This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear MUMIAW, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Thu Mar 15 15:35:37 2007] Trying to get 'http://www.cpan.org/authors/id/M/MU/MUMIAW/Tie-FlatFile-Array-0.02.tar.gz' [MSG] [Thu Mar 15 15:35:39 2007] Trying to get 'http://www.cpan.org/authors/id/M/MU/MUMIAW/CHECKSUMS' [MSG] [Thu Mar 15 15:35:39 2007] Checksum matches for 'Tie-FlatFile-Array-0.02.tar.gz' [MSG] [Thu Mar 15 15:35:42 2007] Extracted 'Tie-FlatFile-Array-0.02' [MSG] [Thu Mar 15 15:35:42 2007] Extracted 'Tie-FlatFile-Array-0.02/META.yml' [MSG] [Thu Mar 15 15:35:42 2007] Extracted 'Tie-FlatFile-Array-0.02/lib' [MSG] [Thu Mar 15 15:35:42 2007] Extracted 'Tie-FlatFile-Array-0.02/lib/Tie' [MSG] [Thu Mar 15 15:35:42 2007] Extracted 'Tie-FlatFile-Array-0.02/lib/Tie/FlatFile' [MSG] [Thu Mar 15 15:35:42 2007] Extracted 'Tie-FlatFile-Array-0.02/lib/Tie/FlatFile/ArrayHelper.pm' [MSG] [Thu Mar 15 15:35:42 2007] Extracted 'Tie-FlatFile-Array-0.02/lib/Tie/FlatFile/Array.pm' [MSG] [Thu Mar 15 15:35:42 2007] Extracted 'Tie-FlatFile-Array-0.02/lib/Tie/FlatFile/Array.pod' [MSG] [Thu Mar 15 15:35:42 2007] Extracted 'Tie-FlatFile-Array-0.02/Changes' [MSG] [Thu Mar 15 15:35:42 2007] Extracted 'Tie-FlatFile-Array-0.02/MANIFEST' [MSG] [Thu Mar 15 15:35:42 2007] Extracted 'Tie-FlatFile-Array-0.02/t' [MSG] [Thu Mar 15 15:35:43 2007] Extracted 'Tie-FlatFile-Array-0.02/t/Tie-FlatFile-Array.t' [MSG] [Thu Mar 15 15:35:43 2007] Extracted 'Tie-FlatFile-Array-0.02/t/FF_Common.pm' [MSG] [Thu Mar 15 15:35:43 2007] Extracted 'Tie-FlatFile-Array-0.02/Makefile.PL' [MSG] [Thu Mar 15 15:35:43 2007] Extracted 'Tie-FlatFile-Array-0.02/README' [MSG] [Thu Mar 15 15:35:43 2007] Extracted 'Tie::FlatFile::Array' to '/home/chris/.cpanplus/5.8.8/build/Tie-FlatFile-Array-0.02' [MSG] [Thu Mar 15 15:35:47 2007] Checking if your kit is complete... Looks good Writing Makefile for Tie::FlatFile::Array [MSG] [Thu Mar 15 15:35:47 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Mar 15 15:35:55 2007] cp lib/Tie/FlatFile/Array.pod blib/lib/Tie/FlatFile/Array.pod cp lib/Tie/FlatFile/ArrayHelper.pm blib/lib/Tie/FlatFile/ArrayHelper.pm cp lib/Tie/FlatFile/Array.pm blib/lib/Tie/FlatFile/Array.pm [ERROR] [Thu Mar 15 15:35:59 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/Tie-FlatFile-Array....Base class package "Class::Accessor" is empty. (Perhaps you need to 'use' the module which defines that package first.) at /home/chris/.cpanplus/5.8.8/build/Tie-FlatFile-Array-0.02/blib/lib/Tie/FlatFile/Array.pm line 6 BEGIN failed--compilation aborted at /home/chris/.cpanplus/5.8.8/build/Tie-FlatFile-Array-0.02/blib/lib/Tie/FlatFile/Array.pm line 6. Compilation failed in require at t/Tie-FlatFile-Array.t line 6. BEGIN failed--compilation aborted at t/Tie-FlatFile-Array.t line 6. # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-9 Failed 9/9 tests, 0.00% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/Tie-FlatFile-Array.t 255 65280 9 18 1-9 Failed 1/1 test scripts. 9/9 subtests failed. Files=1, Tests=9, 2 wallclock secs ( 0.10 cusr + 0.25 csys = 0.35 CPU) Failed 1/1 test programs. 9/9 subtests failed. *** Error code 255 Stop in /home/chris/.cpanplus/5.8.8/build/Tie-FlatFile-Array-0.02 (line 760 of Makefile). ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /home/chris/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:. PERL5LIB = :/home/chris/.cpanplus/5.8.8/build/Tie-FlatFile-Array-0.02/blib/lib:/home/chris/.cpanplus/5.8.8/build/Tie-FlatFile-Array-0.02/blib/arch:/home/chris/.cpanplus/5.8.8/build/Tie-FlatFile-Array-0.02/blib PERL5_CPANPLUS_IS_RUNNING = 2268 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/ksh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /usr/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 1000 0 1000 EGID: $) = 1000 0 1000 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=openbsd, osvers=4.0, archname=i386-openbsd uname='openbsd' config_args='-dsE -Dopenbsd_distribution=defined' hint=recommended, useposix=true, d_sigaction=define usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include', optimize='-O2', cppflags='-fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include' ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.0' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags ='-Wl,-E ' libpth=/usr/lib libs=-lm -lutil -lc perllibs=-lm -lutil -lc libc=/usr/lib/libc.a, so=so, useshrplib=true, libperl=libperl.so.10.1 gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-R/usr/libdata/perl5/i386-openbsd/5.8.8/CORE' cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC '
