This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear JZHANG, This is a computer-generated error report created automatically by CPANPLUS, version 0.076. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Fri Mar 30 00:23:34 2007] Trying to get 'http://www.cpan.org/authors/id/J/JZ/JZHANG/HTML-ContentExtractor-0.01.tar.gz' [ERROR] [Fri Mar 30 00:23:36 2007] Fetching of 'http://www.cpan.org/authors/id/J/JZ/JZHANG/HTML-ContentExtractor-0.01.tar.gz' failed: Command failed: [MSG] [Fri Mar 30 00:23:36 2007] Trying to get 'ftp://ftp.mirror.ac.uk/sites/ftp.funet.fi/pub/languages/perl/CPAN/authors/id/J/JZ/JZHANG/HTML-ContentExtractor-0.01.tar.gz' [MSG] [Fri Mar 30 00:23:37 2007] Trying to get 'http://www.cpan.org/authors/id/J/JZ/JZHANG/CHECKSUMS' [MSG] [Fri Mar 30 00:23:37 2007] Archive size is not known for 'HTML-ContentExtractor-0.01.tar.gz' [MSG] [Fri Mar 30 00:23:37 2007] No 'md5' checksum known for 'HTML-ContentExtractor-0.01.tar.gz' [MSG] [Fri Mar 30 00:23:38 2007] Extracted 'HTML-ContentExtractor-0.01' [MSG] [Fri Mar 30 00:23:38 2007] Extracted 'HTML-ContentExtractor-0.01/t' [MSG] [Fri Mar 30 00:23:38 2007] Extracted 'HTML-ContentExtractor-0.01/t/boilerplate.t' [MSG] [Fri Mar 30 00:23:38 2007] Extracted 'HTML-ContentExtractor-0.01/t/pod-coverage.t' [MSG] [Fri Mar 30 00:23:38 2007] Extracted 'HTML-ContentExtractor-0.01/t/00-load.t' [MSG] [Fri Mar 30 00:23:38 2007] Extracted 'HTML-ContentExtractor-0.01/t/pod.t' [MSG] [Fri Mar 30 00:23:38 2007] Extracted 'HTML-ContentExtractor-0.01/META.yml' [MSG] [Fri Mar 30 00:23:38 2007] Extracted 'HTML-ContentExtractor-0.01/lib' [MSG] [Fri Mar 30 00:23:38 2007] Extracted 'HTML-ContentExtractor-0.01/lib/HTML' [MSG] [Fri Mar 30 00:23:38 2007] Extracted 'HTML-ContentExtractor-0.01/lib/HTML/ContentExtractor.pm' [MSG] [Fri Mar 30 00:23:38 2007] Extracted 'HTML-ContentExtractor-0.01/Changes' [MSG] [Fri Mar 30 00:23:38 2007] Extracted 'HTML-ContentExtractor-0.01/MANIFEST' [MSG] [Fri Mar 30 00:23:38 2007] Extracted 'HTML-ContentExtractor-0.01/Makefile.PL' [MSG] [Fri Mar 30 00:23:38 2007] Extracted 'HTML-ContentExtractor-0.01/README' [MSG] [Fri Mar 30 00:23:38 2007] Extracted 'HTML::ContentExtractor' to '/home/chris/.cpanplus/5.8.8/build/HTML-ContentExtractor-0.01' [MSG] [Fri Mar 30 00:23:39 2007] Checking if your kit is complete... Looks good Writing Makefile for HTML::ContentExtractor [MSG] [Fri Mar 30 00:23:39 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Mar 30 00:23:40 2007] cp lib/HTML/ContentExtractor.pm blib/lib/HTML/ContentExtractor.pm Manifying blib/man3/HTML::ContentExtractor.3 [ERROR] [Fri Mar 30 00:23:41 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/chris/dev/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00-load.........# Testing HTML::ContentExtractor 0.01, Perl 5.008008, /home/chris/dev/perl588/bin/perl ok t/boilerplate..... # Failed test 'README contains boilerplate text' # at t/boilerplate.t line 23. # The README is used... appears on lines 3 # 'version information here' appears on lines 11 # Failed test 'Changes contains boilerplate text' # at t/boilerplate.t line 23. # placeholder date/time appears on lines 3 dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED tests 1-2 Failed 2/3 tests, 33.33% okay t/pod-coverage....# Looks like you failed 2 tests of 3. # Failed test 'Pod coverage on HTML::ContentExtractor' # at /home/chris/dev/perl588/lib/site_perl/5.8.8/Test/Pod/Coverage.pm line 126. # Coverage for HTML::ContentExtractor is 45.0%, with 11 naked subroutines: # Heuristic_Remove # PreprocessForFragmentIdentifiedPage # Table_Remove # check_if_index # count_words_num # how_many_links # is_index # links_count # nonlink_words # remove_crap # to_text # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/pod.............skipped all skipped: Test::Pod 1.14 required for testing POD Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/boilerplate.t 2 512 3 2 1-2 t/pod-coverage.t 1 256 1 1 1 1 test skipped. Failed 2/4 test scripts. 3/5 subtests failed. Files=4, Tests=5, 1 wallclock secs ( 0.86 cusr + 0.09 csys = 0.95 CPU) Failed 2/4 test programs. 3/5 subtests failed. gmake: *** [test_dynamic] Error 25 PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: HTML::TreeBuilder 3.23 Test::More 0.67 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /usr/bin:/bin:/usr/pkg/bin:/usr/local/bin:/usr/X11R6/bin PERL5LIB = :/home/chris/.cpanplus/5.8.8/build/HTML-ContentExtractor-0.01/blib/lib:/home/chris/.cpanplus/5.8.8/build/HTML-ContentExtractor-0.01/blib/arch:/home/chris/.cpanplus/5.8.8/build/HTML-ContentExtractor-0.01/blib PERL5_CPANPLUS_IS_RUNNING = 21724 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/pkg/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/chris/dev/perl588/bin/perl UID: $< = 1001 EUID: $> = 1001 GID: $( = 100 0 100 EGID: $) = 100 0 100 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=netbsd, osvers=3.0, archname=i386-netbsd-thread-multi-64int uname='netbsd canker.bingosnet.co.uk 3.0 netbsd 3.0 (generic_laptop) #0: mon dec 19 01:08:52 utc 2005 [EMAIL PROTECTED]:homebuildsabnetbsd-3-0-releasei386200512182024z-objhomebuildsabnetbsd-3-0-releasesrcsysarchi386compilegeneric_laptop i386 ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include', optimize='-O', cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include' ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib' libpth=/usr/pkg/lib /lib /usr/lib libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E ' cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
