This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.
        
--

Dear MAHITO,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.076. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Thu Mar  1 13:48:31 2007] Trying to get 
'http://www.cpan.org/authors/id/M/MA/MAHITO/Authen-GoogleAccount-0.02.tar.gz'
[MSG] [Thu Mar  1 13:48:32 2007] Trying to get 
'http://www.cpan.org/authors/id/M/MA/MAHITO/CHECKSUMS'
[MSG] [Thu Mar  1 13:48:32 2007] Checksum matches for 
'Authen-GoogleAccount-0.02.tar.gz'
[MSG] [Thu Mar  1 13:48:33 2007] Extracted 'Authen-GoogleAccount-0.02'
[MSG] [Thu Mar  1 13:48:33 2007] Extracted 'Authen-GoogleAccount-0.02/t'
[MSG] [Thu Mar  1 13:48:33 2007] Extracted 'Authen-GoogleAccount-0.02/t/pod.t'
[MSG] [Thu Mar  1 13:48:33 2007] Extracted 
'Authen-GoogleAccount-0.02/t/boilerplate.t'
[MSG] [Thu Mar  1 13:48:33 2007] Extracted 
'Authen-GoogleAccount-0.02/t/00-load.t'
[MSG] [Thu Mar  1 13:48:33 2007] Extracted 
'Authen-GoogleAccount-0.02/t/pod-coverage.t'
[MSG] [Thu Mar  1 13:48:33 2007] Extracted 'Authen-GoogleAccount-0.02/lib'
[MSG] [Thu Mar  1 13:48:33 2007] Extracted 
'Authen-GoogleAccount-0.02/lib/Authen'
[MSG] [Thu Mar  1 13:48:34 2007] Extracted 
'Authen-GoogleAccount-0.02/lib/Authen/GoogleAccount.pm'
[MSG] [Thu Mar  1 13:48:34 2007] Extracted 'Authen-GoogleAccount-0.02/README'
[MSG] [Thu Mar  1 13:48:34 2007] Extracted 'Authen-GoogleAccount-0.02/Changes'
[MSG] [Thu Mar  1 13:48:34 2007] Extracted 
'Authen-GoogleAccount-0.02/Makefile.PL'
[MSG] [Thu Mar  1 13:48:34 2007] Extracted 'Authen-GoogleAccount-0.02/META.yml'
[MSG] [Thu Mar  1 13:48:34 2007] Extracted 
'Authen-GoogleAccount-0.02/.cvsignore'
[MSG] [Thu Mar  1 13:48:34 2007] Extracted 'Authen-GoogleAccount-0.02/MANIFEST'
[MSG] [Thu Mar  1 13:48:34 2007] Extracted 'Authen::GoogleAccount' to 
'/home/chris/.cpanplus/5.8.8/build/Authen-GoogleAccount-0.02'
[MSG] [Thu Mar  1 13:48:36 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Authen::GoogleAccount

[MSG] [Thu Mar  1 13:48:37 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Thu Mar  1 13:48:40 2007] cp lib/Authen/GoogleAccount.pm 
blib/lib/Authen/GoogleAccount.pm

[ERROR] [Thu Mar  1 13:48:44 2007] MAKE TEST failed:  PERL_DL_NONLAZY=1 
/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 
'blib/arch')" t/*.t
t/00-load.........
#   Failed test 'use Authen::GoogleAccount;'
#   at t/00-load.t line 6.
#     Tried to use 'Authen::GoogleAccount'.
#     Error:  Base class package "Class::Accessor::Fast" is empty.
#     (Perhaps you need to 'use' the module which defines that package first.)
#  at 
/home/chris/.cpanplus/5.8.8/build/Authen-GoogleAccount-0.02/blib/lib/Authen/GoogleAccount.pm
 line 167
# BEGIN failed--compilation aborted at t/00-load.t line 6.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Use of uninitialized value in concatenation (.) or string at t/00-load.t line 9.
# Testing Authen::GoogleAccount , Perl 5.008008, /usr/bin/perl
# Looks like you failed 1 test of 1.
dubious
        Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 1
        Failed 1/1 tests, 0.00% okay
t/boilerplate.....ok
t/pod-coverage....skipped
        all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.............skipped
        all skipped: Test::Pod 1.14 required for testing POD
Failed Test Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/00-load.t    1   256     1    1  1
2 tests skipped.
Failed 1/4 test scripts. 1/4 subtests failed.
Files=4, Tests=4,  3 wallclock secs ( 0.78 cusr +  1.27 csys =  2.05 CPU)
Failed 1/4 test programs. 1/4 subtests failed.
*** Error code 25

Stop in /home/chris/.cpanplus/5.8.8/build/Authen-GoogleAccount-0.02 (line 758 
of Makefile).


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
        Test::More                         0.67

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = 
/home/chris/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
    PERL5LIB = 
:/home/chris/.cpanplus/5.8.8/build/Authen-GoogleAccount-0.02/blib/lib:/home/chris/.cpanplus/5.8.8/build/Authen-GoogleAccount-0.02/blib/arch:/home/chris/.cpanplus/5.8.8/build/Authen-GoogleAccount-0.02/blib
    PERL5_CPANPLUS_IS_RUNNING = 8846
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/ksh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /usr/bin/perl
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 1000 0 1000
    EGID: $)  = 1000 0 1000


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=openbsd, osvers=4.0, archname=i386-openbsd
    uname='openbsd'
    config_args='-dsE -Dopenbsd_distribution=defined'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=undef use5005threads=undef useithreads=undef 
usemultiplicity=undef
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -fno-delete-null-pointer-checks 
-pipe -I/usr/local/include',
    optimize='-O2',
    cppflags='-fno-strict-aliasing -fno-delete-null-pointer-checks -pipe 
-I/usr/local/include'
    ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.0'
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', 
lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags ='-Wl,-E '
    libpth=/usr/lib
    libs=-lm -lutil -lc
    perllibs=-lm -lutil -lc
    libc=/usr/lib/libc.a, so=so, useshrplib=true, libperl=libperl.so.10.1
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, 
ccdlflags='-Wl,-R/usr/libdata/perl5/i386-openbsd/5.8.8/CORE'
    cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC '

Reply via email to