This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.
        
--

Dear Jan Krynicky,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.076. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Tue Feb 20 23:04:01 2007] Trying to get 
'http://www.cpan.org/authors/id/A/AL/ALBERS/Config-LotusNotes-0.30.tar.gz'
[MSG] [Tue Feb 20 23:04:02 2007] Trying to get 
'http://www.cpan.org/authors/id/A/AL/ALBERS/CHECKSUMS'
[MSG] [Tue Feb 20 23:04:03 2007] Checksum matches for 
'Config-LotusNotes-0.30.tar.gz'
[MSG] [Tue Feb 20 23:04:03 2007] Extracted 'Config-LotusNotes-0.30/'
[MSG] [Tue Feb 20 23:04:03 2007] Extracted 'Config-LotusNotes-0.30/Changes'
[MSG] [Tue Feb 20 23:04:03 2007] Extracted 
'Config-LotusNotes-0.30/Config-LotusNotes.ppd'
[MSG] [Tue Feb 20 23:04:03 2007] Extracted 
'Config-LotusNotes-0.30/Config-LotusNotes.tar.gz'
[MSG] [Tue Feb 20 23:04:03 2007] Extracted 'Config-LotusNotes-0.30/demo/'
[MSG] [Tue Feb 20 23:04:03 2007] Extracted 
'Config-LotusNotes-0.30/demo/editnotesini.pl'
[MSG] [Tue Feb 20 23:04:03 2007] Extracted 
'Config-LotusNotes-0.30/demo/FindNotes.pl'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 'Config-LotusNotes-0.30/lib/'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 'Config-LotusNotes-0.30/lib/Config/'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 
'Config-LotusNotes-0.30/lib/Config/LotusNotes/'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 
'Config-LotusNotes-0.30/lib/Config/LotusNotes/Configuration.pm'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 
'Config-LotusNotes-0.30/lib/Config/LotusNotes.pm'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 'Config-LotusNotes-0.30/Makefile.PL'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 'Config-LotusNotes-0.30/MANIFEST'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 'Config-LotusNotes-0.30/META.yml'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 'Config-LotusNotes-0.30/README'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 'Config-LotusNotes-0.30/t/'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 
'Config-LotusNotes-0.30/t/Config-LotusNotes-Configuration.t'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 
'Config-LotusNotes-0.30/t/Config-LotusNotes.t'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 'Config-LotusNotes-0.30/t/data/'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 
'Config-LotusNotes-0.30/t/data/nlnotes.exe'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 
'Config-LotusNotes-0.30/t/data/notes.ini'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 
'Config-LotusNotes-0.30/t/data/nsd.exe'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 
'Config-LotusNotes-0.30/t/data/readme.txt'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 
'Config-LotusNotes-0.30/t/pod-coverage.t'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 'Config-LotusNotes-0.30/t/pod.t'
[MSG] [Tue Feb 20 23:04:04 2007] Extracted 'Config::LotusNotes' to 
'/export/home/chris/perl588/.cpanplus/5.8.8/build/Config-LotusNotes-0.30'
[MSG] [Tue Feb 20 23:04:06 2007] Checking if your kit is complete...
Looks good
Warning: prerequisite Config::IniHash 0 not found.
Warning: prerequisite Win32::TieRegistry 0 not found.
Writing Makefile for Config::LotusNotes

