This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Adrian Hall, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Tue Mar 20 02:25:04 2007] Trying to get 'http://www.cpan.org/authors/id/A/AH/AHALL/Net-MirapointAdmin-3.03.tar.gz' [MSG] [Tue Mar 20 02:25:05 2007] Trying to get 'http://www.cpan.org/authors/id/A/AH/AHALL/CHECKSUMS' [MSG] [Tue Mar 20 02:25:06 2007] Checksum matches for 'Net-MirapointAdmin-3.03.tar.gz' [MSG] [Tue Mar 20 02:25:06 2007] Extracted 'Net-MirapointAdmin-3.03' [MSG] [Tue Mar 20 02:25:06 2007] Extracted 'Net-MirapointAdmin-3.03/INSTALL' [MSG] [Tue Mar 20 02:25:06 2007] Extracted 'Net-MirapointAdmin-3.03/lib' [MSG] [Tue Mar 20 02:25:06 2007] Extracted 'Net-MirapointAdmin-3.03/lib/Net' [MSG] [Tue Mar 20 02:25:06 2007] Extracted 'Net-MirapointAdmin-3.03/lib/Net/MirapointAdmin.pm' [MSG] [Tue Mar 20 02:25:06 2007] Extracted 'Net-MirapointAdmin-3.03/LICENSE' [MSG] [Tue Mar 20 02:25:06 2007] Extracted 'Net-MirapointAdmin-3.03/Makefile.PL' [MSG] [Tue Mar 20 02:25:06 2007] Extracted 'Net-MirapointAdmin-3.03/MANIFEST' [MSG] [Tue Mar 20 02:25:06 2007] Extracted 'Net-MirapointAdmin-3.03/META.yml' [MSG] [Tue Mar 20 02:25:06 2007] Extracted 'Net-MirapointAdmin-3.03/README' [MSG] [Tue Mar 20 02:25:06 2007] Extracted 'Net-MirapointAdmin-3.03/t' [MSG] [Tue Mar 20 02:25:06 2007] Extracted 'Net-MirapointAdmin-3.03/t/00_use.t' [MSG] [Tue Mar 20 02:25:06 2007] Extracted 'Net-MirapointAdmin-3.03/t/01_low.t' [MSG] [Tue Mar 20 02:25:06 2007] Extracted 'Net::MirapointAdmin' to '/home/cpan/.cpanplus/5.8.8/build/Net-MirapointAdmin-3.03' [MSG] [Tue Mar 20 02:25:07 2007] Checking if your kit is complete... Looks good Writing Makefile for Net::MirapointAdmin Testing requires access to a Mirapoint host on port 10143 (and 10243 if you are testing SSL connectivity). Do you wish to enable live testing? [n] n [MSG] [Tue Mar 20 02:25:07 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Tue Mar 20 02:25:09 2007] cp lib/Net/MirapointAdmin.pm blib/lib/Net/MirapointAdmin.pm Manifying blib/man3/Net::MirapointAdmin.3 [ERROR] [Tue Mar 20 02:25:09 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_use....# Test 3 got: "3.03" (t/00_use.t at line 20) # Expected: "3.02" # t/00_use.t line 20 is: ok($Net::MirapointAdmin::VERSION, "3.02"); FAILED test 3 Failed 1/3 tests, 66.67% okay t/01_low....ok Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/00_use.t 3 1 3 Failed 1/2 test scripts. 1/10 subtests failed. Files=2, Tests=10, 0 wallclock secs ( 0.37 cusr + 0.06 csys = 0.43 CPU) Failed 1/2 test programs. 1/10 subtests failed. gmake: *** [test_dynamic] Error 25 PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: IO::Socket 1.30 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin PERL5LIB = :/home/cpan/.cpanplus/5.8.8/build/Net-MirapointAdmin-3.03/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Net-MirapointAdmin-3.03/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Net-MirapointAdmin-3.03/blib PERL5_CPANPLUS_IS_RUNNING = 29813 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/pkg/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl588/bin/perl UID: $< = 1002 EUID: $> = 1002 GID: $( = 100 100 EGID: $) = 100 100 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0: tue oct 31 04:32:05 utc 2006 [EMAIL PROTECTED]:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop i386 ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include', optimize='-O', cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include' ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib' libpth=/usr/pkg/lib /lib /usr/lib libs=-lm -lcrypt -lutil -lc -lposix -lpthread perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-R/home/cpan/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int/CORE' cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
