This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear SEANQ, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sat Mar 10 22:54:10 2007] Trying to get 'http://www.cpan.org/authors/id/S/SE/SEANQ/CAS-0.88.tar.gz' [MSG] [Sat Mar 10 22:54:11 2007] Trying to get 'http://www.cpan.org/authors/id/S/SE/SEANQ/CHECKSUMS' [MSG] [Sat Mar 10 22:54:12 2007] Checksum matches for 'CAS-0.88.tar.gz' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/Changes' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/Makefile.PL' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/t/' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/t/02-client.t' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/t/04-authentication.t' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/t/00-load.t' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/t/06-administration.t' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/t/boilerplate.t' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/t/pod.t' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/t/03-user.t' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/t/01-database.t' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/t/pod-coverage.t' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/t/05-authorization.t' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/CAS.sql' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/README' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/MANIFEST' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/lib/' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/lib/CAS/' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/lib/CAS/DB.pm' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/lib/CAS/Config.pm' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/lib/CAS/Messaging.pm' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/lib/CAS/User.pm' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/lib/CAS.pm' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/META.yml' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS-0.88/post_install.prl' [MSG] [Sat Mar 10 22:54:13 2007] Extracted 'CAS' to '/opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88' [MSG] [Sat Mar 10 22:54:13 2007] CAS database name [CAS] CAS Host machine for database server [localhost] localhost User to log into database [CAS_query] CAS_query Password to access database [local_passwd] local_passwd default group for new users [100] 100 Debug value for this installation [0] 0 Default session timeout in seconds [900] 900 Username for primary CAS administrator [admin] admin Administrators email address [EMAIL PROTECTED] [EMAIL PROTECTED] Administrators phone # [555-1212] 555-1212 The CAS configuration file has been written. You should review the configuration file and make any edits needed. Where do you want the CAS config file installed? [/etc/] /etc/ Checking if your kit is complete... Looks good Warning: prerequisite DBI 0 not found. Warning: prerequisite Mail::Sendmail 0.7 not found. Writing Makefile for CAS The makefile has been generated. Please note that the CAS database must be installed and all privileges on that database granted to the user identified in the configuration file before make test or make install can be run sucessfully. If during the final installation steps the CAS core client (ID: 1) is not found in the database, that client and the administrative user will be added to the database. [MSG] [Sat Mar 10 22:54:13 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sat Mar 10 22:54:13 2007] Module 'CAS' requires 'DBI' version '0' to be installed [MSG] [Sat Mar 10 22:54:13 2007] Module 'CAS' requires 'Mail::Sendmail' version '0.7' to be installed [MSG] [Sat Mar 10 22:54:13 2007] Trying to get 'http://www.cpan.org/authors/id/T/TI/TIMB/DBI-1.54.tar.gz' [MSG] [Sat Mar 10 22:54:23 2007] Trying to get 'http://www.cpan.org/authors/id/T/TI/TIMB/CHECKSUMS' [MSG] [Sat Mar 10 22:54:25 2007] Checksum matches for 'DBI-1.54.tar.gz' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/Changes' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/dbd_xsh.h' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/DBI.