[MSG] [Tue Feb 20 23:04:06 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Tue Feb 20 23:04:06 2007] Module 'Config::LotusNotes' requires 
'Config::IniHash' version '0' to be installed 
[MSG] [Tue Feb 20 23:04:06 2007] Module 'Config::LotusNotes' requires 
'Win32::TieRegistry' version '0' to be installed 
[MSG] [Tue Feb 20 23:04:06 2007] Trying to get 
'http://www.cpan.org/authors/id/J/JE/JENDA/Config-IniHash-2.8.tar.gz'
[MSG] [Tue Feb 20 23:04:07 2007] Trying to get 
'http://www.cpan.org/authors/id/J/JE/JENDA/CHECKSUMS'
[MSG] [Tue Feb 20 23:04:08 2007] Checksum matches for 
'Config-IniHash-2.8.tar.gz'
[MSG] [Tue Feb 20 23:04:08 2007] Extracted 'Config-IniHash-2.8/'
[MSG] [Tue Feb 20 23:04:08 2007] Extracted 'Config-IniHash-2.8/Changes'
[MSG] [Tue Feb 20 23:04:08 2007] Extracted 'Config-IniHash-2.8/IniHash.pm'
[MSG] [Tue Feb 20 23:04:08 2007] Extracted 'Config-IniHash-2.8/Makefile.PL'
[MSG] [Tue Feb 20 23:04:08 2007] Extracted 'Config-IniHash-2.8/MANIFEST'
[MSG] [Tue Feb 20 23:04:08 2007] Extracted 'Config-IniHash-2.8/README'
[MSG] [Tue Feb 20 23:04:08 2007] Extracted 'Config-IniHash-2.8/test.pl'
[MSG] [Tue Feb 20 23:04:08 2007] Extracted 'Config::IniHash' to 
'/export/home/chris/perl588/.cpanplus/5.8.8/build/Config-IniHash-2.8'
[MSG] [Tue Feb 20 23:04:10 2007] Checking if your kit is complete...
Looks good
Warning: prerequisite Hash::Case 0 not found.
Warning: prerequisite Hash::WithDefaults 0.04 not found.
Writing Makefile for Config::IniHash

[MSG] [Tue Feb 20 23:04:10 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Tue Feb 20 23:04:10 2007] Module 'Config::IniHash' requires 'Hash::Case' 
version '0' to be installed 
[MSG] [Tue Feb 20 23:04:11 2007] Module 'Config::IniHash' requires 
'Hash::WithDefaults' version '0.04' to be installed 
[MSG] [Tue Feb 20 23:04:11 2007] Trying to get 
'http://www.cpan.org/authors/id/M/MA/MARKOV/Hash-Case-1.003.tar.gz'
[MSG] [Tue Feb 20 23:04:11 2007] Trying to get 
'http://www.cpan.org/authors/id/M/MA/MARKOV/CHECKSUMS'
[MSG] [Tue Feb 20 23:04:12 2007] Checksum matches for 'Hash-Case-1.003.tar.gz'
[MSG] [Tue Feb 20 23:04:13 2007] Extracted 'Hash-Case-1.003/'
[MSG] [Tue Feb 20 23:04:13 2007] Extracted 'Hash-Case-1.003/t/'
[MSG] [Tue Feb 20 23:04:13 2007] Extracted 'Hash-Case-1.003/t/30pres1.t'
[MSG] [Tue Feb 20 23:04:13 2007] Extracted 'Hash-Case-1.003/t/20upper.t'
[MSG] [Tue Feb 20 23:04:13 2007] Extracted 'Hash-Case-1.003/t/10lower.t'
[MSG] [Tue Feb 20 23:04:13 2007] Extracted 'Hash-Case-1.003/t/31pres2.t'
[MSG] [Tue Feb 20 23:04:13 2007] Extracted 'Hash-Case-1.003/lib/'
[MSG] [Tue Feb 20 23:04:13 2007] Extracted 'Hash-Case-1.003/lib/Hash/'
[MSG] [Tue Feb 20 23:04:13 2007] Extracted 'Hash-Case-1.003/lib/Hash/Case/'
[MSG] [Tue Feb 20 23:04:13 2007] Extracted 
'Hash-Case-1.003/lib/Hash/Case/Upper.pm'
[MSG] [Tue Feb 20 23:04:13 2007] Extracted 
'Hash-Case-1.003/lib/Hash/Case/Lower.pm'
[MSG] [Tue Feb 20 23:04:13 2007] Extracted 
'Hash-Case-1.003/lib/Hash/Case/Preserve.pm'
[MSG] [Tue Feb 20 23:04:13 2007] Extracted 'Hash-Case-1.003/lib/Hash/Case.pm'
[MSG] [Tue Feb 20 23:04:13 2007] Extracted 
'Hash-Case-1.003/lib/Hash/Makefile.PL'
[MSG] [Tue Feb 20 23:04:13 2007] Extracted 'Hash-Case-1.003/Makefile.PL'
[MSG] [Tue Feb 20 23:04:13 2007] Extracted 'Hash-Case-1.003/ChangeLog'
[MSG] [Tue Feb 20 23:04:13 2007] Extracted 'Hash-Case-1.003/MANIFEST'
[MSG] [Tue Feb 20 23:04:13 2007] Extracted 'Hash::Case' to 
'/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-Case-1.003'
[MSG] [Tue Feb 20 23:04:15 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Hash::Case

