This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear WSNYDER, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Thu Jan 25 08:16:52 2007] Trying to get 'http://www.cpan.org/authors/id/W/WS/WSNYDER/IPC-Locker-1.461.tar.gz' [MSG] [Thu Jan 25 08:16:53 2007] Trying to get 'http://www.cpan.org/authors/id/W/WS/WSNYDER/CHECKSUMS' [MSG] [Thu Jan 25 08:16:53 2007] Checksum matches for 'IPC-Locker-1.461.tar.gz' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/lockersh' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/lib/' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/lib/IPC/' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/lib/IPC/PidStat/' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/lib/IPC/PidStat/PidServer.pm' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/lib/IPC/Locker.pm' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/lib/IPC/PidStat.pm' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/lib/IPC/Locker/' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/lib/IPC/Locker/Server.pm' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/t/' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/t/40_locker.t' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/t/test_utils.pl' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/t/01_manifest.t' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/t/00_pod.t' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/t/20_pidstat.t' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/t/45_lockersh.t' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/pidwatch' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/init.d/' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/init.d/pidstatd' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/init.d/lockerd' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/COPYING' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/Changes' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/MANIFEST' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/pidstatd' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/readme.texi' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/META.yml' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/nagios/' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/nagios/check_pidstatd' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/nagios/check_lockerd' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/lockerd' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/pidstat' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/README' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC-Locker-1.461/Makefile.PL' [MSG] [Thu Jan 25 08:16:54 2007] Extracted 'IPC::Locker' to '/home/hybrid/perl588/.cpanplus/5.8.8/build/IPC-Locker-1.461' [MSG] [Thu Jan 25 08:16:55 2007] Checking if your kit is complete... Looks good Writing Makefile for IPC::Locker [MSG] [Thu Jan 25 08:16:55 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Jan 25 08:17:04 2007] cp lib/IPC/PidStat/PidServer.pm blib/lib/IPC/PidStat/PidServer.pm cp lib/IPC/Locker/Server.pm blib/lib/IPC/Locker/Server.pm cp lib/IPC/PidStat.pm blib/lib/IPC/PidStat.pm cp lib/IPC/Locker.pm blib/lib/IPC/Locker.pm cp lockersh blib/script/lockersh /home/hybrid/perl588/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/lockersh cp pidwatch blib/script/pidwatch /home/hybrid/perl588/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/pidwatch cp lockerd blib/script/lockerd /home/hybrid/perl588/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/lockerd cp pidstatd blib/script/pidstatd /home/hybrid/perl588/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/pidstatd Manifying blib/man1/lockersh.1 Manifying blib/man1/pidwatch.1 Manifying blib/man1/lockerd.1 Manifying blib/man1/pidstatd.1 Manifying blib/man3/IPC::PidStat::PidServer.3 Manifying blib/man3/IPC::Locker::Server.3 Manifying blib/man3/IPC::PidStat.3 Manifying blib/man3/IPC::Locker.3 [ERROR] [Thu Jan 25 08:17:16 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/hybrid/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_pod.........ok 1/1 skipped: various reasons t/01_manifest....ok 1/1 skipped: various reasons t/20_pidstat.....Can't locate utils.pm in @INC (@INC contains: /usr/lib/nagios/plugins ../blib/lib blib/arch blib/lib /home/hybrid/perl588/.cpanplus/5.8.8/build/IPC-Locker-1.461/blib/lib /home/hybrid/perl588/.cpanplus/5.8.8/build/IPC-Locker-1.461/blib/arch /home/hybrid/perl588/.cpanplus/5.8.8/build/IPC-Locker-1.461/blib /home/hybrid/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/hybrid/perl588/lib/5.8.8 /home/hybrid/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/hybrid/perl588/lib/site_perl/5.8.8 /home/hybrid/perl588/lib/site_perl .) at nagios/check_pidstatd line 25. BEGIN failed--compilation aborted at nagios/check_pidstatd line 25. # Failed test 14 in t/20_pidstat.t at line 102 # t/20_pidstat.t line 102 is: ok($rtn =~ /OK/); FAILED test 14 Failed 1/14 tests, 92.86% okay t/40_locker......ok t/45_lockersh....ok Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/20_pidstat.t 14 1 14 2 subtests skipped. Failed 1/5 test scripts. 1/35 subtests failed. Files=5, Tests=35, 12 wallclock secs ( 7.36 cusr + 0.71 csys = 8.07 CPU) Failed 1/5 test programs. 1/35 subtests failed. MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: utils As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'WSNYDER ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'utils' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Net::Domain 2.19 Time::HiRes 1.9704 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.4.26, archname=i686-linux-thread-multi-64int-ld uname='linux penguin 2.4.26 #1 smp thu jul 1 18:22:25 bst 2004 i686 unknown unknown gnulinux ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='3.3.4', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.2.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.2' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
