This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear David Davis, This is a computer-generated error report created automatically by CPANPLUS, version 0.78. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Tue Apr 17 10:09:27 2007] Checking if source files are up to date [MSG] [Tue Apr 17 10:09:27 2007] Retrieving /home/maddingue/.cpanplus/sourcefiles.2.16.stored [MSG] [Tue Apr 17 10:09:28 2007] Trying to get 'file://mnt/video/MiniCPAN/authors/id/X/XA/XANTUS/CHECKSUMS' [MSG] [Tue Apr 17 10:09:28 2007] Checksum matches for 'POE-Filter-JSON-0.02.tar.gz' [MSG] [Tue Apr 17 10:09:28 2007] Extracted 'POE-Filter-JSON-0.02/' [MSG] [Tue Apr 17 10:09:28 2007] Extracted 'POE-Filter-JSON-0.02/META.yml' [MSG] [Tue Apr 17 10:09:28 2007] Extracted 'POE-Filter-JSON-0.02/t/' [MSG] [Tue Apr 17 10:09:28 2007] Extracted 'POE-Filter-JSON-0.02/t/01_filter.t' [MSG] [Tue Apr 17 10:09:28 2007] Extracted 'POE-Filter-JSON-0.02/t/00_compile.t' [MSG] [Tue Apr 17 10:09:28 2007] Extracted 'POE-Filter-JSON-0.02/Changes' [MSG] [Tue Apr 17 10:09:28 2007] Extracted 'POE-Filter-JSON-0.02/MANIFEST' [MSG] [Tue Apr 17 10:09:28 2007] Extracted 'POE-Filter-JSON-0.02/lib/' [MSG] [Tue Apr 17 10:09:28 2007] Extracted 'POE-Filter-JSON-0.02/lib/POE/' [MSG] [Tue Apr 17 10:09:28 2007] Extracted 'POE-Filter-JSON-0.02/lib/POE/Filter/' [MSG] [Tue Apr 17 10:09:28 2007] Extracted 'POE-Filter-JSON-0.02/lib/POE/Filter/JSON.pm' [MSG] [Tue Apr 17 10:09:28 2007] Extracted 'POE-Filter-JSON-0.02/Makefile.PL' [MSG] [Tue Apr 17 10:09:28 2007] Extracted 'POE-Filter-JSON-0.02/README' [MSG] [Tue Apr 17 10:09:29 2007] Extracted 'POE::Filter::JSON' to '/home/maddingue/.cpanplus/5.8.5/build/POE-Filter-JSON-0.02' [MSG] [Tue Apr 17 10:09:29 2007] Writing Makefile for POE::Filter::JSON [MSG] [Tue Apr 17 10:09:29 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Tue Apr 17 10:09:29 2007] Manifying blib/man3/POE::Filter::JSON.3pm [ERROR] [Tue Apr 17 10:09:29 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /usr/bin/perl5.8.5 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_compile....ok t/01_filter.....dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 3-5 Failed 3/5 tests, 40.00% okay Failed Test Stat Wstat Total Fail List of Failed --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- t/01_filter.t 255 65280 5 6 3-5 Failed 1/2 test scripts. 3/6 subtests failed. Files=2, Tests=6, 0 wallclock secs ( 0.10 cusr + 0.02 csys = 0.12 CPU) Pseudo-hashes are deprecated at /usr/lib/perl5/site_perl/5.8.5/JSON/Any.pm line 252. Can't coerce array into hash at /usr/lib/perl5/site_perl/5.8.5/JSON/Any.pm line 252. # Looks like you planned 5 tests but only ran 2. # Looks like your test died just after 2. Failed 1/2 test programs. 3/6 subtests failed. make: *** [test_dynamic] Erreur 255 PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Carp 1.03 0.0 JSON::Any 1.03 1.03 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: -- Summary of my perl5 (revision 5 version 8 subversion 5) configuration: Platform: osname=linux, osvers=2.6.3-25mdk-i686-up-4gb, archname=i386-linux-thread-multi uname='linux mercury.mandriva.com 2.6.3-25mdk-i686-up-4gb #1 fri jan 14 03:39:39 mst 2005 i686 intel(r) pentium(r) 4 cpu 3.00ghz unknown gnulinux ' config_args='-des -Dinc_version_list=5.8.4/i386-linux-thread-multi 5.8.4 5.8.3/i386-linux-thread-multi 5.8.3 5.8.2/i386-linux-thread-multi 5.8.2 5.8.1/i386-linux-thread-multi 5.8.1 5.8.0/i386-linux-thread-multi 5.8.0 5.6.1 5.6.0 -Darchname=i386-linux -Dcc=gcc -Doptimize=-O2 -fomit-frame-pointer -pipe -march=i586 -mtune=pentiumpro -Dprefix=/usr -Dvendorprefix=/usr -Dsiteprefix=/usr -Dman3ext=3pm -Dcf_by=Mandrakesoft -Dmyhostname=localhost [EMAIL PROTECTED] -Dd_dosuid -Ud_csh -Duseshrplib -Accflags=-DPERL_DISABLE_PMC -Dusethreads' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DPERL_DISABLE_PMC -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm', optimize='-O2 -fomit-frame-pointer -pipe -march=i586 -mtune=pentiumpro ', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DPERL_DISABLE_PMC -fno-strict-aliasing -pipe -I/usr/local/include -I/usr/include/gdbm' ccversion='', gccversion='3.4.1 (Mandrakelinux 10.1 3.4.1-4mdk)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lndbm -lgdbm -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.3.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.3' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.5/i386-linux-thread-multi/CORE' cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