[MSG] [Tue Feb 20 23:04:15 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Tue Feb 20 23:04:20 2007] cp lib/Hash/Case.pm blib/lib/Hash/Case.pm
cp lib/Hash/Case/Lower.pm blib/lib/Hash/Case/Lower.pm
cp lib/Hash/Case/Preserve.pm blib/lib/Hash/Case/Preserve.pm
cp lib/Hash/Case/Upper.pm blib/lib/Hash/Case/Upper.pm
cp lib/Hash/Makefile.PL blib/lib/Hash/Makefile.PL
Manifying blib/man3/Hash::Case.3
Manifying blib/man3/Hash::Case::Lower.3
Manifying blib/man3/Hash::Case::Preserve.3
Manifying blib/man3/Hash::Case::Upper.3

[MSG] [Tue Feb 20 23:04:23 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 
/export/home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" 
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/10lower....ok
t/20upper....ok
t/30pres1....ok
t/31pres2....ok
All tests successful.
Files=4, Tests=136,  2 wallclock secs ( 0.96 cusr +  0.40 csys =  1.36 CPU)

[MSG] [Tue Feb 20 23:06:36 2007] Successfully sent 'pass' report for 
'Hash-Case-1.003'
[MSG] [Tue Feb 20 23:06:36 2007] Trying to get 
'http://www.cpan.org/authors/id/J/JE/JENDA/Hash-WithDefaults-0.04.tar.gz'
[MSG] [Tue Feb 20 23:06:37 2007] Trying to get 
'http://www.cpan.org/authors/id/J/JE/JENDA/CHECKSUMS'
[MSG] [Tue Feb 20 23:06:37 2007] Checksum matches for 
'Hash-WithDefaults-0.04.tar.gz'
[MSG] [Tue Feb 20 23:06:38 2007] Extracted 'Hash-WithDefaults-0.04/'
[MSG] [Tue Feb 20 23:06:38 2007] Extracted 'Hash-WithDefaults-0.04/Changes'
[MSG] [Tue Feb 20 23:06:38 2007] Extracted 'Hash-WithDefaults-0.04/Makefile.PL'
[MSG] [Tue Feb 20 23:06:38 2007] Extracted 'Hash-WithDefaults-0.04/MANIFEST'
[MSG] [Tue Feb 20 23:06:38 2007] Extracted 'Hash-WithDefaults-0.04/README'
[MSG] [Tue Feb 20 23:06:38 2007] Extracted 'Hash-WithDefaults-0.04/test.pl'
[MSG] [Tue Feb 20 23:06:38 2007] Extracted 
'Hash-WithDefaults-0.04/WithDefaults.pm'
[MSG] [Tue Feb 20 23:06:38 2007] Extracted 'Hash::WithDefaults' to 
'/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-WithDefaults-0.04'
[MSG] [Tue Feb 20 23:06:40 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Hash::WithDefaults

[MSG] [Tue Feb 20 23:06:40 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Tue Feb 20 23:06:44 2007] cp WithDefaults.pm 
blib/lib/Hash/WithDefaults.pm
Manifying blib/man3/Hash::WithDefaults.3

[MSG] [Tue Feb 20 23:06:45 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 
/export/home/chris/perl588/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
1..1
# Running under perl version 5.008008 for solaris
# Current time local: Tue Feb 20 23:06:44 2007
# Current time GMT:   Tue Feb 20 23:06:44 2007
# Using Test.pm version 1.25
ok 1