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/DBI.xs' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/dbi_sql.h' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/dbipport.h' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/dbiprof.PL' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/dbiproxy.PL' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/dbivport.h' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/DBIXS.h' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/Driver.xst' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/Driver_xst.h' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/ex/' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/ex/perl_dbi_nulls_test.pl' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/ex/profile.pl' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/Bundle/' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/Bundle/DBI.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/DBM.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/ExampleP.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/File.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/Gofer/' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/Gofer/Policy/' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/Gofer/Policy/Base.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/Gofer/Policy/classic.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/Gofer/Policy/pedantic.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/Gofer/Policy/rush.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/Gofer/Transport/' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/Gofer/Transport/Base.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/Gofer/Transport/http.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/Gofer/Transport/null.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/Gofer/Transport/pipeone.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/Gofer/Transport/stream.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/Gofer.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/NullP.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/Proxy.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBD/Sponge.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/Const/' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/Const/GetInfo/' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/Const/GetInfo/ANSI.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/Const/GetInfo/ODBC.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/Const/GetInfoReturn.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/Const/GetInfoType.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/DBD/' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/DBD/Metadata.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/DBD.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/FAQ.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/Gofer/' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/Gofer/Execute.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/Gofer/Request.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/Gofer/Response.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/Gofer/Transport/' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/Gofer/Transport/Base.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/Gofer/Transport/mod_perl.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/Gofer/Transport/pipeone.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/Gofer/Transport/stream.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/Profile.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/ProfileData.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/ProfileDumper/' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/ProfileDumper/Apache.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/ProfileDumper.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/ProfileSubs.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/ProxyServer.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/PurePerl.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/SQL/' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/SQL/Nano.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/Util/' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/Util/_accessor.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/DBI/W32ODBC.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/Win32/' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/lib/Win32/DBIODBC.pm' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/Makefile.PL' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/MANIFEST' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/META.yml' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/Perl.xs' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/README' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/Roadmap.pod' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/01basics.