This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear TLINDEN, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Fri Mar 2 09:35:00 2007] Trying to get 'http://www.cpan.org/authors/id/T/TL/TLINDEN/Pod-AxPoint-0.02.tar.gz' [MSG] [Fri Mar 2 09:35:01 2007] Trying to get 'http://www.cpan.org/authors/id/T/TL/TLINDEN/CHECKSUMS' [MSG] [Fri Mar 2 09:35:02 2007] Checksum matches for 'Pod-AxPoint-0.02.tar.gz' [MSG] [Fri Mar 2 09:35:02 2007] Extracted 'Pod-AxPoint-0.02/' [MSG] [Fri Mar 2 09:35:02 2007] Extracted 'Pod-AxPoint-0.02/Makefile.PL' [MSG] [Fri Mar 2 09:35:02 2007] Extracted 'Pod-AxPoint-0.02/example.pdf' [MSG] [Fri Mar 2 09:35:02 2007] Extracted 'Pod-AxPoint-0.02/example.pod' [MSG] [Fri Mar 2 09:35:02 2007] Extracted 'Pod-AxPoint-0.02/pod2axpoint' [MSG] [Fri Mar 2 09:35:02 2007] Extracted 'Pod-AxPoint-0.02/t/' [MSG] [Fri Mar 2 09:35:02 2007] Extracted 'Pod-AxPoint-0.02/t/run.t' [MSG] [Fri Mar 2 09:35:02 2007] Extracted 'Pod-AxPoint-0.02/t/test.pod' [MSG] [Fri Mar 2 09:35:03 2007] Extracted 'Pod-AxPoint-0.02/CHANGELOG' [MSG] [Fri Mar 2 09:35:03 2007] Extracted 'Pod-AxPoint-0.02/MANIFEST' [MSG] [Fri Mar 2 09:35:03 2007] Extracted 'Pod::AxPoint' to '/export/home/chris/perl588/.cpanplus/5.8.8/build/Pod-AxPoint-0.02' [MSG] [Fri Mar 2 09:35:05 2007] Checking if your kit is complete... Looks good Writing Makefile for pod2axpoint [MSG] [Fri Mar 2 09:35:05 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Mar 2 09:35:10 2007] cp example.pod blib/lib/example.pod cp pod2axpoint blib/script/pod2axpoint /export/home/chris/perl588/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/pod2axpoint Manifying blib/man1/pod2axpoint.1 Manifying blib/man3/example.3 [ERROR] [Fri Mar 2 09:35:12 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /export/home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/run.... Can't load '/export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/auto/Data/Dumper/Dumper.so' for module Data::Dumper: ld.so.1: perl: fatal: relocation error: file /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/auto/Data/Dumper/Dumper.so: symbol Perl_Tstack_sp_ptr: referenced symbol not found at /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/XSLoader.pm line 70. at /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/Data/Dumper.pm line 36 Compilation failed in require at blib/script/pod2axpoint line 9. BEGIN failed--compilation aborted at blib/script/pod2axpoint line 9. # Failed test 'Could not create slideshow: No such file or directory' # at t/run.t line 18. # Failed test 'Could not find template variables in slideshow' # at t/run.t line 42. # Looks like you failed 2 tests of 4. dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED tests 2, 4 Failed 2/4 tests, 50.00% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/run.t 2 512 4 2 2 4 Failed 1/1 test scripts. 2/4 subtests failed. Files=1, Tests=4, 1 wallclock secs ( 0.27 cusr + 0.18 csys = 0.45 CPU) Failed 1/1 test programs. 2/4 subtests failed. *** Error code 2 make: Fatal error: Command failed for target `test_dynamic' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = C PATH = /export/home/chris/perl/bin:/usr/sfw/bin:/usr/ccs/bin:/usr/local/bin:/usr/bin: PERL5LIB = :/export/home/chris/perl588/.cpanplus/5.8.8/build/Pod-AxPoint-0.02/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Pod-AxPoint-0.02/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/Pod-AxPoint-0.02/blib PERL5_CPANPLUS_IS_RUNNING = 15164 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /export/home/chris/perl588/bin/perl UID: $< = 100 EUID: $> = 100 GID: $( = 1 1 EGID: $) = 1 1 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=solaris, osvers=2.10, archname=i86pc-solaris-thread-multi-64int uname='sunos soleil 5.10 generic_118855-33 i86pc i386 i86pc ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV', optimize='-O', cppflags='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.3 (csl-sol210-3_4-branch+sol_rpath)', gccosandvers='solaris2.10' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib ' libpth=/usr/local/lib /usr/lib /usr/ccs/lib libs=-lsocket -lnsl -ldl -lm -lpthread -lc perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -R /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/CORE' cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
