This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear ERWAN, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Tue Feb 27 02:22:04 2007] Trying to get 'http://www.cpan.org/authors/id/E/ER/ERWAN/Math-Polynom-0.06.tar.gz' [MSG] [Tue Feb 27 02:22:05 2007] Trying to get 'http://www.cpan.org/authors/id/E/ER/ERWAN/CHECKSUMS' [MSG] [Tue Feb 27 02:22:06 2007] Checksum matches for 'Math-Polynom-0.06.tar.gz' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/t/' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/t/01_test_compile.t' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/t/05_test_negate.t' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/t/08_test_minus.t' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/t/12_test_newton_raphson.t' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/t/07_test_add.t' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/t/04_test_clone.t' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/t/03_test_stringify.t' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/t/06_test_eval.t' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/t/09_test_multiply.t' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/t/pod-coverage.t' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/t/20_test__is_nan.t' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/t/13_test_error_codes.t' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/t/02_test_new.t' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/t/pod.t' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/t/15_test_brent.t' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/t/10_test_divide.t' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/t/14_test_secant.t' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/t/11_test_derivate.t' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/Changes' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/MANIFEST' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/META.yml' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/lib/' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/lib/Math/' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/lib/Math/Polynom.pm' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/README' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math-Polynom-0.06/Makefile.PL' [MSG] [Tue Feb 27 02:22:07 2007] Extracted 'Math::Polynom' to '/export/home/chris/perl588/.cpanplus/5.8.8/build/Math-Polynom-0.06' [MSG] [Tue Feb 27 02:22:10 2007] Checking if your kit is complete... Looks good Warning: prerequisite accessors 0 not found. Writing Makefile for Math::Polynom [MSG] [Tue Feb 27 02:22:10 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Tue Feb 27 02:22:10 2007] Module 'Math::Polynom' requires 'accessors' version '0' to be installed [MSG] [Tue Feb 27 02:22:10 2007] Trying to get 'http://www.cpan.org/authors/id/S/SP/SPURKIS/CHECKSUMS' [MSG] [Tue Feb 27 02:22:11 2007] Checksum matches for 'accessors-0.02.tar.gz' [MSG] [Tue Feb 27 02:22:11 2007] Extracted 'accessors-0.02' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/Build.PL' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/Changes' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/INSTALL' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/lib' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/lib/accessors' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/lib/accessors/chained.pm' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/lib/accessors/classic.pm' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/lib/accessors.pm' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/Makefile.PL' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/MANIFEST' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/MANIFEST.SKIP' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/META.yml' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/README' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/t' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/t/01__basic.t' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/t/02__chaining.t' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/t/03__classic.t' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/t/04__invalid.t' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/t/05__default.t' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/t/Benchmark.pm' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors-0.02/TODO' [MSG] [Tue Feb 27 02:22:12 2007] Extracted 'accessors' to '/export/home/chris/perl588/.cpanplus/5.8.8/build/accessors-0.02' [MSG] [Tue Feb 27 02:22:13 2007] 'Makefile' already exists, not running '/export/home/chris/perl588/bin/perl Makefile.PL' again unless you force [MSG] [Tue Feb 27 02:22:13 