This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear CAPTTOFU, This is a computer-generated error report created automatically by CPANPLUS, version 0.77_07. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sun Mar 25 20:25:04 2007] Trying to get 'http://www.cpan.org/authors/id/C/CA/CAPTTOFU/DBD-mysql-4.004.tar.gz' [MSG] [Sun Mar 25 20:25:08 2007] Trying to get 'http://www.cpan.org/authors/id/C/CA/CAPTTOFU/CHECKSUMS' [MSG] [Sun Mar 25 20:25:09 2007] Checksum matches for 'DBD-mysql-4.004.tar.gz' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/ChangeLog' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/constants.h' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/dbdimp.c' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/dbdimp.h' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/eg/' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/eg/prepare_memory_usage.pl' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/eg/proc_example1.pl' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/eg/proc_example2.pl' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/eg/proc_example3.pl' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/INSTALL.html' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/lib/' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/lib/Bundle/' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/lib/Bundle/DBD/' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/lib/Bundle/DBD/mysql.pm' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/lib/DBD/' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/lib/DBD/mysql/' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/lib/DBD/mysql/GetInfo.pm' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/lib/DBD/mysql/INSTALL.pod' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/lib/DBD/mysql.pm' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/Makefile.PL' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/Makefile.PL.embedded' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/MANIFEST' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/MANIFEST.SKIP' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/META.yml' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/myld' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/mysql.xs' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/README' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/00base.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/10connect.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/20createdrop.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/30insertfetch.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/35limit.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/35prepare.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/40bindparam.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/40bindparam2.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/40blobs.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/40catalog.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/40listfields.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/40nulls.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/40numrows.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/41bindparam.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/41blobs_prepare.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/42bindparam.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/50chopblanks.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/50commit.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/60leaks.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/70takeimp.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/75supported_sql.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/80procs.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/insertid.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/lib.pl' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/multi_statement.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/mysql.dbtest' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/param_values.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/prepare_noerror.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/texecute.