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/02dbidrv.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/03handle.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/04mods.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/05thrclone.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/06attrs.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/07kids.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/08keeperr.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/09trace.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/10examp.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/11fetch.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/12quote.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/13taint.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/14utf8.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/15array.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/19fhtrace.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/20meta.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/30subclass.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/40profile.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/41prof_dump.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/42prof_data.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/43prof_env.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/50dbm.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/60preparse.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/65transact.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/70callbacks.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/72childhandles.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/80proxy.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/85gofer.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/t/pod.t' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/TASKS.pod' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/test.pl' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/TODO_2005.txt' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI-1.54/typemap' [MSG] [Sat Mar 10 22:54:25 2007] Extracted 'DBI' to '/opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.54' [MSG] [Sat Mar 10 22:54:32 2007] *** You are using a perl configured with threading enabled. *** You should be aware that using multiple threads is *** not recommended for production environments. *** Note: The optional PlRPC-modules (RPC::PlServer etc) are not installed. If you want to use the DBD::Proxy driver and DBI::ProxyServer modules, then you'll need to install the RPC::PlServer, RPC::PlClient, Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you. You can install them any time after installing the DBI. You do *not* need these modules for typical DBI usage. Optional modules are available from any CPAN mirror, in particular http://search.cpan.org/ http://www.perl.com/CPAN/modules/by-module http://www.perl.org/CPAN/modules/by-module ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module Your perl was compiled with gcc (version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13sarge1)), okay. Creating test wrappers for DBI::PurePerl: t/zvp_01basics.t t/zvp_02dbidrv.t t/zvp_03handle.t t/zvp_04mods.t t/zvp_05thrclone.t (use threads) t/zvp_06attrs.t t/zvp_07kids.t t/zvp_08keeperr.t t/zvp_09trace.t t/zvp_10examp.t t/zvp_11fetch.t t/zvp_12quote.t t/zvp_13taint.t t/zvp_14utf8.t t/zvp_15array.t t/zvp_19fhtrace.t t/zvp_20meta.t t/zvp_30subclass.t t/zvp_40profile.t t/zvp_41prof_dump.t t/zvp_42prof_data.t t/zvp_43prof_env.t t/zvp_50dbm.t t/zvp_60preparse.t t/zvp_65transact.t t/zvp_70callbacks.t t/zvp_72childhandles.t t/zvp_80proxy.t t/zvp_85gofer.t Creating test wrappers for DBD::Gofer: t/zvg_01basics.t t/zvg_02dbidrv.t t/zvg_03handle.t t/zvg_04mods.t t/zvg_05thrclone.t (use threads) t/zvg_06attrs.t t/zvg_07kids.t t/zvg_08keeperr.t t/zvg_09trace.t t/zvg_10examp.t t/zvg_11fetch.t t/zvg_12quote.t t/zvg_13taint.t t/zvg_14utf8.t t/zvg_15array.t t/zvg_19fhtrace.t t/zvg_20meta.t t/zvg_30subclass.t t/zvg_40profile.t t/zvg_41prof_dump.t t/zvg_42prof_data.t t/zvg_43prof_env.t t/zvg_50dbm.t t/zvg_60preparse.t t/zvg_65transact.t t/zvg_70callbacks.t t/zvg_72childhandles.t t/zvg_80proxy.t t/zvg_85gofer.t Creating test wrappers for PurePerl & Gofer: t/zvxgp_01basics.t t/zvxgp_02dbidrv.t t/zvxgp_03handle.t t/zvxgp_04mods.t t/zvxgp_05thrclone.t (use threads) t/zvxgp_06attrs.t t/zvxgp_07kids.t t/zvxgp_08keeperr.t t/zvxgp_09trace.t t/zvxgp_10examp.t t/zvxgp_11fetch.t t/zvxgp_12quote.t t/zvxgp_13taint.t t/zvxgp_14utf8.t t/zvxgp_15array.t t/zvxgp_19fhtrace.t