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Tue Feb 27 02:22:13 2007] Already ran '/usr/ccs/bin/make' for this module [accessors] -- not running again unless you force [MSG] [Tue Feb 27 02:22:35 2007] MAKE TEST passed: /export/home/chris/perl588/bin/perl Build --makefile_env_macros 1 test t/01__basic.......ok t/02__chaining....ok t/03__classic.....ok t/04__invalid.....ok t/05__default.....ok All tests successful. Files=5, Tests=36, 20 wallclock secs (18.54 cusr + 0.88 csys = 19.42 CPU) [MSG] [Tue Feb 27 02:22:36 2007] Ok, not sending test report [MSG] [Tue Feb 27 02:22:40 2007] cp lib/Math/Polynom.pm blib/lib/Math/Polynom.pm Manifying blib/man3/Math::Polynom.3 [ERROR] [Tue Feb 27 02:22:52 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /export/home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/01_test_compile...........ok t/02_test_new...............ok t/03_test_stringify.........ok t/04_test_clone.............ok t/05_test_negate............ok t/06_test_eval.............. # Failed test 'eval(-5) on [3*x^2 + 5.2*x^0.5]' # at t/06_test_eval.t line 20. # got: '-NaN' # expected: 'nan' # Looks like you failed 1 test of 54. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 29 Failed 1/54 tests, 98.15% okay t/07_test_add...............ok t/08_test_minus.............ok t/09_test_multiply..........ok t/10_test_divide............ok t/11_test_derivate..........ok t/12_test_newton_raphson.... # Failed test 'newton_raphson() fails on $p2 with negative guess' # at t/12_test_newton_raphson.t line 43. Use of uninitialized value in pattern match (m//) at t/12_test_newton_raphson.t line 44. # Failed test '$p2->error_message looks good' # at t/12_test_newton_raphson.t line 44. # Failed test '$p2->error looks good' # at t/12_test_newton_raphson.t line 45. # got: '0' # expected: '1' # Looks like you failed 3 tests of 26. dubious Test returned status 3 (wstat 768, 0x300) DIED. FAILED tests 10-12 Failed 3/26 tests, 88.46% okay t/13_test_error_codes.......ok t/14_test_secant............ # Failed test 'secant() fails on polynom 2*x^0.2 - 1' # at t/14_test_secant.t line 74. Use of uninitialized value in pattern match (m//) at t/14_test_secant.t line 75. # Failed test '$p5->error_message looks good' # at t/14_test_secant.t line 75. # Failed test '$p5->error looks good' # at t/14_test_secant.t line 76. # got: '0' # expected: '1' # Looks like you failed 3 tests of 37. dubious Test returned status 3 (wstat 768, 0x300) DIED. FAILED tests 25-27 Failed 3/37 tests, 91.89% okay t/15_test_brent.............ok t/20_test__is_nan...........ok t/pod-coverage..............skipped all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage t/pod.......................skipped all skipped: Test::Pod 1.14 required for testing POD Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/06_test_eval.t 1 256 54 1 29 t/12_test_newton_raphson.t 3 768 26 3 10-12 t/14_test_secant.t 3 768 37 3 25-27 2 tests skipped. Failed 3/18 test scripts. 7/273 subtests failed. Files=18, Tests=273, 10 wallclock secs ( 5.65 cusr + 2.08 csys = 7.73 CPU) Failed 3/18 test programs. 7/273 subtests failed. *** Error code 29 make: Fatal error: Command failed for target `test_dynamic' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Carp 1.04 Data::Dumper 2.121_08 accessors 0.02 constant 1.05 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = C PATH = /export/home/chris/perl/bin:/usr/sfw/bin:/usr/ccs/bin:/usr/local/bin:/usr/bin: PERL5LIB = :/export/home/chris/perl588/.cpanplus/5.8.8/build/accessors-0.02/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/accessors-0.02/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/accessors-0.02/blib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Math-Polynom-0.06/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Math-Polynom-0.06/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/Math-Polynom-0.06/blib PERL5_CPANPLUS_IS_RUNNING = 17745 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /export/home/chris/perl588/bin/perl UID: $< = 100 EUID: $> = 100 GID: $( = 1 1 EGID: $) = 1 1 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=solaris, osvers=2.10, archname=i86pc-solaris-thread-multi-64int uname='sunos soleil 5.10 generic_118855-33 i86pc i386 i86pc ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV', optimize='-O', cppflags='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.3 (csl-sol210-3_4-branch+sol_rpath)', gccosandvers='solaris2.10' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib ' libpth=/usr/local/lib /usr/lib /usr/ccs/lib libs=-lsocket -lnsl -ldl -lm -lpthread -lc perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -R /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/CORE' cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