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/t/utf8.t' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD-mysql-4.004/TODO' [MSG] [Sun Mar 25 20:25:09 2007] Extracted 'DBD::mysql' to '/opt/perl/testers/.cpanplus/5.8.8/build/DBD-mysql-4.004' [MSG] [Sun Mar 25 20:25:19 2007] I will use the following settings for compiling and testing: cflags (mysql_config) = -I/usr/include/mysql -g embedded (mysql_config) = libs (mysql_config) = -L/usr/lib/mysql -lmysqlclient -lz -lcrypt -lnsl -lm mysql_config (guessed ) = mysql_config nocatchstderr (default ) = 0 nofoundrows (default ) = 0 ssl (guessed ) = 0 testdb (default ) = test testhost (default ) = testpassword (default ) = testsocket (default ) = testuser (default ) = To change these settings, see 'perl Makefile.PL --help' and 'perldoc INSTALL'. Checking if your kit is complete... Looks good Using DBI 1.54 (for perl 5.008008 on x86_64-linux-thread-multi-ld) installed in /opt/perl/testers/.cpanplus/5.8.8/build/DBI-1.54/blib/arch/auto/DBI/ Writing Makefile for DBD::mysql [MSG] [Sun Mar 25 20:25:19 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sun Mar 25 20:25:19 2007] Module 'DBD::mysql' requires 'DBI' version '1.08' to be installed [MSG] [Sun Mar 25 20:25:25 2007] *** You are using a perl configured with threading enabled. *** You should be aware that using multiple threads is *** not recommended for production environments. *** Note: The optional PlRPC-modules (RPC::PlServer etc) are not installed. If you want to use the DBD::Proxy driver and DBI::ProxyServer modules, then you'll need to install the RPC::PlServer, RPC::PlClient, Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you. You can install them any time after installing the DBI. You do *not* need these modules for typical DBI usage. Optional modules are available from any CPAN mirror, in particular http://search.cpan.org/ http://www.perl.com/CPAN/modules/by-module http://www.perl.org/CPAN/modules/by-module ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module Your perl was compiled with gcc (version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13sarge1)), okay. Creating test wrappers for DBI::PurePerl: t/zvp_01basics.t t/zvp_02dbidrv.t t/zvp_03handle.t t/zvp_04mods.t t/zvp_05thrclone.t (use threads) t/zvp_06attrs.t t/zvp_07kids.t t/zvp_08keeperr.t t/zvp_09trace.t t/zvp_10examp.t t/zvp_11fetch.t t/zvp_12quote.t t/zvp_13taint.t t/zvp_14utf8.t t/zvp_15array.t t/zvp_19fhtrace.t t/zvp_20meta.t t/zvp_30subclass.t t/zvp_40profile.t t/zvp_41prof_dump.t t/zvp_42prof_data.t t/zvp_43prof_env.t t/zvp_50dbm.t t/zvp_60preparse.t t/zvp_65transact.t t/zvp_70callbacks.t t/zvp_72childhandles.t t/zvp_80proxy.t t/zvp_85gofer.t Creating test wrappers for DBD::Gofer: t/zvg_01basics.t t/zvg_02dbidrv.t t/zvg_03handle.t t/zvg_04mods.t t/zvg_05thrclone.t (use threads) t/zvg_06attrs.t t/zvg_07kids.t t/zvg_08keeperr.t t/zvg_09trace.t t/zvg_10examp.t t/zvg_11fetch.t t/zvg_12quote.t t/zvg_13taint.t t/zvg_14utf8.t t/zvg_15array.t t/zvg_19fhtrace.t t/zvg_20meta.t t/zvg_30subclass.t t/zvg_40profile.t t/zvg_41prof_dump.t t/zvg_42prof_data.t t/zvg_43prof_env.t t/zvg_50dbm.t t/zvg_60preparse.t t/zvg_65transact.t t/zvg_70callbacks.t t/zvg_72childhandles.t t/zvg_80proxy.t t/zvg_85gofer.t Creating test wrappers for PurePerl & Gofer: t/zvxgp_01basics.t t/zvxgp_02dbidrv.t t/zvxgp_03handle.t t/zvxgp_04mods.t t/zvxgp_05thrclone.t (use threads) t/zvxgp_06attrs.t t/zvxgp_07kids.t t/zvxgp_08keeperr.t t/zvxgp_09trace.t t/zvxgp_10examp.t t/zvxgp_11fetch.t t/zvxgp_12quote.t t/zvxgp_13taint.t t/zvxgp_14utf8.t t/zvxgp_15array.t t/zvxgp_19fhtrace.t t/zvxgp_20meta.t t/zvxgp_30subclass.t t/zvxgp_40profile.t t/zvxgp_41prof_dump.t t/zvxgp_42prof_data.t t/zvxgp_43prof_env.t t/zvxgp_50dbm.t t/zvxgp_60preparse.t t/zvxgp_65transact.t t/zvxgp_70callbacks.t t/zvxgp_72childhandles.t t/zvxgp_80proxy.t t/zvxgp_85gofer.t I see you're using perl 5.008008 on x86_64-linux-thread-multi-ld, okay. Remember to actually *read* the README file! Use 'make' to build the software (dmake or nmake on Windows). Then 'make test' to execute self tests. Then 'make install' to install the DBI and then delete this working directory before unpacking and building any DBD::* drivers. Writing Makefile for DBI [MSG] [Sun Mar 25 20:25:37 2007] Running Mkbootstrap for DBI () Manifying blib/man1/dbiprof.1 Manifying blib/man1/dbiproxy.1 Manifying blib/man3/DBI::Gofer::Response.3 Manifying blib/man3/DBD::Proxy.3 Manifying blib/man3/DBI::Gofer::Transport::Base.3 Manifying blib/man3/DBI::Gofer::Transport::mod_perl.3 Manifying blib/man3/DBD::DBM.3 Manifying blib/man3/DBI::Const::GetInfoType.3 