t/zvxgp_20meta.t t/zvxgp_30subclass.t t/zvxgp_40profile.t t/zvxgp_41prof_dump.t t/zvxgp_42prof_data.t t/zvxgp_43prof_env.t t/zvxgp_50dbm.t t/zvxgp_60preparse.t t/zvxgp_65transact.t t/zvxgp_70callbacks.t t/zvxgp_72childhandles.t t/zvxgp_80proxy.t t/zvxgp_85gofer.t Checking if your kit is complete... Looks good I see you're using perl 5.008008 on x86_64-linux-thread-multi-ld, okay. Remember to actually *read* the README file! Use 'make' to build the software (dmake or nmake on Windows). Then 'make test' to execute self tests. Then 'make install' to install the DBI and then delete this working directory before unpacking and building any DBD::* drivers. Writing Makefile for DBI [MSG] [Sat Mar 10 22:54:32 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sat Mar 10 22:54:39 2007] Running Mkbootstrap for DBI () cp Driver_xst.h blib/arch/auto/DBI/Driver_xst.h cp lib/DBD/Proxy.pm blib/lib/DBD/Proxy.pm cp lib/DBI/Gofer/Response.pm blib/lib/DBI/Gofer/Response.pm cp lib/DBI/Gofer/Transport/Base.pm blib/lib/DBI/Gofer/Transport/Base.pm cp lib/DBI/Util/_accessor.pm blib/lib/DBI/Util/_accessor.pm cp lib/DBI/Gofer/Transport/mod_perl.pm blib/lib/DBI/Gofer/Transport/mod_perl.pm cp lib/DBD/DBM.pm blib/lib/DBD/DBM.pm cp DBIXS.h blib/arch/auto/DBI/DBIXS.h cp Roadmap.pod blib/lib/Roadmap.pod cp lib/DBI/Const/GetInfoType.pm blib/lib/DBI/Const/GetInfoType.pm cp lib/DBI/DBD/Metadata.pm blib/lib/DBI/DBD/Metadata.pm cp lib/DBD/Gofer/Transport/pipeone.pm blib/lib/DBD/Gofer/Transport/pipeone.pm cp lib/DBI/Const/GetInfo/ODBC.pm blib/lib/DBI/Const/GetInfo/ODBC.pm cp lib/DBI/ProfileDumper/Apache.pm blib/lib/DBI/ProfileDumper/Apache.pm cp Driver.xst blib/arch/auto/DBI/Driver.xst cp lib/DBD/File.pm blib/lib/DBD/File.pm cp lib/DBD/NullP.pm blib/lib/DBD/NullP.pm cp lib/DBI/ProfileSubs.pm blib/lib/DBI/ProfileSubs.pm cp dbi_sql.h blib/arch/auto/DBI/dbi_sql.h cp lib/DBD/Gofer.pm blib/lib/DBD/Gofer.pm cp lib/DBD/Gofer/Transport/http.pm blib/lib/DBD/Gofer/Transport/http.pm cp dbivport.h blib/arch/auto/DBI/dbivport.h cp dbd_xsh.h blib/arch/auto/DBI/dbd_xsh.h cp lib/DBD/Gofer/Transport/Base.pm blib/lib/DBD/Gofer/Transport/Base.pm cp lib/DBI/FAQ.pm blib/lib/DBI/FAQ.pm cp lib/DBD/Gofer/Policy/rush.pm blib/lib/DBD/Gofer/Policy/rush.pm cp lib/DBI/SQL/Nano.pm blib/lib/DBI/SQL/Nano.pm cp lib/DBI/Gofer/Request.pm blib/lib/DBI/Gofer/Request.pm cp lib/DBI/Const/GetInfo/ANSI.pm blib/lib/DBI/Const/GetInfo/ANSI.pm cp lib/DBD/Gofer/Transport/stream.pm blib/lib/DBD/Gofer/Transport/stream.pm cp lib/DBD/Gofer/Policy/classic.pm blib/lib/DBD/Gofer/Policy/classic.pm cp lib/DBI/Const/GetInfoReturn.pm blib/lib/DBI/Const/GetInfoReturn.pm cp lib/DBD/Gofer/Policy/Base.pm blib/lib/DBD/Gofer/Policy/Base.pm cp DBI.pm blib/lib/DBI.pm cp lib/DBI/Gofer/Transport/stream.pm blib/lib/DBI/Gofer/Transport/stream.pm cp lib/DBD/Sponge.pm blib/lib/DBD/Sponge.pm cp lib/DBD/Gofer/Policy/pedantic.pm blib/lib/DBD/Gofer/Policy/pedantic.pm cp lib/DBI/W32ODBC.pm blib/lib/DBI/W32ODBC.pm cp lib/DBI/Gofer/Transport/pipeone.pm blib/lib/DBI/Gofer/Transport/pipeone.pm cp lib/DBD/Gofer/Transport/null.pm blib/lib/DBD/Gofer/Transport/null.pm cp lib/Bundle/DBI.pm blib/lib/Bundle/DBI.pm cp TASKS.pod blib/lib/TASKS.pod cp lib/DBI/Profile.pm blib/lib/DBI/Profile.pm cp lib/DBI/ProfileDumper.pm blib/lib/DBI/ProfileDumper.pm cp lib/DBI/ProxyServer.pm blib/lib/DBI/ProxyServer.pm cp dbipport.h blib/arch/auto/DBI/dbipport.h cp lib/DBI/Gofer/Execute.pm blib/lib/DBI/Gofer/Execute.pm cp lib/DBI/DBD.pm blib/lib/DBI/DBD.pm cp lib/Win32/DBIODBC.pm blib/lib/Win32/DBIODBC.pm cp lib/DBI/PurePerl.pm blib/lib/DBI/PurePerl.pm cp lib/DBD/ExampleP.pm blib/lib/DBD/ExampleP.pm cp lib/DBI/ProfileData.pm blib/lib/DBI/ProfileData.pm Extracted dbiprof from dbiprof.PL with variable substitutions. Extracted dbiproxy from dbiproxy.PL with variable substitutions. Manifying blib/man1/dbiprof.1 Manifying blib/man1/dbiproxy.1 Manifying blib/man3/DBI::Gofer::Response.3 Manifying blib/man3/DBD::Proxy.3 Manifying blib/man3/DBI::Gofer::Transport::Base.3 Manifying blib/man3/DBI::Gofer::Transport::mod_perl.3 Manifying blib/man3/DBD::DBM.3 Manifying blib/man3/DBI::Const::GetInfoType.3 Manifying blib/man3/Roadmap.3 Manifying blib/man3/DBI::DBD::Metadata.3 Manifying blib/man3/DBI::Const::GetInfo::ODBC.3 Manifying blib/man3/DBD::Gofer::Transport::pipeone.3 Manifying blib/man3/DBI::ProfileDumper::Apache.3 Manifying blib/man3/DBD::File.3 Manifying blib/man3/DBI::ProfileSubs.3 Manifying blib/man3/DBD::Gofer.3 Manifying blib/man3/DBD::Gofer::Transport::http.3 Manifying blib/man3/DBD::Gofer::Transport::Base.3 Manifying blib/man3/DBI::FAQ.3 