Hello Salve,
thank you for your careful testing and your suggestions. I hope I can
publish an update within a week, with tests that pass under CPAN 1.90.
Jochen
> This distribution has been tested as part of the cpan-testers
> effort to test as many new uploads to CPAN as possible. See
> http://testers.cpan.org/
>
> Please cc any replies to [email protected] to keep other
> test volunteers informed and to prevent any duplicate effort.
>
> --
> Dear Jochen Stenzel,
>
> This is a computer-generated test report for Getopt-ArgvFile-1.10, created
> automatically by CPAN::Reporter, version 0.41, and sent to the CPAN
> Testers mailing list. If you have received this email directly, it is
> because the person testing your distribution chose to send a copy to your
> CPAN email address; there may be a delay before the official report is
> received and processed by CPAN Testers.
>
> Thank you for uploading your work to CPAN. However, it appears that
> there were some problems testing your distribution.
>
> Sections of this report:
>
> * Tester comments
> * Prerequisites
> * Environment and other context
> * Test output
>
> ------------------------------
> TESTER COMMENTS
> ------------------------------
>
> Additional comments from tester:
>
> This is from the CPAN.pm v1.90 Changes file:
>
> * release 1.88_59
>
> * Note: the build_dir has got a major reworking with regard to how
> individual directories below it are being named. The names are now
> generated by File::Temp and contain a random part. This has the
> advantage that concurring users of CPAN.pm cannot disturb each other and
> the disadvantage that it is more difficult to identify which directory
> contains which build environment. If YAML is installed, then each
> directory is accompanied by a YAML file that stores a lot of state about
> the directory.
>
> The filename of the YAML file is C<< <directoryname>.yml >>
>
> Hope this helps you make that test work again! :-)
>
>
>
>
> ------------------------------
> PREREQUISITES
> ------------------------------
>
> Prerequisite modules loaded:
>
> requires:
>
> Module Need Have
> ---------------- ---- ----
> Test::Harness 1.25 2.64
> Test::More 0.11 0.64
> Text::ParseWords 3.1 3.24
>
> ------------------------------
> ENVIRONMENT AND OTHER CONTEXT
> ------------------------------
>
> Environment variables:
>
> LANG = en_US.ISO8859-1
> LC_ADDRESS = no_NO.ISO8859-1
> LC_COLLATE = no_NO.ISO8859-1
> LC_IDENTIFICATION = no_NO.ISO8859-1
> LC_MEASUREMENT = no_NO.ISO8859-1
> LC_NAME = no_NO.ISO8859-1
> LC_PAPER = no_NO.ISO8859-1
> LC_TELEPHONE = no_NO.ISO8859-1
> PATH =
> /home/salvejn/bin:/metno/local/bin:/usr/lib/qt-3.3/bin:/usr/bin:/bin:/usr/X11R6/bin:/sbin:/usr/sbin:/opt/bin:/usr/openv/netbackup/bin:/metno/local/bin:/opt/pgi-FC5/bin:/opt/lahey/bin:/opt/totalview/bin:/usr/local/ecaccess/client/tools:/usr/local/netcdf/bin:/usr/local/bin:/opt/oracle/OraHome1/bin:/usr/local/GrADS/bin:/usr/lib/ferret/bin:/opt/intel_fc/bin:/opt/intel_idb/bin:/usr/sbin
> PERL5LIB =
> PERL5_CPANPLUS_IS_RUNNING = 1
> PERL5_CPAN_IS_RUNNING = 1
> SHELL = /bin/bash
> TERM = xterm
>
> Perl special variables (and OS-specific diagnostics, for MSWin32):
>
> Perl: $^X = /usr/bin/perl
> UID: $< = 42923
> EUID: $> = 42923
> GID: $( = 42923 54500 54000 42923 17011
> EGID: $) = 42923 54500 54000 42923 17011
>
> Perl module toolchain versions installed:
>
> Module Have
> ------------------- ------
> CPAN 1.90
> Cwd 3.23
> ExtUtils::CBuilder 0.18
> ExtUtils::Command 1.12
> ExtUtils::Install 1.41
> ExtUtils::MakeMaker 6.31
> ExtUtils::Manifest 1.49
> ExtUtils::ParseXS 2.16
> File::Spec 3.12
> Module::Build 0.2801
> Module::Signature 0.55
> Test::Harness 2.64
> Test::More 0.64
> version 0.64
>
> ------------------------------
> TEST OUTPUT
> ------------------------------
>
> Output from '/usr/bin/make test':
>
> PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e"
> "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
> t/base.............ok
> t/expandenv........ok
> t/fileopt..........ok
> t/noHOMEvar........ok
> t/prefix...........ok
> t/resolvepathes....
> # Failed test in t/resolvepathes.t at line 67.
> # Structures begin differing at:
> # $got->[7] =
> '/home/salvejn/.cpan/build/Getopt-ArgvFile-1.10/t/file1'
> # $expected->[7] =
> '/home/salvejn/.cpan/build/Getopt-ArgvFile-1.10-z78WpP/t/file1'
> # Looks like you failed 1 test of 4.
> dubious
> Test returned status 1 (wstat 256, 0x100)
> DIED. FAILED test 4
> Failed 1/4 tests, 75.00% okay
> t/use1.............ok
> t/use2.............ok
> Failed Test Stat Wstat Total Fail List of Failed
> -------------------------------------------------------------------------------
> t/resolvepathes.t 1 256 4 1 4
> Failed 1/8 test scripts. 1/43 subtests failed.
> Files=8, Tests=43, 1 wallclock secs ( 0.50 cusr + 0.10 csys = 0.60 CPU)
> Failed 1/8 test programs. 1/43 subtests failed.
> make: *** [test_dynamic] Error 255
>
> --
>
> Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
> Platform:
> osname=linux, osvers=2.6.9-34.elsmp, archname=i386-linux-thread-multi
> uname='linux hs20-bc2-4.build.redhat.com 2.6.9-34.elsmp #1 smp fri feb 24
> 16:56:28 est 2006 i686 i686 i386 gnulinux '
> config_args='-des -Doptimize=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2
> -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386
> -mtune=generic -fasynchronous-unwind-tables -Dversion=5.8.8
> -Dmyhostname=localhost [EMAIL PROTECTED] -Dcc=gcc -Dcf_by=Red Hat, Inc.
> -Dinstallprefix=/usr -Dprefix=/usr -Darchname=i386-linux -Dvendorprefix=/usr
> -Dsiteprefix=/usr -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles
> -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog
> -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl=n -Ubincompat5005 -Uversiononly
> -Dpager=/usr/bin/less -isr -Dd_gethostent_r_proto -Ud_endhostent_r_proto
> -Ud_sethostent_r_proto -Ud_endprotoent_r_proto -Ud_setprotoent_r_proto
> -Ud_endservent_r_proto -Ud_setservent_r_proto -Dinc_version_list=5.8.7 5.8.6
> 5.8.5 5.8.4 5.8.3 -Dscriptdir=/usr/bin'
> hint=recommended, useposix=true, d_sigaction=define
> usethreads=define use5005threads=undef useithreads=define
> usemultiplicity=define
> useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
> use64bitint=undef use64bitall=undef uselongdouble=undef
> usemymalloc=n, bincompat5005=undef
> Compiler:
> cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
> -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE
> -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
> optimize='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
> -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic
> -fasynchronous-unwind-tables',
> cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
> -Wdeclaration-after-statement -I/usr/local/include -I/usr/include/gdbm'
> ccversion='', gccversion='4.1.1 20060525 (Red Hat 4.1.1-1)',
> gccosandvers=''
> intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
> d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
> ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
> lseeksize=8
> alignbytes=4, prototype=define
> Linker and Libraries:
> ld='gcc', ldflags =' -L/usr/local/lib'
> libpth=/usr/local/lib /lib /usr/lib
> libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
> perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
> libc=/lib/libc-2.4.so, so=so, useshrplib=true, libperl=libperl.so
> gnulibc_version='2.4'
> Dynamic Linking:
> dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E
> -Wl,-rpath,/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE'
> cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
>