Manifying blib/man3/Roadmap.3 Manifying blib/man3/DBI::DBD::Metadata.3 Manifying blib/man3/DBI::Const::GetInfo::ODBC.3 Manifying blib/man3/DBD::Gofer::Transport::pipeone.3 Manifying blib/man3/DBI::ProfileDumper::Apache.3 Manifying blib/man3/DBD::File.3 Manifying blib/man3/DBI::ProfileSubs.3 Manifying blib/man3/DBD::Gofer.3 Manifying blib/man3/DBD::Gofer::Transport::http.3 Manifying blib/man3/DBD::Gofer::Transport::Base.3 Manifying blib/man3/DBI::FAQ.3 Manifying blib/man3/DBD::Gofer::Policy::rush.3 Manifying blib/man3/DBI::SQL::Nano.3 Manifying blib/man3/DBI::Gofer::Request.3 Manifying blib/man3/DBI::Const::GetInfo::ANSI.3 Manifying blib/man3/DBD::Gofer::Transport::stream.3 Manifying blib/man3/DBD::Gofer::Policy::classic.3 Manifying blib/man3/DBI::Gofer::Transport::stream.3 Manifying blib/man3/DBI.3 Manifying blib/man3/DBD::Gofer::Policy::Base.3 Manifying blib/man3/DBI::Const::GetInfoReturn.3 Manifying blib/man3/DBD::Sponge.3 Manifying blib/man3/DBD::Gofer::Policy::pedantic.3 Manifying blib/man3/DBI::Gofer::Transport::pipeone.3 Manifying blib/man3/DBI::W32ODBC.3 Manifying blib/man3/DBD::Gofer::Transport::null.3 Manifying blib/man3/Bundle::DBI.3 Manifying blib/man3/TASKS.3 Manifying blib/man3/DBI::Profile.3 Manifying blib/man3/DBI::ProfileDumper.3 Manifying blib/man3/DBI::ProxyServer.3 Manifying blib/man3/DBI::Gofer::Execute.3 Manifying blib/man3/DBI::DBD.3 Manifying blib/man3/Win32::DBIODBC.3 Manifying blib/man3/DBI::PurePerl.3 Manifying blib/man3/DBI::ProfileData.3 [MSG] [Sun Mar 25 20:27:33 2007] MAKE TEST passed: t/01basics................ok 4/132 skipped: various reasons t/02dbidrv................ok t/03handle................ok t/04mods..................ok t/05thrclone..............ok t/06attrs.................ok t/07kids..................ok t/08keeperr...............ok t/09trace.................ok t/10examp.................ok t/11fetch.................ok t/12quote.................ok t/13taint.................ok t/14utf8..................ok t/15array.................ok t/19fhtrace...............ok t/20meta..................ok t/30subclass..............ok t/40profile...............ok t/41prof_dump.............ok t/42prof_data.............ok t/43prof_env..............ok t/50dbm...................ok t/60preparse..............ok t/65transact..............ok t/70callbacks.............ok t/72childhandles..........ok t/80proxy.................skipped all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm) t/85gofer.................ok t/pod.....................ok t/zvg_01basics............ok 4/132 skipped: various reasons t/zvg_02dbidrv............ok t/zvg_03handle............ok 44/137 skipped: various reasons t/zvg_04mods..............ok t/zvg_05thrclone.......... You can ignore the 10 'Scalars leaked' messages you may see here (or send me a patch to fix the underlying problem) Scalars leaked: 1 Scalars leaked: 1 Scalars leaked: 1 Scalars leaked: 1 Scalars leaked: 1 Scalars leaked: 1 Scalars leaked: 1 Scalars leaked: 1 Scalars leaked: 1 Scalars leaked: 1 ok t/zvg_06attrs.............ok t/zvg_07kids..............ok t/zvg_08keeperr...........ok t/zvg_09trace.............ok t/zvg_10examp.............ok t/zvg_11fetch.............ok t/zvg_12quote.............ok t/zvg_13taint.............skipped all skipped: Taint attribute tests not functional with DBI_AUTOPROXY t/zvg_14utf8..............ok t/zvg_15array.............ok t/zvg_19fhtrace...........ok t/zvg_20meta..............ok t/zvg_30subclass..........ok t/zvg_40profile...........ok t/zvg_41prof_dump.........ok t/zvg_42prof_data.........ok t/zvg_43prof_env..........ok t/zvg_50dbm...............ok 2/12 skipped: various reasons t/zvg_60preparse..........ok t/zvg_65transact..........skipped all skipped: Transactions not supported by DBD::Gofer t/zvg_70callbacks.........ok t/zvg_72childhandles......ok 2/14 skipped: various reasons t/zvg_80proxy.............skipped all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm) t/zvg_85gofer.............ok t/zvp_01basics............ok 4/132 skipped: various reasons t/zvp_02dbidrv............ok 10/51 skipped: various reasons t/zvp_03handle............ok 76/137 skipped: various reasons t/zvp_04mods..............ok t/zvp_05thrclone..........ok t/zvp_06attrs.............ok 7/137 skipped: various reasons t/zvp_07kids..............skipped all skipped: $h->{Kids} attribute not supported for DBI::PurePerl t/zvp_08keeperr...........ok t/zvp_09trace.............ok