Manifying blib/man3/DBD::Gofer::Policy::rush.3 Manifying blib/man3/DBI::SQL::Nano.3 Manifying blib/man3/DBI::Gofer::Request.3 Manifying blib/man3/DBI::Const::GetInfo::ANSI.3 Manifying blib/man3/DBD::Gofer::Transport::stream.3 Manifying blib/man3/DBD::Gofer::Policy::classic.3 Manifying blib/man3/DBI::Gofer::Transport::stream.3 Manifying blib/man3/DBI.3 Manifying blib/man3/DBD::Gofer::Policy::Base.3 Manifying blib/man3/DBI::Const::GetInfoReturn.3 Manifying blib/man3/DBD::Sponge.3 Manifying blib/man3/DBD::Gofer::Policy::pedantic.3 Manifying blib/man3/DBI::Gofer::Transport::pipeone.3 Manifying blib/man3/DBI::W32ODBC.3 Manifying blib/man3/DBD::Gofer::Transport::null.3 Manifying blib/man3/Bundle::DBI.3 Manifying blib/man3/TASKS.3 Manifying blib/man3/DBI::Profile.3 Manifying blib/man3/DBI::ProfileDumper.3 Manifying blib/man3/DBI::ProxyServer.3 Manifying blib/man3/DBI::Gofer::Execute.3 Manifying blib/man3/DBI::DBD.3 Manifying blib/man3/Win32::DBIODBC.3 Manifying blib/man3/DBI::PurePerl.3 Manifying blib/man3/DBI::ProfileData.3 [MSG] [Sat Mar 10 22:55:21 2007] MAKE TEST passed: t/01basics................ok 4/132 skipped: various reasons t/02dbidrv................ok t/03handle................ok t/04mods..................ok t/05thrclone..............ok t/06attrs.................ok t/07kids..................ok t/08keeperr...............ok t/09trace.................ok t/10examp.................ok t/11fetch.................ok t/12quote.................ok t/13taint.................ok t/14utf8..................ok t/15array.................ok t/19fhtrace...............ok t/20meta..................ok t/30subclass..............ok t/40profile...............ok t/41prof_dump.............ok t/42prof_data.............ok t/43prof_env..............ok t/50dbm...................ok t/60preparse..............ok t/65transact..............ok t/70callbacks.............ok t/72childhandles..........ok t/80proxy.................skipped all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm) t/85gofer.................ok t/pod.....................ok t/zvg_01basics............ok 4/132 skipped: various reasons t/zvg_02dbidrv............ok t/zvg_03handle............ok 44/137 skipped: various reasons t/zvg_04mods..............ok t/zvg_05thrclone.......... You can ignore the 10 'Scalars leaked' messages you may see here (or send me a patch to fix the underlying problem) Scalars leaked: 1 Scalars leaked: 1 Scalars leaked: 1 Scalars leaked: 1 Scalars leaked: 1 Scalars leaked: 1 Scalars leaked: 1 Scalars leaked: 1 Scalars leaked: 1 Scalars leaked: 1 ok t/zvg_06attrs.............ok t/zvg_07kids..............ok t/zvg_08keeperr...........ok t/zvg_09trace.............ok t/zvg_10examp.............ok t/zvg_11fetch.............ok t/zvg_12quote.............ok t/zvg_13taint.............skipped all skipped: Taint attribute tests not functional with DBI_AUTOPROXY t/zvg_14utf8..............ok t/zvg_15array.............ok t/zvg_19fhtrace...........ok t/zvg_20meta..............ok t/zvg_30subclass..........ok t/zvg_40profile...........ok t/zvg_41prof_dump.........ok t/zvg_42prof_data.........ok t/zvg_43prof_env..........ok t/zvg_50dbm...............ok 2/12 skipped: various reasons t/zvg_60preparse..........ok t/zvg_65transact..........skipped all skipped: Transactions not supported by DBD::Gofer t/zvg_70callbacks.........ok t/zvg_72childhandles......ok 2/14 skipped: various reasons t/zvg_80proxy.............skipped all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm) t/zvg_85gofer.............ok t/zvp_01basics............ok 4/132 skipped: various reasons t/zvp_02dbidrv............ok 10/51 skipped: various reasons t/zvp_03handle............ok 76/137 skipped: various reasons t/zvp_04mods..............ok t/zvp_05thrclone..........ok t/zvp_06attrs.............ok 7/137 skipped: various reasons t/zvp_07kids..............skipped all skipped: $h->{Kids} attribute not supported for DBI::PurePerl t/zvp_08keeperr...........ok t/zvp_09trace.............ok t/zvp_10examp.............ok 3/204 skipped: various reasons t/zvp_11fetch.............ok t/zvp_12quote.............ok t/zvp_13taint.............skipped all skipped: Taint attributes not supported with DBI::PurePerl t/zvp_14utf8..............ok t/zvp_15array.............ok t/zvp_19fhtrace...........ok t/zvp_20meta..............ok t/zvp_30subclass..........ok t/zvp_40profile...........skipped all skipped: profiling not supported for DBI::PurePerl t/zvp_41prof_dump.........skipped all skipped: profiling not supported for DBI::PurePerl t/zvp_42prof_data.........skipped all skipped: profiling not