This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear AKAPLAN, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Feb 12 10:47:50 2007] Trying to get 'http://www.cpan.org/authors/id/A/AK/AKAPLAN/PerlIO-via-Logger-0.03.tar.gz' [MSG] [Mon Feb 12 10:47:51 2007] Trying to get 'http://www.cpan.org/authors/id/A/AK/AKAPLAN/CHECKSUMS' [MSG] [Mon Feb 12 10:47:51 2007] Checksum matches for 'PerlIO-via-Logger-0.03.tar.gz' [MSG] [Mon Feb 12 10:47:52 2007] Extracted 'PerlIO-via-Logger-0.03/' [MSG] [Mon Feb 12 10:47:52 2007] Extracted 'PerlIO-via-Logger-0.03/lib/' [MSG] [Mon Feb 12 10:47:52 2007] Extracted 'PerlIO-via-Logger-0.03/lib/PerlIO/' [MSG] [Mon Feb 12 10:47:52 2007] Extracted 'PerlIO-via-Logger-0.03/lib/PerlIO/via/' [MSG] [Mon Feb 12 10:47:52 2007] Extracted 'PerlIO-via-Logger-0.03/lib/PerlIO/via/Logger.pm' [MSG] [Mon Feb 12 10:47:52 2007] Extracted 'PerlIO-via-Logger-0.03/Makefile.PL' [MSG] [Mon Feb 12 10:47:52 2007] Extracted 'PerlIO-via-Logger-0.03/t/' [MSG] [Mon Feb 12 10:47:52 2007] Extracted 'PerlIO-via-Logger-0.03/t/pod.t' [MSG] [Mon Feb 12 10:47:52 2007] Extracted 'PerlIO-via-Logger-0.03/t/pod-coverage.t' [MSG] [Mon Feb 12 10:47:52 2007] Extracted 'PerlIO-via-Logger-0.03/t/00-load.t' [MSG] [Mon Feb 12 10:47:52 2007] Extracted 'PerlIO-via-Logger-0.03/t/Logger.t' [MSG] [Mon Feb 12 10:47:52 2007] Extracted 'PerlIO-via-Logger-0.03/META.yml' [MSG] [Mon Feb 12 10:47:52 2007] Extracted 'PerlIO-via-Logger-0.03/Changes' [MSG] [Mon Feb 12 10:47:52 2007] Extracted 'PerlIO::via::Logger' to '/home/chris/.cpanplus/5.8.7/build/PerlIO-via-Logger-0.03' [MSG] [Mon Feb 12 10:47:53 2007] Writing Makefile for PerlIO::via::Logger [MSG] [Mon Feb 12 10:47:53 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Feb 12 10:47:56 2007] cp lib/PerlIO/via/Logger.pm blib/lib/PerlIO/via/Logger.pm Manifying blib/man3/PerlIO::via::Logger.3 [ERROR] [Mon Feb 12 10:47:59 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /usr/local/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00-load.........# Testing PerlIO::via::Logger 0.03, Perl 5.008007, /usr/local/bin/perl ok t/Logger.......... # Failed test 'check prefixed content' # at t/Logger.t line 45. # got: '[2d]Some Line # [2d]Another Line # ' # expected: '[12]Some Line # [12]Another Line # ' # Failed test 'read from the previously created file' # at t/Logger.t line 56. # got: '[2d][2d]Some Line # ' # expected: '[12][12]Some Line # ' # Looks like you failed 2 tests of 13. dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED tests 8, 11 Failed 2/13 tests, 84.62% okay t/pod-coverage....ok t/pod.............ok Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/Logger.t 2 512 13 2 8 11 Failed 1/4 test scripts. 2/16 subtests failed. Files=4, Tests=16, 2 wallclock secs ( 1.14 cusr + 0.38 csys = 1.52 CPU) Failed 1/4 test programs. 2/16 subtests failed. *** Error code 35 Stop in /usr/home/chris/.cpanplus/5.8.7/build/PerlIO-via-Logger-0.03. PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: POSIX 1.08 Test::More 0.67 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/X11R6/bin:/home/chris/bin PERL5LIB = :/home/chris/.cpanplus/5.8.7/build/PerlIO-via-Logger-0.03/blib/lib:/home/chris/.cpanplus/5.8.7/build/PerlIO-via-Logger-0.03/blib/arch:/home/chris/.cpanplus/5.8.7/build/PerlIO-via-Logger-0.03/blib PERL5_CPANPLUS_IS_RUNNING = 51576 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/sh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /usr/local/bin/perl UID: $< = 1001 EUID: $> = 1001 GID: $( = 0 0 0 EGID: $) = 0 0 0 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 7) configuration: Platform: osname=freebsd, osvers=6.0-release, archname=alpha-freebsd uname='freebsd alpha.bingosnet.co.uk 6.0-release freebsd 6.0-release #0: thu nov 3 01:10:43 utc 2005 [EMAIL PROTECTED]:usrobjusrsrcsysgeneric alpha ' config_args='-sde -Dprefix=/usr/local -Darchlib=/usr/local/lib/perl5/5.8.7/mach -Dprivlib=/usr/local/lib/perl5/5.8.7 -Dman3dir=/usr/local/lib/perl5/5.8.7/perl/man/man3 -Dman1dir=/usr/local/man/man1 -Dsitearch=/usr/local/lib/perl5/site_perl/5.8.7/mach -Dsitelib=/usr/local/lib/perl5/site_perl/5.8.7 -Dscriptdir=/usr/local/bin -Dsiteman3dir=/usr/local/lib/perl5/5.8.7/man/man3 -Dsiteman1dir=/usr/local/man/man1 -Ui_malloc -Ui_iconv -Uinstallusrbinperl -Dcc=cc -Duseshrplib -Dccflags=-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.7/BSDPAN" -Doptimize=-O2 -fno-strict-aliasing -pipe -mcpu=ev4 -mtune=ev5 -mieee -Ud_dosuid -Ui_gdbm -Dusethreads=n -Dusemymalloc=y -Duse64bitint' hint=recommended, useposix=true, d_sigaction=define usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=undef usemymalloc=y, bincompat5005=undef Compiler: cc='cc', ccflags ='-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.7/BSDPAN" -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe', optimize='-O2 -fno-strict-aliasing -pipe -mcpu=ev4 -mtune=ev5 -mieee', cppflags='-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.7/BSDPAN" -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe' ccversion='', gccversion='3.4.4 [FreeBSD] 20050518', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8 ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='cc', ldflags ='-pthread -Wl,-E' libpth=/usr/lib libs=-lm -lcrypt -lutil perllibs=-lm -lcrypt -lutil libc=, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -Wl,-R/usr/local/lib/perl5/5.8.7/mach/CORE' cccdlflags='-DPIC -fPIC', lddlflags='-shared '