[MSG] [Tue Feb 20 23:06:58 2007] Successfully sent 'pass' report for 
'Hash-WithDefaults-0.04'
[MSG] [Tue Feb 20 23:07:02 2007] cp IniHash.pm blib/lib/Config/IniHash.pm
Manifying blib/man3/Config::IniHash.3

[ERROR] [Tue Feb 20 23:07:03 2007] MAKE TEST failed: Illegal seek 
PERL_DL_NONLAZY=1 /export/home/chris/perl588/bin/perl "-Iblib/lib" 
"-Iblib/arch" test.pl
1..4
not ok 1 - use Config::IniHash;
#   Failed test 'use Config::IniHash;'
#   at test.pl line 9.
#     Tried to use 'Config::IniHash'.
#     Error:  Can't locate IO/Scalar.pm in @INC (@INC contains: blib/lib 
blib/arch 
/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-Case-1.003/blib/lib 
/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-Case-1.003/blib/arch 
/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-Case-1.003/blib 
/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-Case-1.003/blib/lib 
/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-Case-1.003/blib/arch 
/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-Case-1.003/blib 
/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-WithDefaults-0.04/blib/lib
 
/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-WithDefaults-0.04/blib/arch
 /export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-WithDefaults-0.04/blib 
/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-WithDefaults-0.04/blib/lib
 
/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-WithDefaults-0.04/blib/arch
 /export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-WithDefaults-0.04/blib 
/export/home/chris/perl588/.cpanplus/5.8.8/build/Config-IniHash-2.8/blib/lib 
/export/home/chris/perl588/.cpanplus/5.8.8/build/Config-IniHash-2.8/blib/arch 
/export/home/chris/perl588/.cpanplus/5.8.8/build/Config-IniHash-2.8/blib 
/export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int 
/export/home/chris/perl588/lib/5.8.8 
/export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int 
/export/home/chris/perl588/lib/site_perl/5.8.8 
/export/home/chris/perl588/lib/site_perl .) at blib/lib/Config/IniHash.pm line 
6.
# BEGIN failed--compilation aborted at test.pl line 9.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Undefined subroutine &main::WriteINI called at test.pl line 23.
# Looks like you planned 4 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
*** Error code 255
make: Fatal error: Command failed for target `test_dynamic'



MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

IO::Scalar

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'Jan Krynicky ([EMAIL PROTECTED])',
    ... # other information
    PREREQ_PM   => {
        'IO::Scalar'    => '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
        Hash::Case                        1.003
        Hash::WithDefaults                 0.04

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = C
    PATH = 
/export/home/chris/perl/bin:/usr/sfw/bin:/usr/ccs/bin:/usr/local/bin:/usr/bin:
    PERL5LIB = 
:/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-Case-1.003/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-Case-1.003/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-Case-1.003/blib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-Case-1.003/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-Case-1.003/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-Case-1.003/blib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-WithDefaults-0.04/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-WithDefaults-0.04/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-WithDefaults-0.04/blib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-WithDefaults-0.04/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-WithDefaults-0.04/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/Hash-WithDefaults-0.04/blib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Config-IniHash-2.8/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Config-IniHash-2.8/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/Config-IniHash-2.8/blib
    PERL5_CPANPLUS_IS_RUNNING = 2437
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /export/home/chris/perl588/bin/perl
    UID:  $<  = 100
    EUID: $>  = 100
    GID:  $(  = 1 1
    EGID: $)  = 1 1


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=solaris, osvers=2.10, archname=i86pc-solaris-thread-multi-64int
    uname='sunos soleil 5.10 generic_118855-33 i86pc i386 i86pc '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define 
usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -fno-strict-aliasing -pipe 
-Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE 
-D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV 
-DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV',
    optimize='-O',
    cppflags='-D_REENTRANT -fno-strict-aliasing -pipe 
-Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='3.4.3 (csl-sol210-3_4-branch+sol_rpath)', 
gccosandvers='solaris2.10'
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', 
lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib '
    libpth=/usr/local/lib /usr/lib /usr/ccs/lib
    libs=-lsocket -lnsl -ldl -lm -lpthread -lc
    perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc
    libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='  -R 
/export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/CORE'
    cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'

Reply via email to