.c In file included from GeoTool.xs:5: ppport.h:231:1: warning: "PERL_UNUSED_DECL" redefined In file included from GeoTool.xs:2: /usr/home/chris/perl588/lib/5.8.8/i386-freebsd-thread-multi-64int/CORE/perl.h:163:1: warning: this is the location of the previous definition Running Mkbootstrap for Location::GeoTool () chmod 644 GeoTool.bs rm -f blib/arch/auto/Location/GeoTool/GeoTool.so cc -shared -L/usr/local/lib GeoTool.o -o blib/arch/auto/Location/GeoTool/GeoTool.so chmod 755 blib/arch/auto/Location/GeoTool/GeoTool.so cp GeoTool.bs blib/arch/auto/Location/GeoTool/GeoTool.bs chmod 644 blib/arch/auto/Location/GeoTool/GeoTool.bs Manifying blib/man3/Location::GeoTool::Direction::Japanese.3 Manifying blib/man3/Location::GeoTool.3 Manifying blib/man3/Location::GeoTool::Direction.3 Manifying blib/man3/Location::GeoTool::Japanese.3 [MSG] [Wed Jan 17 14:50:00 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /usr/home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_compile......ok t/01_format.......ok t/02_datum........ok t/03_direction....ok t/04_dirstring....ok All tests successful. Files=5, Tests=533, 4 wallclock secs ( 0.70 cusr + 1.01 csys = 1.70 CPU) [MSG] [Wed Jan 17 14:50:09 2007] Successfully sent 'pass' report for 'Location-GeoTool-1.98' [MSG] [Wed Jan 17 14:50:13 2007] cp lib/Geo/Coder/YahooJapan/Inverse.pm blib/lib/Geo/Coder/YahooJapan/Inverse.pm Manifying blib/man3/Geo::Coder::YahooJapan::Inverse.3 [ERROR] [Wed Jan 17 14:50:15 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /usr/home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/Geo-Coder-YahooJapan-Inverse.... # Failed test 'use Geo::Coder::YahooJapan::Inverse;' # at t/Geo-Coder-YahooJapan-Inverse.t line 9. # Tried to use 'Geo::Coder::YahooJapan::Inverse'. # Error: Can't locate XML/Simple.pm in @INC (@INC contains: /usr/home/chris/.cpanplus/5.8.8/build/Geo-Coder-YahooJapan-Inverse-0.02/blib/lib /usr/home/chris/.cpanplus/5.8.8/build/Geo-Coder-YahooJapan-Inverse-0.02/blib/arch /home/chris/.cpanplus/5.8.8/build/Location-GeoTool-1.98/blib/lib /home/chris/.cpanplus/5.8.8/build/Location-GeoTool-1.98/blib/arch /home/chris/.cpanplus/5.8.8/build/Location-GeoTool-1.98/blib /home/chris/.cpanplus/5.8.8/build/Geo-Coder-YahooJapan-Inverse-0.02/blib/lib /home/chris/.cpanplus/5.8.8/build/Geo-Coder-YahooJapan-Inverse-0.02/blib/arch /home/chris/.cpanplus/5.8.8/build/Geo-Coder-YahooJapan-Inverse-0.02/blib /usr/home/chris/perl588/lib/5.8.8/i386-freebsd-thread-multi-64int /usr/home/chris/perl588/lib/5.8.8/i386-freebsd-thread-multi-64int /usr/home/chris/perl588/lib/5.8.8 /usr/home/chris/perl588/lib/site_perl/5.8.8/i386-freebsd-thread-multi-64int /usr/home/chris/perl588/lib/site_perl/5.8.8/i386-freebsd-thread-multi-64int /usr/home/chris/perl588/lib/site_perl/5.8.8 /usr/home/chris/perl588/lib/site_perl/5.8.8/i386-freebsd-thread-multi-64int /usr/home/chris/perl588/lib/site_perl/5.8.8 /usr/home/chris/perl588/lib/site_perl . /usr/home/chris/perl588/lib/5.8.8/i386-freebsd-thread-multi-64int /usr/home/chris/perl588/lib/5.8.8 /usr/home/chris/perl588/lib/site_perl/5.8.8/i386-freebsd-thread-multi-64int /usr/home/chris/perl588/lib/site_perl/5.8.8 /usr/home/chris/perl588/lib/site_perl .) at /usr/home/chris/.cpanplus/5.8.8/build/Geo-Coder-YahooJapan-Inverse-0.02/blib/lib/Geo/Coder/YahooJapan/Inverse.pm line 10. # BEGIN failed--compilation aborted at t/Geo-Coder-YahooJapan-Inverse.t line 9. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Undefined subroutine &main::invlookup called at t/Geo-Coder-YahooJapan-Inverse.t line 20, <DATA> line 1. # Looks like you planned 10 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-10 Failed 10/10 tests, 0.00% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/Geo-Coder-YahooJapan-Inverse.t 255 65280 10 19 1-10 Failed 1/1 test scripts. 10/10 subtests failed. Files=1, Tests=10, 1 wallclock secs ( 0.16 cusr + 0.30 csys = 0.46 CPU) Failed 1/1 test programs. 10/10 subtests failed. *** Error code 255 Stop in /usr/home/chris/.cpanplus/5.8.8/build/Geo-Coder-YahooJapan-Inverse-0.02. MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: XML::Simple As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'KOKOGIKO ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'XML::Simple' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Location::GeoTool 1.98 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/X11R6/bin:/home/chris/bin PERL5LIB = :/home/chris/.cpanplus/5.8.8/build/Location-GeoTool-1.98/blib/lib:/home/chris/.cpanplus/5.8.8/build/Location-GeoTool-1.98/blib/arch:/home/chris/.cpanplus/5.8.8/build/Location-GeoTool-1.98/blib:/home/chris/.cpanplus/5.8.8/build/Location-GeoTool-1.98/blib/lib:/home/chris/.cpanplus/5.8.8/build/Location-GeoTool-1.98/blib/arch:/home/chris/.cpanplus/5.8.8/build/Location-GeoTool-1.98/blib:/home/chris/.cpanplus/5.8.8/build/Geo-Coder-YahooJapan-Inverse-0.02/blib/lib:/home/chris/.cpanplus/5.8.8/build/Geo-Coder-YahooJapan-Inverse-0.02/blib/arch:/home/chris/.cpanplus/5.8.8/build/Geo-Coder-YahooJapan-Inverse-0.02/blib PERL5_CPANPLUS_IS_RUNNING = 31574 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/sh TERM = cons25 Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /usr/home/chris/perl588/bin/perl UID: $< = 1001 EUID: $> = 1001 GID: $( = 1001 0 1001 1001 EGID: $) = 1001 0 1001 1001 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=freebsd, osvers=6.2-rc1, archname=i386-freebsd-thread-multi-64int uname='freebsd frodo.localdomain 6.2-rc1 freebsd 6.2-rc1 #0: thu nov 16 05:01:36 utc 2006 [EMAIL PROTECTED]:usrobjusrsrcsysgeneric i386 ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include', optimize='-O', cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.6 [FreeBSD] 20060305', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib' libpth=/usr/lib /usr/local/lib libs=-lm -lcrypt -lutil -lc_r perllibs=-lm -lcrypt -lutil -lc_r libc=, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -Wl,-R/usr/home/chris/perl588/lib/5.8.8/i386-freebsd-thread-multi-64int/CORE' cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
