This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear RIZEN, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Thu Mar 1 08:04:43 2007] Trying to get 'http://www.cpan.org/authors/id/R/RI/RIZEN/Config-JSON-1.0.0.tar.gz' [MSG] [Thu Mar 1 08:04:44 2007] Trying to get 'http://www.cpan.org/authors/id/R/RI/RIZEN/CHECKSUMS' [MSG] [Thu Mar 1 08:04:44 2007] Checksum matches for 'Config-JSON-1.0.0.tar.gz' [MSG] [Thu Mar 1 08:04:45 2007] Extracted 'Config-JSON' [MSG] [Thu Mar 1 08:04:45 2007] Extracted 'Config-JSON/.cvsignore' [MSG] [Thu Mar 1 08:04:45 2007] Extracted 'Config-JSON/Changes' [MSG] [Thu Mar 1 08:04:45 2007] Extracted 'Config-JSON/lib' [MSG] [Thu Mar 1 08:04:45 2007] Extracted 'Config-JSON/lib/Config' [MSG] [Thu Mar 1 08:04:45 2007] Extracted 'Config-JSON/lib/Config/JSON.pm' [MSG] [Thu Mar 1 08:04:45 2007] Extracted 'Config-JSON/Makefile.PL' [MSG] [Thu Mar 1 08:04:45 2007] Extracted 'Config-JSON/MANIFEST' [MSG] [Thu Mar 1 08:04:45 2007] Extracted 'Config-JSON/README' [MSG] [Thu Mar 1 08:04:45 2007] Extracted 'Config-JSON/t' [MSG] [Thu Mar 1 08:04:45 2007] Extracted 'Config-JSON/t/00.load.t' [MSG] [Thu Mar 1 08:04:45 2007] Extracted 'Config-JSON/t/Config.t' [MSG] [Thu Mar 1 08:04:45 2007] Extracted 'Config-JSON/t/perlcritic.t' [MSG] [Thu Mar 1 08:04:45 2007] Extracted 'Config-JSON/t/pod-coverage.t' [MSG] [Thu Mar 1 08:04:45 2007] Extracted 'Config-JSON/t/pod.t' [MSG] [Thu Mar 1 08:04:45 2007] Extracted 'Config::JSON' to '/home/cpan/.cpanplus/5.8.8/build/Config-JSON' [MSG] [Thu Mar 1 08:04:47 2007] Checking if your kit is complete... Warning: the following files are missing in your kit: META.yml Please inform the author. Warning: prerequisite JSON 0 not found. WARNING: Setting VERSION via file 'lib/Config/JSON.pm' failed at /home/cpan/perl588/lib/5.8.8/ExtUtils/MakeMaker.pm line 501 Writing Makefile for Config::JSON [MSG] [Thu Mar 1 08:04:47 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Mar 1 08:04:47 2007] Module 'Config::JSON' requires 'JSON' version '0' to be installed [MSG] [Thu Mar 1 08:04:47 2007] Trying to get 'http://www.cpan.org/authors/id/M/MA/MAKAMAKA/CHECKSUMS' [MSG] [Thu Mar 1 08:04:48 2007] Checksum matches for 'JSON-1.07.tar.gz' [MSG] [Thu Mar 1 08:04:48 2007] Extracted 'JSON-1.07' [MSG] [Thu Mar 1 08:04:48 2007] Extracted 'JSON-1.07/Changes' [MSG] [Thu Mar 1 08:04:48 2007] Extracted 'JSON-1.07/lib' [MSG] [Thu Mar 1 08:04:48 2007] Extracted 'JSON-1.07/lib/Apache' [MSG] [Thu Mar 1 08:04:48 2007] Extracted 'JSON-1.07/lib/Apache/JSONRPC.pm' [MSG] [Thu Mar 1 08:04:48 2007] Extracted 'JSON-1.07/lib/JSON' [MSG] [Thu Mar 1 08:04:48 2007] Extracted 'JSON-1.07/lib/JSON/Converter.pm' [MSG] [Thu Mar 1 08:04:48 2007] Extracted 'JSON-1.07/lib/JSON/Parser.pm' [MSG] [Thu Mar 1 08:04:48 2007] Extracted 'JSON-1.07/lib/JSON.pm' [MSG] [Thu Mar 1 08:04:48 2007] Extracted 'JSON-1.07/lib/JSONRPC' [MSG] [Thu Mar 1 08:04:48 2007] Extracted 'JSON-1.07/lib/JSONRPC/Transport' [MSG] [Thu Mar 1 08:04:48 2007] Extracted 'JSON-1.07/lib/JSONRPC/Transport/HTTP.pm' [MSG] [Thu Mar 1 08:04:48 2007] Extracted 'JSON-1.07/lib/JSONRPC.pm' [MSG] [Thu Mar 1 08:04:48 2007] Extracted 'JSON-1.07/Makefile.PL' [MSG] [Thu Mar 1 08:04:48 2007] Extracted 'JSON-1.07/MANIFEST' [MSG] [Thu Mar 1 08:04:48 2007] Extracted 'JSON-1.07/META.yml' [MSG] [Thu Mar 1 08:04:48 2007] Extracted 'JSON-1.07/README' [MSG] [Thu Mar 1 08:04:48 2007] Extracted 'JSON-1.07/t' [MSG] [Thu Mar 1 08:04:48 2007] Extracted 'JSON-1.07/t/01-use.t' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/02-base.t' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/03-circleref.t' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/04-autoconv.t' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/05-esc.t' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/06-comment.t' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/07-extra_number.t' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/08-pretty.t' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/09-quote.t' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/10-ordered.t' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/11-convblessed.t' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/12-selfconv.t' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/13-expo.t' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/14-utf8.t' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/15-singlequote.t' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/MyApp' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/MyApp/Test.pm' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/MyApp/Test2.pm' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/rpc01-use.t' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/rpc02-query.t' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/rpc03-query2.t' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON-1.07/t/rpc04-json_opt.t' [MSG] [Thu Mar 1 08:04:49 2007] Extracted 'JSON' to '/home/cpan/.cpanplus/5.8.8/build/JSON-1.07' [MSG] [Thu Mar 1 08:04:49 2007] 'Makefile' already exists, not running '/home/cpan/perl588/bin/perl Makefile.PL' again unless you force [MSG] [Thu Mar 1 08:04:49 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Mar 1 08:04:49 2007] Already ran '/usr/pkg/bin/gmake' for this module [JSON] -- not running again unless you force [MSG] [Thu Mar 1 08:04:59 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/01-use.............ok t/02-base............ok t/03-circleref.......ok t/04-autoconv........ok t/05-esc.............ok t/06-comment.........ok t/07-extra_number....ok t/08-pretty..........ok t/09-quote...........ok t/10-ordered.........ok t/11-convblessed.....ok t/12-selfconv........ok t/13-expo............ok t/14-utf8............ok t/15-singlequote.....ok t/rpc01-use..........ok t/rpc02-query........ok t/rpc03-query2.......ok t/rpc04-json_opt.....ok All tests successful. Files=19, Tests=342, 9 wallclock secs ( 4.41 cusr + 0.52 csys = 4.93 CPU) [MSG] [Thu Mar 1 08:04:59 2007] Ok, not sending test report [MSG] [Thu Mar 1 08:05:01 2007] cp lib/Config/JSON.pm blib/lib/Config/JSON.pm Manifying blib/man3/Config::JSON.3 [ERROR] [Thu Mar 1 08:05:02 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00.load.........Use of uninitialized value in concatenation (.) or string at t/00.load.t line 6. # Testing Config::JSON ok t/Config..........Can't locate Test/Deep.pm in @INC (@INC contains: ../lib /home/cpan/.cpanplus/5.8.8/build/Config-JSON/blib/lib /home/cpan/.cpanplus/5.8.8/build/Config-JSON/blib/arch /home/cpan/.cpanplus/5.8.8/build/JSON-1.07/blib/lib /home/cpan/.cpanplus/5.8.8/build/JSON-1.07/blib/arch /home/cpan/.cpanplus/5.8.8/build/JSON-1.07/blib /home/cpan/.cpanplus/5.8.8/build/Config-JSON/blib /home/cpan/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at t/Config.t line 4. BEGIN failed--compilation aborted at t/Config.t line 4. # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-12 Failed 12/12 tests, 0.00% okay t/perlcritic......Can't locate Test/Perl/Critic.pm in @INC (@INC contains: /home/cpan/.cpanplus/5.8.8/build/Config-JSON/blib/lib /home/cpan/.cpanplus/5.8.8/build/Config-JSON/blib/arch /home/cpan/.cpanplus/5.8.8/build/JSON-1.07/blib/lib /home/cpan/.cpanplus/5.8.8/build/JSON-1.07/blib/arch /home/cpan/.cpanplus/5.8.8/build/JSON-1.07/blib /home/cpan/.cpanplus/5.8.8/build/Config-JSON/blib /home/cpan/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl . /home/cpan/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at t/perlcritic.t line 3. dubious Test returned status 2 (wstat 512, 0x200) t/pod-coverage....skipped all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage t/pod.............skipped all skipped: Test::Pod 1.14 required for testing POD Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/Config.t 255 65280 12 24 1-12 t/perlcritic.t 2 512 ?? ?? ?? 2 tests skipped. Failed 2/5 test scripts. 12/13 subtests failed. Files=5, Tests=13, 1 wallclock secs ( 0.48 cusr + 0.12 csys = 0.60 CPU) Failed 2/5 test programs. 12/13 subtests failed. gmake: MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Test::Deep Test::Perl::Critic As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'RIZEN ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Test::Deep' => '0', # or a minimum working version 'Test::Perl::Critic' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: JSON 1.07 List::Util 1.19 Test::More 0.67 version 0.70 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin PERL5LIB = :/home/cpan/.cpanplus/5.8.8/build/JSON-1.07/blib/lib:/home/cpan/.cpanplus/5.8.8/build/JSON-1.07/blib/arch:/home/cpan/.cpanplus/5.8.8/build/JSON-1.07/blib:/home/cpan/.cpanplus/5.8.8/build/Config-JSON/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Config-JSON/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Config-JSON/blib PERL5_CPANPLUS_IS_RUNNING = 6073 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/pkg/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl588/bin/perl UID: $< = 1002 EUID: $> = 1002 GID: $( = 100 100 EGID: $) = 100 100 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0: tue oct 31 04:32:05 utc 2006 [EMAIL PROTECTED]:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop i386 ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include', optimize='-O', cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include' ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib' libpth=/usr/pkg/lib /lib /usr/lib libs=-lm -lcrypt -lutil -lc -lposix -lpthread perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-R/home/cpan/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int/CORE' cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
