This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear SEANQ, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Fri Mar 9 20:16:14 2007] Trying to get 'http://www.cpan.org/authors/id/S/SE/SEANQ/CAS-0.88.tar.gz' [MSG] [Fri Mar 9 20:16:14 2007] Trying to get 'http://www.cpan.org/authors/id/S/SE/SEANQ/CHECKSUMS' [MSG] [Fri Mar 9 20:16:14 2007] Checksum matches for 'CAS-0.88.tar.gz' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/Changes' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/Makefile.PL' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/t/' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/t/02-client.t' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/t/04-authentication.t' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/t/00-load.t' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/t/06-administration.t' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/t/boilerplate.t' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/t/pod.t' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/t/03-user.t' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/t/01-database.t' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/t/pod-coverage.t' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/t/05-authorization.t' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/CAS.sql' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/README' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/MANIFEST' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/lib/' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/lib/CAS/' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/lib/CAS/DB.pm' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/lib/CAS/Config.pm' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/lib/CAS/Messaging.pm' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/lib/CAS/User.pm' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/lib/CAS.pm' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/META.yml' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS-0.88/post_install.prl' [MSG] [Fri Mar 9 20:16:14 2007] Extracted 'CAS' to '/home/cwill1is/.cpanplus/5.8.8/build/CAS-0.88' [MSG] [Fri Mar 9 20:16:15 2007] CAS database name [CAS] CAS Host machine for database server [localhost] localhost User to log into database [CAS_query] CAS_query Password to access database [local_passwd] local_passwd default group for new users [100] 100 Debug value for this installation [0] 0 Default session timeout in seconds [900] 900 Username for primary CAS administrator [admin] admin Administrators email address [EMAIL PROTECTED] [EMAIL PROTECTED] Administrators phone # [555-1212] 555-1212 The CAS configuration file has been written. You should review the configuration file and make any edits needed. Where do you want the CAS config file installed? [/etc/] /etc/ Checking if your kit is complete... Looks good Warning: prerequisite Mail::Sendmail 0.7 not found. Writing Makefile for CAS The makefile has been generated. Please note that the CAS database must be installed and all privileges on that database granted to the user identified in the configuration file before make test or make install can be run sucessfully. If during the final installation steps the CAS core client (ID: 1) is not found in the database, that client and the administrative user will be added to the database. [MSG] [Fri Mar 9 20:16:15 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Mar 9 20:16:15 2007] Module 'CAS' requires 'Mail::Sendmail' version '0.7' to be installed [MSG] [Fri Mar 9 20:16:15 2007] Trying to get 'http://www.cpan.org/authors/id/M/MI/MIVKOVIC/CHECKSUMS' [MSG] [Fri Mar 9 20:16:15 2007] Checksum matches for 'Mail-Sendmail-0.79.tar.gz' [MSG] [Fri Mar 9 20:16:15 2007] Extracted 'Mail-Sendmail-0.79/' [MSG] [Fri Mar 9 20:16:15 2007] Extracted 'Mail-Sendmail-0.79/Todo' [MSG] [Fri Mar 9 20:16:15 2007] Extracted 'Mail-Sendmail-0.79/README' [MSG] [Fri Mar 9 20:16:15 2007] Extracted 'Mail-Sendmail-0.79/MANIFEST' [MSG] [Fri Mar 9 20:16:15 2007] Extracted 'Mail-Sendmail-0.79/test.pl' [MSG] [Fri Mar 9 20:16:15 2007] Extracted 'Mail-Sendmail-0.79/Sendmail.pm' [MSG] [Fri Mar 9 20:16:15 2007] Extracted 'Mail-Sendmail-0.79/Changes' [MSG] [Fri Mar 9 20:16:15 2007] Extracted 'Mail-Sendmail-0.79/Makefile.PL' [MSG] [Fri Mar 9 20:16:15 2007] Extracted 'Mail-Sendmail-0.79/Sendmail.html' [MSG] [Fri Mar 9 20:16:15 2007] Extracted 'Mail::Sendmail' to '/home/cwill1is/.cpanplus/5.8.8/build/Mail-Sendmail-0.79' [MSG] [Fri Mar 9 20:16:15 2007] Writing Makefile for Mail::Sendmail ********************************************************************** NOTE ---- The test (test.pl) is a real test for this module: it sends an e-mail. You may want to edit test.pl before running it (directly or through make test), so the mail is sent to you. If you also leave my address, the mail goes into a database from which I can get statistics. Read the docs, and have fun... ********************************************************************** [MSG] [Fri Mar 9 20:16:15 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Mar 9 20:16:16 2007] Manifying blib/man3/Mail::Sendmail.3 [MSG] [Fri Mar 9 20:17:32 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /usr/home/cwill1is/perl588/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl 1..2 Test Mail::Sendmail 0.79 Trying to send a message to the author (and/or whoever if you edited test.pl) (The test is designed so it can be run by Test::Harness from CPAN.pm. Edit it to send the mail to yourself for more concrete feedback. If you do this, you also need to specify a different mail server, and possibly a different From: address.) Current recipient(s): 'Sendmail Test <[EMAIL PROTECTED]>' ok 1 Server set to: mail.alma.ch Sending... content of $Mail::Sendmail::log: Mail::Sendmail v. 0.79 - Fri Mar 9 20:16:16 2007 Date: Fri, 9 Mar 2007 20:16:16 +0000 Server: localhost Port: 25 From: [EMAIL PROTECTED] Subject: Mail::Sendmail version 0.79 test To: [EMAIL PROTECTED] Result: 250 2.0.0 l29KHWNQ085958 Message accepted for delivery content of $Mail::Sendmail::error: connect to mail.alma.ch failed (Operation timed out) connect to mail.alma.ch failed ok 2 [MSG] [Fri Mar 9 20:17:32 2007] Ok, not sending test report [MSG] [Fri Mar 9 20:17:33 2007] cp lib/CAS/DB.pm blib/lib/CAS/DB.pm cp lib/CAS/User.pm blib/lib/CAS/User.pm cp lib/CAS.pm blib/lib/CAS.pm cp lib/CAS/Messaging.pm blib/lib/CAS/Messaging.pm cp lib/CAS/Config.pm blib/lib/CAS/Config.pm Manifying blib/man3/CAS::DB.3 Manifying blib/man3/CAS::User.3 Manifying blib/man3/CAS.3 Manifying blib/man3/CAS::Messaging.3 Manifying blib/man3/CAS::Config.3 [ERROR] [Fri Mar 9 20:17:35 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /usr/home/cwill1is/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00-load..............ok t/01-database..........Couldn't open CAS config file /usr/home/cwill1is/build/smoke/CAS.yaml: No such file or directory at /usr/home/cwill1is/.cpanplus/5.8.8/build/CAS-0.88/blib/lib/CAS/Config.pm line 149. # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-3 Failed 3/3 tests, 0.00% okay t/02-client............dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 4-7 Failed 4/7 tests, 42.86% okay t/03-user..............Couldn't open CAS config file /usr/home/cwill1is/build/smoke/CAS.yaml: No such file or directory at /usr/home/cwill1is/.cpanplus/5.8.8/build/CAS-0.88/blib/lib/CAS/Config.pm line 149. # Looks like you planned 7 tests but only ran 3. # Looks like your test died just after 3. Couldn't open CAS config file /usr/home/cwill1is/build/smoke/CAS.yaml: No such file or directory at /usr/home/cwill1is/.cpanplus/5.8.8/build/CAS-0.88/blib/lib/CAS/Config.pm line 149. # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-20 Failed 20/20 tests, 0.00% okay t/04-authentication....Couldn't open CAS config file /usr/home/cwill1is/build/smoke/CAS.yaml: No such file or directory at /usr/home/cwill1is/.cpanplus/5.8.8/build/CAS-0.88/blib/lib/CAS/Config.pm line 149. # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-7 Failed 7/7 tests, 0.00% okay t/05-authorization.....Couldn't open CAS config file /usr/home/cwill1is/build/smoke/CAS.yaml: No such file or directory at /usr/home/cwill1is/.cpanplus/5.8.8/build/CAS-0.88/blib/lib/CAS/Config.pm line 149. # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-28 Failed 28/28 tests, 0.00% okay t/06-administration....skipped all skipped: Admin methodology not settled yet t/boilerplate..........ok t/pod-coverage......... # Failed test 'Pod coverage on CAS::DB' # at /usr/home/cwill1is/perl588/lib/site_perl/5.8.8/Test/Pod/Coverage.pm line 126. # Coverage for CAS::DB is 66.7%, with 2 naked subroutines: # err # errstr # Failed test 'Pod coverage on CAS::User' # at /usr/home/cwill1is/perl588/lib/site_perl/5.8.8/Test/Pod/Coverage.pm line 126. # Coverage for CAS::User is 30.0%, with 14 naked subroutines: # crypt_pass # new_user_email # validate_Address1 # validate_Address2 # validate_City # validate_Country # validate_Email # validate_Firstname # validate_Lastname # validate_Password # validate_Phone # validate_State # validate_Username # validate_Zip # Failed test 'Pod coverage on CAS::Messaging' # at /usr/home/cwill1is/perl588/lib/site_perl/5.8.8/Test/Pod/Coverage.pm line 126. # Coverage for CAS::Messaging is 50.0%, with 3 naked subroutines: # code_value # response_code # response_is # Failed test 'Pod coverage on CAS::Config' # at /usr/home/cwill1is/perl588/lib/site_perl/5.8.8/Test/Pod/Coverage.pm line 126. # Coverage for CAS::Config is 0.0%, with 2 naked subroutines: # cas_db_connect # load # Looks like you failed 4 tests of 5. dubious Test returned status 4 (wstat 1024, 0x400) DIED. FAILED tests 2-5 Failed 4/5 tests, 20.00% okay t/pod..................skipped all skipped: Test::Pod 1.14 required for testing POD Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/01-database.t 255 65280 3 6 1-3 t/02-client.t 255 65280 7 8 4-7 t/03-user.t 255 65280 20 40 1-20 t/04-authentication.t 255 65280 7 14 1-7 t/05-authorization.t 255 65280 28 56 1-28 t/pod-coverage.t 4 1024 5 4 2-5 2 tests skipped. Failed 6/10 test scripts. 66/81 subtests failed. Files=10, Tests=81, 2 wallclock secs ( 0.99 cusr + 0.22 csys = 1.21 CPU) *** Error code 35 Stop in /usr/home/cwill1is/.cpanplus/5.8.8/build/CAS-0.88. Failed 6/10 test programs. 66/81 subtests failed. PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: DBI 1.53 Data::Dumper 2.121_08 Digest::MD5 2.36 Mail::Sendmail 0.79 Test::More 0.67 YAML 0.62 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=freebsd, osvers=5.4-release, archname=i386-freebsd-thread-multi-64int uname='freebsd scc209.staffordshire.gov.uk 5.4-release freebsd 5.4-release #0: sun may 8 10:21:06 utc 2005 [EMAIL PROTECTED]:usrobjusrsrcsysgeneric i386 ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include', optimize='-O', cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.2 [FreeBSD] 20040728', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags ='-Wl,-E -L/usr/local/lib' libpth=/usr/lib /usr/local/lib libs=-lm -lcrypt -lutil -lc_r perllibs=-lm -lcrypt -lutil -lc_r libc=, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