supported for DBI::PurePerl t/zvp_43prof_env..........skipped all skipped: profiling not supported for DBI::PurePerl t/zvp_50dbm...............ok t/zvp_60preparse..........skipped all skipped: preparse not supported for DBI::PurePerl t/zvp_65transact..........ok t/zvp_70callbacks.........skipped all skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl t/zvp_72childhandles......ok t/zvp_80proxy.............skipped all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm) t/zvp_85gofer.............ok t/zvxgp_01basics..........ok 4/132 skipped: various reasons t/zvxgp_02dbidrv..........ok 10/51 skipped: various reasons t/zvxgp_03handle..........ok 76/137 skipped: various reasons t/zvxgp_04mods............ok t/zvxgp_05thrclone........ok t/zvxgp_06attrs...........ok 7/137 skipped: various reasons t/zvxgp_07kids............skipped all skipped: $h->{Kids} attribute not supported for DBI::PurePerl t/zvxgp_08keeperr.........ok t/zvxgp_09trace...........ok t/zvxgp_10examp...........ok 3/204 skipped: various reasons t/zvxgp_11fetch...........ok t/zvxgp_12quote...........ok t/zvxgp_13taint...........skipped all skipped: Taint attributes not supported with DBI::PurePerl t/zvxgp_14utf8............ok t/zvxgp_15array...........ok t/zvxgp_19fhtrace.........ok t/zvxgp_20meta............ok t/zvxgp_30subclass........ok t/zvxgp_40profile.........skipped all skipped: profiling not supported for DBI::PurePerl t/zvxgp_41prof_dump.......skipped all skipped: profiling not supported for DBI::PurePerl t/zvxgp_42prof_data.......skipped all skipped: profiling not supported for DBI::PurePerl t/zvxgp_43prof_env........skipped all skipped: profiling not supported for DBI::PurePerl t/zvxgp_50dbm.............ok 2/12 skipped: various reasons t/zvxgp_60preparse........skipped all skipped: preparse not supported for DBI::PurePerl t/zvxgp_65transact........skipped all skipped: Transactions not supported by DBD::Gofer t/zvxgp_70callbacks.......skipped all skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl t/zvxgp_72childhandles....ok 2/14 skipped: various reasons t/zvxgp_80proxy...........skipped all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm) t/zvxgp_85gofer...........ok All tests successful, 23 tests and 260 subtests skipped. Files=117, Tests=5345, 42 wallclock secs (36.66 cusr + 4.01 csys = 40.67 CPU) test.pl DBI test application $Revision: 8812 $ Switch: DBI 1.54 by Tim Bunce, 1.54 Available Drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge dbi:ExampleP:: testing 5 sets of 20 connections: Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Made 100 connections in 0 wallclock secs ( 0.01 usr + 0.01 sys = 0.02 CPU) Testing handle creation speed... 20408 NullP sth/s perl 5.008008 x86_64-linux-thread-multi-ld (gcc 3.4.4 -g -O3) 0.000049s test.pl done [MSG] [Sat Mar 10 22:55:21 2007] Ok, not sending test report [MSG] [Sat Mar 10 22:55:21 2007] Trying to get 'http://www.cpan.org/authors/id/M/MI/MIVKOVIC/Mail-Sendmail-0.79.tar.gz' [MSG] [Sat Mar 10 22:55:23 2007] Trying to get 'http://www.cpan.org/authors/id/M/MI/MIVKOVIC/CHECKSUMS' [MSG] [Sat Mar 10 22:55:23 2007] Checksum matches for 'Mail-Sendmail-0.79.tar.gz' [MSG] [Sat Mar 10 22:55:23 2007] Extracted 'Mail-Sendmail-0.79/' [MSG] [Sat Mar 10 22:55:23 2007] Extracted 'Mail-Sendmail-0.79/Todo' [MSG] [Sat Mar 10 22:55:23 2007] Extracted 'Mail-Sendmail-0.79/README' [MSG] [Sat Mar 10 22:55:23 2007] Extracted 'Mail-Sendmail-0.79/MANIFEST' [MSG] [Sat Mar 10 22:55:23 2007] Extracted 'Mail-Sendmail-0.79/test.pl' [MSG] [Sat Mar 10 22:55:23 2007] Extracted 'Mail-Sendmail-0.79/Sendmail.pm' [MSG] [Sat Mar 10 22:55:23 2007] Extracted 'Mail-Sendmail-0.79/Changes' [MSG] [Sat Mar 10 22:55:23 2007] Extracted 'Mail-Sendmail-0.79/Makefile.PL' [MSG] [Sat Mar 10 22:55:23 2007] Extracted 'Mail-Sendmail-0.79/Sendmail.html' [MSG] [Sat Mar 10 22:55:23 2007] Extracted 'Mail::Sendmail' to '/opt/perl/testers/.cpanplus/5.8.8/build/Mail-Sendmail-0.79' [MSG] [Sat Mar 10 22:55:24 2007] Checking if your kit is complete... Looks good Writing Makefile for Mail::Sendmail ********************************************************************** NOTE ---- The test (test.pl) is a real test for this module: it sends an e-mail. You may want to edit test.pl before running it (directly or through make test), so the mail is sent to you. If you also leave my address, the mail goes into a database from which I can get statistics. Read the docs, and have fun... ********************************************************************** [MSG] [Sat Mar 10 22:55:24 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sat