This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Yves, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sun Mar 11 22:24:09 2007] Trying to get 'http://www.cpan.org/authors/id/G/GA/GARTHD/Finance-ChartHist-0.03.tar.gz' [MSG] [Sun Mar 11 22:24:11 2007] Trying to get 'http://www.cpan.org/authors/id/G/GA/GARTHD/CHECKSUMS' [MSG] [Sun Mar 11 22:24:12 2007] Checksum matches for 'Finance-ChartHist-0.03.tar.gz' [MSG] [Sun Mar 11 22:24:14 2007] Extracted 'Finance-ChartHist-0.03/' [MSG] [Sun Mar 11 22:24:14 2007] Extracted 'Finance-ChartHist-0.03/Changes' [MSG] [Sun Mar 11 22:24:14 2007] Extracted 'Finance-ChartHist-0.03/lib/' [MSG] [Sun Mar 11 22:24:14 2007] Extracted 'Finance-ChartHist-0.03/lib/Finance/' [MSG] [Sun Mar 11 22:24:14 2007] Extracted 'Finance-ChartHist-0.03/lib/Finance/ChartHist.pm' [MSG] [Sun Mar 11 22:24:14 2007] Extracted 'Finance-ChartHist-0.03/Makefile.PL' [MSG] [Sun Mar 11 22:24:15 2007] Extracted 'Finance-ChartHist-0.03/MANIFEST' [MSG] [Sun Mar 11 22:24:15 2007] Extracted 'Finance-ChartHist-0.03/META.yml' [MSG] [Sun Mar 11 22:24:15 2007] Extracted 'Finance-ChartHist-0.03/README' [MSG] [Sun Mar 11 22:24:15 2007] Extracted 'Finance-ChartHist-0.03/t/' [MSG] [Sun Mar 11 22:24:15 2007] Extracted 'Finance-ChartHist-0.03/t/00-load.t' [MSG] [Sun Mar 11 22:24:15 2007] Extracted 'Finance-ChartHist-0.03/t/boilerplate.t' [MSG] [Sun Mar 11 22:24:15 2007] Extracted 'Finance-ChartHist-0.03/t/charthist.t' [MSG] [Sun Mar 11 22:24:15 2007] Extracted 'Finance-ChartHist-0.03/t/pod-coverage.t' [MSG] [Sun Mar 11 22:24:15 2007] Extracted 'Finance-ChartHist-0.03/t/pod.t' [MSG] [Sun Mar 11 22:24:15 2007] Extracted 'Finance-ChartHist-0.03/t/private.t' [MSG] [Sun Mar 11 22:24:15 2007] Extracted 'Finance::ChartHist' to '/export/home/chris/perl588/.cpanplus/5.8.8/build/Finance-ChartHist-0.03' [MSG] [Sun Mar 11 22:24:22 2007] Checking if your kit is complete... Looks good Warning: prerequisite Date::Simple 0 not found. Warning: prerequisite Finance::QuoteHist 1.09 not found. Warning: prerequisite GD::Graph 0 not found. Writing Makefile for Finance::ChartHist [MSG] [Sun Mar 11 22:24:22 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sun Mar 11 22:24:22 2007] Module 'Finance::ChartHist' requires 'Date::Simple' version '0' to be installed [MSG] [Sun Mar 11 22:24:22 2007] Module 'Finance::ChartHist' requires 'Finance::QuoteHist' version '1.09' to be installed [MSG] [Sun Mar 11 22:24:22 2007] Module 'Finance::ChartHist' requires 'GD::Graph' version '0' to be installed [MSG] [Sun Mar 11 22:24:22 2007] Trying to get 'http://www.cpan.org/authors/id/Y/YV/YVES/Date-Simple-3.02.tar.gz' [MSG] [Sun Mar 11 22:24:24 2007] Trying to get 'http://www.cpan.org/authors/id/Y/YV/YVES/CHECKSUMS' [MSG] [Sun Mar 11 22:24:25 2007] Checksum matches for 'Date-Simple-3.02.tar.gz' [MSG] [Sun Mar 11 22:24:26 2007] Extracted 'Date-Simple-3.02/' [MSG] [Sun Mar 11 22:24:26 2007] Extracted 'Date-Simple-3.02/ChangeLog' [MSG] [Sun Mar 11 22:24:26 2007] Extracted 'Date-Simple-3.02/COPYING' [MSG] [Sun Mar 11 22:24:26 2007] Extracted 'Date-Simple-3.02/lib/' [MSG] [Sun Mar 11 22:24:26 2007] Extracted 'Date-Simple-3.02/lib/Date/' [MSG] [Sun Mar 11 22:24:26 2007] Extracted 'Date-Simple-3.02/lib/Date/Simple/' [MSG] [Sun Mar 11 22:24:26 2007] Extracted 'Date-Simple-3.02/lib/Date/Simple/D8.pm' [MSG] [Sun Mar 11 22:24:26 2007] Extracted 'Date-Simple-3.02/lib/Date/Simple/Fmt.pm' [MSG] [Sun Mar 11 22:24:26 2007] Extracted 