t/zvp_10examp.............ok 3/204 skipped: various reasons t/zvp_11fetch.............ok t/zvp_12quote.............ok t/zvp_13taint.............skipped all skipped: Taint attributes not supported with DBI::PurePerl t/zvp_14utf8..............ok t/zvp_15array.............ok t/zvp_19fhtrace...........ok t/zvp_20meta..............ok t/zvp_30subclass..........ok t/zvp_40profile...........skipped all skipped: profiling not supported for DBI::PurePerl t/zvp_41prof_dump.........skipped all skipped: profiling not supported for DBI::PurePerl t/zvp_42prof_data.........skipped all skipped: profiling not supported for DBI::PurePerl t/zvp_43prof_env..........skipped all skipped: profiling not supported for DBI::PurePerl t/zvp_50dbm...............ok t/zvp_60preparse..........skipped all skipped: preparse not supported for DBI::PurePerl t/zvp_65transact..........ok t/zvp_70callbacks.........skipped all skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl t/zvp_72childhandles......ok t/zvp_80proxy.............skipped all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm) t/zvp_85gofer.............ok t/zvxgp_01basics..........ok 4/132 skipped: various reasons t/zvxgp_02dbidrv..........ok 10/51 skipped: various reasons t/zvxgp_03handle..........ok 76/137 skipped: various reasons t/zvxgp_04mods............ok t/zvxgp_05thrclone........ok t/zvxgp_06attrs...........ok 7/137 skipped: various reasons t/zvxgp_07kids............skipped all skipped: $h->{Kids} attribute not supported for DBI::PurePerl t/zvxgp_08keeperr.........ok t/zvxgp_09trace...........ok t/zvxgp_10examp...........ok 3/204 skipped: various reasons t/zvxgp_11fetch...........ok t/zvxgp_12quote...........ok t/zvxgp_13taint...........skipped all skipped: Taint attributes not supported with DBI::PurePerl t/zvxgp_14utf8............ok t/zvxgp_15array...........ok t/zvxgp_19fhtrace.........ok t/zvxgp_20meta............ok t/zvxgp_30subclass........ok t/zvxgp_40profile.........skipped all skipped: profiling not supported for DBI::PurePerl t/zvxgp_41prof_dump.......skipped all skipped: profiling not supported for DBI::PurePerl t/zvxgp_42prof_data.......skipped all skipped: profiling not supported for DBI::PurePerl t/zvxgp_43prof_env........skipped all skipped: profiling not supported for DBI::PurePerl t/zvxgp_50dbm.............ok 2/12 skipped: various reasons t/zvxgp_60preparse........skipped all skipped: preparse not supported for DBI::PurePerl t/zvxgp_65transact........skipped all skipped: Transactions not supported by DBD::Gofer t/zvxgp_70callbacks.......skipped all skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl t/zvxgp_72childhandles....ok 2/14 skipped: various reasons t/zvxgp_80proxy...........skipped all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm) t/zvxgp_85gofer...........ok All tests successful, 23 tests and 260 subtests skipped. Files=117, Tests=5345, 114 wallclock secs (82.16 cusr + 27.92 csys = 110.08 CPU) test.pl DBI test application $Revision: 8812 $ Switch: DBI 1.54 by Tim Bunce, 1.54 Available Drivers: DBM, ExampleP, File, Gofer, Proxy, SQLite, Sponge dbi:ExampleP:: testing 5 sets of 20 connections: Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Disconnecting... Made 100 connections in 0 wallclock secs ( 0.02 usr + 0.00 sys = 0.02 CPU) Testing handle creation speed... 9803 NullP sth/s perl 5.008008 x86_64-linux-thread-multi-ld (gcc 3.4.4 -g -O3) 0.000102s test.pl done [MSG] [Sun Mar 25 20:27:33 2007] Ok, not sending test report [MSG] [Sun Mar 25 20:27:40 2007] cp lib/DBD/mysql.pm blib/lib/DBD/mysql.pm cp lib/DBD/mysql/GetInfo.pm blib/lib/DBD/mysql/GetInfo.pm cp lib/DBD/mysql/INSTALL.pod blib/lib/DBD/mysql/INSTALL.pod cp lib/Bundle/DBD/mysql.pm blib/lib/Bundle/DBD/mysql.pm Running Mkbootstrap for DBD::mysql () Warning: duplicate function definition 'do' detected in mysql.xs, line 225 Warning: duplicate function definition 'rows' detected in mysql.xs, line 612 mysql.xs: In function `XS_DBD__mysql__db_do': mysql.xs:315: warning: comparison is always false due to limited range of data type mysql.xs:316: warning: comparison is always false due to limited range of data type Manifying blib/man3/DBD::mysql.3 Manifying blib/man3/DBD::mysql::INSTALL.3 Manifying blib/man3/Bundle::DBD::mysql.3 [ERROR] [Sun Mar 25 20:27:47 2007] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/00base.............ok t/10connect..........