This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear MARKO, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Tue Feb 13 10:10:49 2007] Trying to get 'http://www.cpan.org/authors/id/M/MA/MARKO/Convert-Cisco-0.06.tar.gz' [MSG] [Tue Feb 13 10:10:50 2007] Trying to get 'http://www.cpan.org/authors/id/M/MA/MARKO/CHECKSUMS' [MSG] [Tue Feb 13 10:10:51 2007] Checksum matches for 'Convert-Cisco-0.06.tar.gz' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/.cvsignore' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/Build.PL' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/Changes' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/MANIFEST' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/META.yml' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/README' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/lib' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/lib/Convert' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/lib/Convert/Cisco.pm' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/t' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/t/00-load.t' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/t/01-TestUnitRunner.t' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/t/boilerplate.t' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/t/pod-coverage.t' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/t/pod.t' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/t/TestCase.pm' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/t/Convert' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/t/Convert/CiscoTest.pm' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/t/data' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/t/data/cdr_20061026133657_105573.bin' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/t/data/cdr_20061026133657_105573.noconfig.xml' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert-Cisco-0.06/t/data/cdr_20061026133657_105573.xml' [MSG] [Tue Feb 13 10:10:51 2007] Extracted '/bin/tar: Read 6144 bytes from -' [MSG] [Tue Feb 13 10:10:51 2007] Extracted 'Convert::Cisco' to '/opt/perl/testers/.cpanplus/5.8.8/build/Convert-Cisco-0.06' [ERROR] [Tue Feb 13 10:10:51 2007] This module requires 'Module::Build' and 'CPANPLUS::Dist::Build' to be installed, but you don't have it! Will fall back to 'CPANPLUS::Dist::MM', but might not be able to install! [MSG] [Tue Feb 13 10:10:51 2007] No 'Makefile.PL' found - attempting to generate one [MSG] [Tue Feb 13 10:10:52 2007] Checking if your kit is complete... Looks good Writing Makefile for Convert::Cisco [MSG] [Tue Feb 13 10:10:52 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Tue Feb 13 10:10:52 2007] cp lib/Convert/Cisco.pm blib/lib/Convert/Cisco.pm Manifying blib/man3/Convert::Cisco.3 [ERROR] [Tue Feb 13 10:10:53 2007] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/00-load.............. # Failed test 'use Convert::Cisco;' # at t/00-load.t line 6. # Tried to use 'Convert::Cisco'. # Error: Can't locate Log/Log4perl.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/Convert-Cisco-0.06/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Convert-Cisco-0.06/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/POE-0.9917/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/POE-0.9917/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/POE-0.9917/blib /opt/perl/testers/.cpanplus/5.8.8/build/Data-Dump-1.08/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Data-Dump-1.08/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Data-Dump-1.08/blib /opt/perl/testers/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib /opt/perl/testers/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib /opt/p! erl/testers/.cpanplus/5.8.8/build/Net-IP-1.25/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Net-IP-1.25/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Net-IP-1.25/blib /opt/perl/testers/.cpanplus/5.8.8/build/Net-DNS-0.59/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Net-DNS-0.59/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Net-DNS-0.59/blib /opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-DNS-1.00/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-DNS-1.00/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-DNS-1.00/blib /opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Keepalive-0.0901/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Keepalive-0.0901/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Keepalive-0.0901/blib /opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-HTTP-0.81/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Clien! t-HTTP-0.81/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/! POE-Comp onent-Client-HTTP-0.81/blib /opt/perl/testers/.cpanplus/5.8.8/build/AppConfig-1.64/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/AppConfig-1.64/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/AppConfig-1.64/blib /opt/perl/testers/.cpanplus/5.8.8/build/Template-Toolkit-2.18/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Template-Toolkit-2.18/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Template-Toolkit-2.18/blib /opt/perl/testers/.cpanplus/5.8.8/build/Crypt-OpenSSL-Random-0.03/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Crypt-OpenSSL-Random-0.03/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Crypt-OpenSSL-Random-0.03/blib /opt/perl/testers/.cpanplus/5.8.8/build/Crypt-OpenSSL-RSA-0.24/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Crypt-OpenSSL-RSA-0.24/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Crypt-OpenSSL-RSA-0.24/blib /opt/perl/testers/.cpanplus/5.8.8/build/Error-0.17008/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Error-0.17008/blib/arch ! /opt/perl/testers/.cpanplus/5.8.8/build/Error-0.17008/blib /opt/perl/testers/.cpanplus/5.8.8/build/MailTools-1.74/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/MailTools-1.74/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/MailTools-1.74/blib /opt/perl/testers/.cpanplus/5.8.8/build/Mail-DKIM-0.22/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Mail-DKIM-0.22/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Mail-DKIM-0.22/blib /opt/perl/testers/.cpanplus/5.8.8/build/Convert-Cisco-0.06/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl . /opt/perl/testers/lib/5.8.8/x86_64! -linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/t! esters/l ib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl) at /opt/perl/testers/.cpanplus/5.8.8/build/Convert-Cisco-0.06/blib/lib/Convert/Cisco.pm line 10. # BEGIN failed--compilation aborted at t/00-load.t line 6. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Use of uninitialized value in concatenation (.) or string at t/00-load.t line 9. # Testing Convert::Cisco , Perl 5.008008, /opt/perl/testers/bin/perl # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/01-TestUnitRunner....Can't locate Test/Unit/HarnessUnit.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/Convert-Cisco-0.06/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Convert-Cisco-0.06/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/POE-0.9917/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/POE-0.9917/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/POE-0.9917/blib /opt/perl/testers/.cpanplus/5.8.8/build/Data-Dump-1.08/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Data-Dump-1.08/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Data-Dump-1.08/blib /opt/perl/testers/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib /opt/perl/testers/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Digest-HMA! C-1.01/blib /opt/perl/testers/.cpanplus/5.8.8/build/Net-IP-1.25/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Net-IP-1.25/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Net-IP-1.25/blib /opt/perl/testers/.cpanplus/5.8.8/build/Net-DNS-0.59/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Net-DNS-0.59/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Net-DNS-0.59/blib /opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-DNS-1.00/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-DNS-1.00/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-DNS-1.00/blib /opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Keepalive-0.0901/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Keepalive-0.0901/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Keepalive-0.0901/blib /opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-HTTP-0.81/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/P! OE-Component-Client-HTTP-0.81/blib/arch /opt/perl/testers/.cpa! nplus/5. 8.8/build/POE-Component-Client-HTTP-0.81/blib /opt/perl/testers/.cpanplus/5.8.8/build/AppConfig-1.64/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/AppConfig-1.64/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/AppConfig-1.64/blib /opt/perl/testers/.cpanplus/5.8.8/build/Template-Toolkit-2.18/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Template-Toolkit-2.18/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Template-Toolkit-2.18/blib /opt/perl/testers/.cpanplus/5.8.8/build/Crypt-OpenSSL-Random-0.03/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Crypt-OpenSSL-Random-0.03/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Crypt-OpenSSL-Random-0.03/blib /opt/perl/testers/.cpanplus/5.8.8/build/Crypt-OpenSSL-RSA-0.24/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Crypt-OpenSSL-RSA-0.24/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Crypt-OpenSSL-RSA-0.24/blib /opt/perl/testers/.cpanplus/5.8.8/build/Error-0.17008/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Error-! 0.17008/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Error-0.17008/blib /opt/perl/testers/.cpanplus/5.8.8/build/MailTools-1.74/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/MailTools-1.74/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/MailTools-1.74/blib /opt/perl/testers/.cpanplus/5.8.8/build/Mail-DKIM-0.22/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Mail-DKIM-0.22/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Mail-DKIM-0.22/blib /opt/perl/testers/.cpanplus/5.8.8/build/Convert-Cisco-0.06/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl . /opt/perl/tester! s/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib! /5.8.8 / opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .) at t/01-TestUnitRunner.t line 6. BEGIN failed--compilation aborted at t/01-TestUnitRunner.t line 6. dubious Test returned status 2 (wstat 512, 0x200) t/boilerplate..........couldn't open lib\Convert\Cisco.pm for reading: [EMAIL PROTECTED] at t/boilerplate.t line 9. # Looks like you planned 3 tests but only ran 2. # Looks like your test died just after 2. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED test 3 Failed 1/3 tests, 66.67% okay t/pod-coverage.........ok t/pod..................ok Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/00-load.t 1 256 1 1 1 t/01-TestUnitRunner.t 2 512 ?? ?? ?? t/boilerplate.t 255 65280 3 2 3 Failed 3/5 test scripts. 2/6 subtests failed. Files=5, Tests=6, 1 wallclock secs ( 0.26 cusr + 0.08 csys = 0.34 CPU) Failed 3/5 test programs. 2/6 subtests failed. make: *** [test_dynamic] Error 255 MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Log::Log4perl Test::Unit::HarnessUnit As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'MARKO ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Log::Log4perl' => '0', # or a minimum working version 'Test::Unit::HarnessUnit' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.16.29, archname=x86_64-linux-thread-multi-ld uname='linux rinse 2.6.16.29 #1 smp sun nov 5 23:08:05 cst 2006 x86_64 gnulinux ' config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true [EMAIL PROTECTED]' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g -O3', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.4 20050314 (prerelease) (Debian 3.4.3-13sarge1)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8 alignbytes=16, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.2.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.2' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE' cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