'Date-Simple-3.02/lib/Date/Simple/ISO.pm' [MSG] [Sun Mar 11 22:24:26 2007] Extracted 'Date-Simple-3.02/lib/Date/Simple/NoXS.pm' [MSG] [Sun Mar 11 22:24:26 2007] Extracted 'Date-Simple-3.02/lib/Date/Simple.pm' [MSG] [Sun Mar 11 22:24:26 2007] Extracted 'Date-Simple-3.02/Makefile.PL' [MSG] [Sun Mar 11 22:24:26 2007] Extracted 'Date-Simple-3.02/MANIFEST' [MSG] [Sun Mar 11 22:24:26 2007] Extracted 'Date-Simple-3.02/MANIFEST.SKIP' [MSG] [Sun Mar 11 22:24:26 2007] Extracted 'Date-Simple-3.02/META.yml' [MSG] [Sun Mar 11 22:24:27 2007] Extracted 'Date-Simple-3.02/README' [MSG] [Sun Mar 11 22:24:27 2007] Extracted 'Date-Simple-3.02/Simple.xs' [MSG] [Sun Mar 11 22:24:27 2007] Extracted 'Date-Simple-3.02/t/' [MSG] [Sun Mar 11 22:24:27 2007] Extracted 'Date-Simple-3.02/t/date.t' [MSG] [Sun Mar 11 22:24:27 2007] Extracted 'Date::Simple' to '/export/home/chris/perl588/.cpanplus/5.8.8/build/Date-Simple-3.02' [MSG] [Sun Mar 11 22:24:29 2007] Enabling XS code. If you get errors, run `make distclean' and try again using `perl Makefile.PL noxs'. Checking if your kit is complete... Looks good Writing Makefile for Date::Simple [MSG] [Sun Mar 11 22:24:29 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sun Mar 11 22:24:54 2007] cp lib/Date/Simple/ISO.pm blib/lib/Date/Simple/ISO.pm cp lib/Date/Simple.pm blib/lib/Date/Simple.pm cp lib/Date/Simple/D8.pm blib/lib/Date/Simple/D8.pm cp lib/Date/Simple/NoXS.pm blib/lib/Date/Simple/NoXS.pm cp lib/Date/Simple/Fmt.pm blib/lib/Date/Simple/Fmt.pm /export/home/chris/perl588/bin/perl /export/home/chris/perl588/lib/5.8.8/ExtUtils/xsubpp -typemap /export/home/chris/perl588/lib/5.8.8/ExtUtils/typemap Simple.xs > Simple.xsc && mv Simple.xsc Simple.c Please specify prototyping behavior for Simple.xs (see perlxs manual) gcc -c -D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -O -DVERSION=\"3.02\" -DXS_VERSION=\"3.02\" -fPIC "-I/export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/CORE" Simple.c Running Mkbootstrap for Date::Simple () chmod 644 Simple.bs rm -f blib/arch/auto/Date/Simple/Simple.so gcc -G -L/usr/local/lib Simple.o -o blib/arch/auto/Date/Simple/Simple.so \ \ chmod 755 blib/arch/auto/Date/Simple/Simple.so cp Simple.bs blib/arch/auto/Date/Simple/Simple.bs chmod 644 blib/arch/auto/Date/Simple/Simple.bs Manifying blib/man3/Date::Simple::ISO.3 Manifying blib/man3/Date::Simple::NoXS.3 Manifying blib/man3/Date::Simple::D8.3 Manifying blib/man3/Date::Simple.3 Manifying blib/man3/Date::Simple::Fmt.3 [ERROR] [Sun Mar 11 22:25:00 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /export/home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/date.... # Failed test at t/date.t line 48. # Failed test at t/date.t line 55. # got: '2000-00-03' # expected: '2000-03-06' # Failed test at t/date.t line 58. # got: '2000-00-02' # expected: '2000-02-21' # Failed test at t/date.t line 64. # got: '2000-00-02' # expected: '2000-02-28' # Failed test at t/date.t line 67. # got: '2000-00-02' # expected: '2000-02-27' # Failed test at t/date.t line 68. # got: '2000-00-02' # expected: '2000-02-29' # Failed test at t/date.t line 87. # got: '1998-00-03' # expected: '1998-03-07' # Failed test at t/date.t line 90. # got: '1998-00-02' # expected: '1998-02-21' # Failed test at t/date.t line 93. # got: '1998-00-02' # expected: '1998-02-28' # Failed test at t/date.t line 95. # got: '1998-00-02' # expected: '1998-02-27' # Failed test at t/date.t line 96. # got: '1998-00-03' # expected: '1998-03-01' # Failed test at