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/10connect.t line 25 # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-2 Failed 2/2 tests, 0.00% okay t/20createdrop.......DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/20createdrop.t line 21 # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-4 Failed 4/4 tests, 0.00% okay t/30insertfetch......DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/30insertfetch.t line 21 # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-9 Failed 9/9 tests, 0.00% okay t/35limit............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/35limit.t line 24 # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-111 Failed 111/111 tests, 0.00% okay t/35prepare..........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/35prepare.t line 35 dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-40 Failed 40/40 tests, 0.00% okay t/40bindparam........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40bindparam.t line 57 dubious Test returned status 255 (wstat 65280, 0xff00) t/40bindparam2.......DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40bindparam2.t line 64 Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO) Either your server is not up and running or you have no permissions for acessing the DSN DBI:mysql:test. This test requires a running server and write permissions. Please make sure your server is running and you have permissions, then retry. dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-13 Failed 13/13 tests, 0.00% okay t/40blobs............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40blobs.t line 64 Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO) Either your server is not up and running or you have no permissions for acessing the DSN DBI:mysql:test. This test requires a running server and write permissions. Please make sure your server is running and you have permissions, then retry. dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-11 Failed 11/11 tests, 0.00% okay t/40catalog..........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40catalog.t line 23 # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) t/40listfields.......DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40listfields.t line 57 Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO) Either your server is not up and running or you have no permissions for acessing the DSN DBI:mysql:test. This test requires a running server and write permissions. Please make sure your server is running and you have permissions, then retry. dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-19 Failed 19/19 tests, 0.00% okay t/40nulls............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40nulls.t line 50 Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO) Either your server is not up and running or you have no permissions for acessing the DSN DBI:mysql:test. This test requires a running server and write permissions. Please make sure your server is running and you have permissions, then retry. dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-11 Failed 11/11 tests, 0.00% okay t/40numrows..........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40numrows.t line 59 Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO) Either your server is not up and running or you have no permissions for acessing the DSN DBI:mysql:test. This test requires a running server and write permissions. Please make sure your server is running and you have permissions, then retry. dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-25 Failed 25/25 tests, 0.00% okay t/41bindparam........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/41bindparam.t line 37 dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-11 Failed 11/11 tests, 0.00% okay t/41blobs_prepare....DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/41blobs_prepare.t line 71 Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO) Either your server is not up and running or you have no permissions for acessing the DSN DBI:mysql:test. This test requires a running server and write permissions. Please make sure your server is running and you have permissions, then retry. dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-24 Failed 24/24 tests, 0.00% okay t/42bindparam........