Mar 10 22:55:24 2007] cp Sendmail.pm blib/lib/Mail/Sendmail.pm Manifying blib/man3/Mail::Sendmail.3 [MSG] [Sat Mar 10 22:55:32 2007] MAKE TEST passed: 1..2 Test Mail::Sendmail 0.79 Trying to send a message to the author (and/or whoever if you edited test.pl) (The test is designed so it can be run by Test::Harness from CPAN.pm. Edit it to send the mail to yourself for more concrete feedback. If you do this, you also need to specify a different mail server, and possibly a different From: address.) Current recipient(s): 'Sendmail Test <[EMAIL PROTECTED]>' ok 1 Server set to: mail.alma.ch Sending... content of $Mail::Sendmail::log: Mail::Sendmail v. 0.79 - Sat Mar 10 22:55:24 2007 Date: Sat, 10 Mar 2007 22:55:24 +0800 Server: mail.alma.ch Port: 25 From: [EMAIL PROTECTED] Subject: Mail::Sendmail version 0.79 test To: [EMAIL PROTECTED] Result: 250 Ok: queued as 85EC417E33 ok 2 [MSG] [Sat Mar 10 22:55:32 2007] Ok, not sending test report [MSG] [Sat Mar 10 22:55:32 2007] cp lib/CAS/DB.pm blib/lib/CAS/DB.pm cp lib/CAS/User.pm blib/lib/CAS/User.pm cp lib/CAS.pm blib/lib/CAS.pm cp lib/CAS/Messaging.pm blib/lib/CAS/Messaging.pm cp lib/CAS/Config.pm blib/lib/CAS/Config.pm Manifying blib/man3/CAS::DB.3 Manifying blib/man3/CAS::User.3 Manifying blib/man3/CAS.3 Manifying blib/man3/CAS::Messaging.3 Manifying blib/man3/CAS::Config.3 [ERROR] [Sat Mar 10 22:55:34 2007] MAKE TEST failed: ¤£§Ã±æªº¸Ã¸m¿é¥X¤J±±¨î (ioctl) t/00-load..............ok t/01-database..........Problem connecting to database: install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.54/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.54/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.54/blib /opt/perl/testers/.cpanplus/5.8.8/build/Mail-Sendmail-0.79/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Mail-Sendmail-0.79/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Mail-Sendmail-0.79/blib /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl . /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl) at (eval 34) line 3. Perhaps the DBD::mysql perl module hasn't been fully installed, or perhaps the capitalisation of 'mysql' isn't right. Available drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge. at /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib/lib/CAS/DB.pm line 103 # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-3 Failed 3/3 tests, 0.00% okay t/02-client............Problem connecting to database: install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.54/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.54/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.54/blib /opt/perl/testers/.cpanplus/5.8.8/build/Mail-Sendmail-0.79/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Mail-Sendmail-0.79/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Mail-Sendmail-0.79/blib /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl . /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl) at (eval 43) line 3. Perhaps the DBD::mysql perl module hasn't been fully installed, or perhaps the capitalisation of 'mysql' isn't right. Available drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge. at /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib/lib/CAS/DB.pm line 103 # Looks like you planned 7 tests but only ran 3. # Looks like your test died just after 3. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 4-7 Failed 4/7 tests, 42.86% okay t/03-user..............Problem connecting to database: install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.54/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.54/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.54/blib /opt/perl/testers/.cpanplus/5.8.8/build/Mail-Sendmail-0.79/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Mail-Sendmail-0.79/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Mail-Sendmail-0.79/blib /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl . /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl) at (eval 36) line 3. Perhaps the DBD::mysql perl module hasn't been fully installed, or perhaps the capitalisation of 'mysql' isn't right. Available drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge. at /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib/lib/CAS/DB.pm line 103 # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-20 Failed 20/20 tests, 0.00% okay t/04-authentication....Problem connecting to database: install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.54/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.54/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.54/blib /opt/perl/testers/.cpanplus/5.8.8/build/Mail-Sendmail-0.79/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Mail-Sendmail-0.79/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Mail-Sendmail-0.79/blib /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl . /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl) at (eval 36) line 3. Perhaps the DBD::mysql perl module hasn't been fully installed, or perhaps the capitalisation of 'mysql' isn't right. Available drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge. at /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib/lib/CAS/DB.pm line 103 # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-7 Failed 7/7 tests, 0.00% okay t/05-authorization.....Problem connecting to database: install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.54/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.54/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.54/blib /opt/perl/testers/.cpanplus/5.8.8/build/Mail-Sendmail-0.79/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Mail-Sendmail-0.79/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Mail-Sendmail-0.79/blib /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl . /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl) at (eval 36) line 3. Perhaps the DBD::mysql perl module hasn't been fully installed, or perhaps the capitalisation of 'mysql' isn't right. Available drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge. at /opt/perl/testers/.cpanplus/5.8.8/build/CAS-0.88/blib/lib/CAS/DB.pm line 103 # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-28 Failed 28/28 tests, 0.00% okay t/06-administration....skipped all skipped: Admin methodology not settled yet t/boilerplate..........ok t/pod-coverage......... # Failed test 'Pod coverage on CAS::DB' # at /opt/perl/testers/lib/site_perl/5.8.8/Test/Pod/Coverage.pm line 126. # Coverage for CAS::DB is 66.7%, with 2 naked subroutines: # err # errstr # Failed test 'Pod coverage on CAS::User' # at /opt/perl/testers/lib/site_perl/5.8.8/Test/Pod/Coverage.pm line 126. # Coverage for CAS::User is 30.0%, with 14 naked subroutines: # crypt_pass # new_user_email # validate_Address1 # validate_Address2 # validate_City # validate_Country # validate_Email # validate_Firstname # validate_Lastname # validate_Password # validate_Phone # validate_State # validate_Username # validate_Zip # Failed test 'Pod coverage on CAS::Messaging' # at /opt/perl/testers/lib/site_perl/5.8.8/Test/Pod/Coverage.pm line 126. # Coverage for CAS::Messaging is 50.0%, with 3 naked subroutines: # code_value # response_code # response_is # Failed test 'Pod coverage on CAS::Config' # at /opt/perl/testers/lib/site_perl/5.8.8/Test/Pod/Coverage.pm line 126. # Coverage for CAS::Config is 0.0%, with 2 naked subroutines: # cas_db_connect # load # Looks like you failed 4 tests of 5. dubious Test returned status 4 (wstat 1024, 0x400) DIED. FAILED tests 2-5 Failed 4/5 tests, 20.00% okay t/pod..................ok Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/01-database.t 255 65280 3 6 1-3 t/02-client.t 255 65280 7 8 4-7 t/03-user.t 255 65280 20 40 1-20 t/04-authentication.t 255 65280 7 14 1-7 t/05-authorization.t 255 65280 28 56 1-28 t/pod-coverage.t 4 1024 5 4 2-5 1 test skipped. Failed 6/10 test scripts. 66/86 subtests failed. Files=10, Tests=86, 2 wallclock secs ( 1.29 cusr + 0.20 csys = 1.49 CPU) Failed 6/10 test programs. 66/86 subtests failed. make: *** [test_dynamic] Error 255 MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: DBD::mysql As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'SEANQ ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'DBD::mysql' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: DBI 1.54 Data::Dumper 2.121_08 Digest::MD5 2.36 Mail::Sendmail 0.79 Test::More 0.67 YAML 0.62 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.16.29, archname=x86_64-linux-thread-multi-ld uname='linux rinse 2.6.16.29 #1 smp sun nov 5 23:08:05 cst 2006 x86_64 gnulinux ' config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true [EMAIL PROTECTED]' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g -O3', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.4 20050314 (prerelease) (Debian 3.4.3-13sarge1)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8 alignbytes=16, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.2.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.2' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE' cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