t/date.t line 120. # got: '20000003' # expected: '20000301' # Failed test 'Normal overloaded stringify' # at t/date.t line 214. # got: '1972-00-04' # expected: '1972-04-28' # Failed test 'D8 overloaded stringify' # at t/date.t line 215. # got: '19720004' # expected: '19720428' # Failed test 'ISO overloaded stringify' # at t/date.t line 216. # got: '1972-00-04' # expected: '1972-04-28' # Failed test 'Normal as_d8' # at t/date.t line 224. # got: '19720004' # expected: '19720428' # Failed test 'D8 as_d8' # at t/date.t line 225. # got: '19720004' # expected: '19720428' # Failed test 'ISO as_d8' # at t/date.t line 226. # got: '19720004' # expected: '19720428' # Failed test 'Fmt as_d8' # at t/date.t line 227. # got: '19720004' # expected: '19720428' # Failed test 'Normal as_iso' # at t/date.t line 229. # got: '1972-00-04' # expected: '1972-04-28' # Failed test 'D8 as_iso' # at t/date.t line 230. # got: '1972-00-04' # expected: '1972-04-28' # Failed test 'ISO as_iso' # at t/date.t line 231. # got: '1972-00-04' # expected: '1972-04-28' # Failed test 'Fmt as_iso' # at t/date.t line 232. # got: '1972-00-04' # expected: '1972-04-28' # Failed test 'Normal overloaded stringify' # at t/date.t line 254. # got: '2007-00-03' # expected: '2007-03-11' # Failed test 'D8 overloaded stringify' # at t/date.t line 255. # got: '20070003' # expected: '20070311' # Failed test 'ISO overloaded stringify' # at t/date.t line 256. # got: '2007-00-03' # expected: '2007-03-11' # Looks like you failed 26 tests of 227. Failed 1/1 test programs. 26/227 subtests failed. make: Fatal error: Command failed for target `test_dynamic' dubious Test returned status 26 (wstat 6656, 0x1a00) DIED. FAILED tests 22, 24, 26, 30-32, 42, 44, 46-48, 63, 200-202, 208-215, 224-226 Failed 26/227 tests, 88.55% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/date.t 26 6656 227 26 22 24 26 30-32 42 44 46-48 63 200-202 208- 215 224-226 Failed 1/1 test scripts. 26/227 subtests failed. Files=1, Tests=227, 3 wallclock secs ( 0.36 cusr + 0.09 csys = 0.45 CPU) *** Error code 26 PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Scalar::Util 1.19 Test::More 0.67 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = C PATH = /export/home/chris/perl/bin:/usr/sfw/bin:/usr/ccs/bin:/usr/local/bin:/usr/bin: PERL5LIB = :/export/home/chris/perl588/.cpanplus/5.8.8/build/Date-Simple-3.02/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Date-Simple-3.02/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/Date-Simple-3.02/blib PERL5_CPANPLUS_IS_RUNNING = 1368 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/bash TERM = sun-color Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /export/home/chris/perl588/bin/perl UID: $< = 100 EUID: $> = 100 GID: $( = 1 1 EGID: $) = 1 1 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=solaris, osvers=2.10, archname=i86pc-solaris-thread-multi-64int uname='sunos soleil 5.10 generic_118855-33 i86pc i386 i86pc ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV', optimize='-O', cppflags='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.3 (csl-sol210-3_4-branch+sol_rpath)', gccosandvers='solaris2.10' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib ' libpth=/usr/local/lib /usr/lib /usr/ccs/lib libs=-lsocket -lnsl -ldl -lm -lpthread -lc perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -R /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/CORE' cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