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/42bindparam.t line 37 dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-11 Failed 11/11 tests, 0.00% okay t/50chopblanks.......DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/50chopblanks.t line 57 Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO) Either your server is not up and running or you have no permissions for acessing the DSN DBI:mysql:test. This test requires a running server and write permissions. Please make sure your server is running and you have permissions, then retry. dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 1-35 Failed 35/35 tests, 0.00% okay t/50commit...........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/50commit.t line 64 Can't call method "tables" on an undefined value at t/lib.pl line 234. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-30 Failed 30/30 tests, 0.00% okay t/60leaks............skipped all skipped: $ENV{SLOW_TESTS} is not set t/70takeimp..........skipped all skipped: test feature not implemented t/75supported_sql....DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/75supported_sql.t line 35 dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-17 Failed 17/17 tests, 0.00% okay t/80procs............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/80procs.t line 32 dubious Test returned status 255 (wstat 65280, 0xff00) t/insertid...........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/insertid.t line 14 dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-16 Failed 16/16 tests, 0.00% okay t/multi_statement....DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/multi_statement.t line 21 # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-7 Failed 7/7 tests, 0.00% okay t/param_values.......DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/param_values.t line 16 Can't call method "tables" on an undefined value at t/lib.pl line 234. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-8 Failed 8/8 tests, 0.00% okay t/prepare_noerror....DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/prepare_noerror.t line 22 Can't call method "prepare" on an undefined value at t/prepare_noerror.t line 25. dubious Test returned status 255 (wstat 65280, 0xff00) t/texecute...........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/texecute.t line 17 Can't call method "tables" on an undefined value at t/lib.pl line 234. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-9 Failed 9/9 tests, 0.00% okay t/utf8...............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/utf8.t line 49 dubious Test returned status 255 (wstat 65280, 0xff00) Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/10connect.t 255 65280 2 4 1-2 t/20createdrop.t 255 65280 4 8 1-4 t/30insertfetch.t 255 65280 9 18 1-9 t/35limit.t 255 65280 111 222 1-111 t/35prepare.t 255 65280 40 80 1-40 t/40bindparam.t 255 65280 ?? ?? ?? t/40bindparam2.t 10 2560 13 25 1-13 t/40blobs.t 10 2560 11 21 1-11 t/40catalog.t 255 65280 ?? ?? ?? t/40listfields.t 10 2560 19 37 1-19 t/40nulls.t 10 2560 11 21 1-11 t/40numrows.t 10 2560 25 49 1-25 t/41bindparam.t 255 65280 11 22 1-11 t/41blobs_prepare.t 10 2560 24 47 1-24 t/42bindparam.t 255 65280 11 22 1-11 t/50chopblanks.t 10 2560 35 69 1-35 t/50commit.t 255 65280 30 59 1-30 t/75supported_sql.t 255 65280 17 34 1-17 t/80procs.t 255 65280 ?? ?? ?? t/insertid.t 255 65280 16 32 1-16 t/multi_statement.t 255 65280 7 14 1-7 t/param_values.t 255 65280 8 15 1-8 t/prepare_noerror.t 255 65280 ?? ?? ?? t/texecute.t 255 65280 9 17 1-9 t/utf8.t 255 65280 ?? ?? ?? 2 tests skipped. Failed 25/28 test scripts. 413/418 subtests failed. Files=28, Tests=418, 7 wallclock secs ( 4.15 cusr + 2.07 csys = 6.22 CPU) Failed 25/28 test programs. 413/418 subtests failed. make: PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: DBI 1.54 1.08 Data::Dumper 2.121_08 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.16.29, archname=x86_64-linux-thread-multi-ld uname='linux rinse 2.6.16.29 #1 smp sun nov 5 23:08:05 cst 2006 x86_64 gnulinux ' config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true [EMAIL PROTECTED]' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g -O3', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.4 20050314 (prerelease) (Debian 3.4.3-13sarge1)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8 alignbytes=16, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.2.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.2' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE' cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
