This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.
        
--

Dear BLBLACK,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.78. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Wed Apr 18 22:55:36 2007] Trying to get 
'http://www.cpan.org/authors/id/B/BL/BLBLACK/Class-C3-XS-0.01_01.tar.gz'
[MSG] [Wed Apr 18 22:55:37 2007] Trying to get 
'http://www.cpan.org/authors/id/B/BL/BLBLACK/CHECKSUMS'
[MSG] [Wed Apr 18 22:55:38 2007] Checksum matches for 
'Class-C3-XS-0.01_01.tar.gz'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/Build.PL'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/ChangeLog'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/lib/'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/lib/Class/'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/lib/Class/C3/'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 
'Class-C3-XS-0.01_01/lib/Class/C3/XS.pm'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 
'Class-C3-XS-0.01_01/lib/Class/C3/XS.xs'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/Makefile.PL'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/MANIFEST'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/META.yml'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/README'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/t/'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/t/00_load.t'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/t/01_MRO.t'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/t/02_MRO.t'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/t/03_MRO.t'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/t/04_MRO.t'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/t/05_MRO.t'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/t/lib/'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/t/lib/A.pm'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/t/lib/B.pm'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/t/lib/C.pm'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/t/lib/D.pm'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/t/lib/E.pm'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/t/lib/F.pm'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class-C3-XS-0.01_01/t/pod.t'
[MSG] [Wed Apr 18 22:55:39 2007] Extracted 'Class::C3::XS' to 
'/home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01'
[MSG] [Wed Apr 18 22:55:41 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Class::C3::XS

[MSG] [Wed Apr 18 22:55:41 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Wed Apr 18 22:55:44 2007] cp lib/Class/C3/XS.xs blib/lib/Class/C3/XS.xs
cp lib/Class/C3/XS.pm blib/lib/Class/C3/XS.pm

[ERROR] [Wed Apr 18 22:55:48 2007] MAKE TEST failed:  PERL_DL_NONLAZY=1 
/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 
'blib/arch')" t/*.t
t/00_load....
#   Failed test 'use Class::C3::XS;'
#   at t/00_load.t line 9.
#     Tried to use 'Class::C3::XS'.
#     Error:  Can't locate loadable object for module Class::C3::XS in @INC 
(@INC contains: /home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib/lib 
/home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib/arch 
/home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib 
/usr/libdata/perl5/i386-openbsd/5.8.8 
/usr/local/libdata/perl5/i386-openbsd/5.8.8 /usr/libdata/perl5/i386-openbsd 
/usr/libdata/perl5 /usr/local/libdata/perl5 
/usr/local/libdata/perl5/site_perl/i386-openbsd 
/usr/libdata/perl5/site_perl/i386-openbsd 
/usr/local/libdata/perl5/site_perl/i386-openbsd 
/usr/local/libdata/perl5/site_perl /usr/libdata/perl5/site_perl/i386-openbsd 
/usr/libdata/perl5/site_perl /usr/local/lib/perl5/site_perl . 
/usr/libdata/perl5/i386-openbsd/5.8.8 
/usr/local/libdata/perl5/i386-openbsd/5.8.8 /usr/libdata/perl5 
/usr/local/libdata/perl5 /usr/local/libdata/perl5/site_perl/i386-openbsd 
/usr/libdata/perl5/site_perl/i386-openbsd /usr/local/libdata/perl5/site_perl 
/usr/libdata/perl5/site_perl /usr/local/lib/perl5/site_perl .) at (eval 3) line 
2
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at t/00_load.t line 9.
# Looks like you failed 1 test of 1.
dubious
        Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 1
        Failed 1/1 tests, 0.00% okay
t/01_MRO.....
#   Failed test 'use Class::C3::XS;'
#   at t/01_MRO.t line 9.
#     Tried to use 'Class::C3::XS'.
#     Error:  Can't locate loadable object for module Class::C3::XS in @INC 
(@INC contains: /home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib/lib 
/home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib/arch 
/home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib 
/usr/libdata/perl5/i386-openbsd/5.8.8 
/usr/local/libdata/perl5/i386-openbsd/5.8.8 /usr/libdata/perl5/i386-openbsd 
/usr/libdata/perl5 /usr/local/libdata/perl5 
/usr/local/libdata/perl5/site_perl/i386-openbsd 
/usr/libdata/perl5/site_perl/i386-openbsd 
/usr/local/libdata/perl5/site_perl/i386-openbsd 
/usr/local/libdata/perl5/site_perl /usr/libdata/perl5/site_perl/i386-openbsd 
/usr/libdata/perl5/site_perl /usr/local/lib/perl5/site_perl . 
/usr/libdata/perl5/i386-openbsd/5.8.8 
/usr/local/libdata/perl5/i386-openbsd/5.8.8 /usr/libdata/perl5 
/usr/local/libdata/perl5 /usr/local/libdata/perl5/site_perl/i386-openbsd 
/usr/libdata/perl5/site_perl/i386-openbsd /usr/local/libdata/perl5/site_perl 
/usr/libdata/perl5/site_perl /usr/local/lib/perl5/site_perl .) at (eval 3) line 
2
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at t/01_MRO.t line 9.
Undefined subroutine &Class::C3::XS::calculateMRO called at t/01_MRO.t line 42.
# Looks like you planned 2 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
dubious
        Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-2
        Failed 2/2 tests, 0.00% okay
t/02_MRO.....
#   Failed test 'use Class::C3::XS;'
#   at t/02_MRO.t line 9.
#     Tried to use 'Class::C3::XS'.
#     Error:  Can't locate loadable object for module Class::C3::XS in @INC 
(@INC contains: /home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib/lib 
/home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib/arch 
/home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib 
/usr/libdata/perl5/i386-openbsd/5.8.8 
/usr/local/libdata/perl5/i386-openbsd/5.8.8 /usr/libdata/perl5/i386-openbsd 
/usr/libdata/perl5 /usr/local/libdata/perl5 
/usr/local/libdata/perl5/site_perl/i386-openbsd 
/usr/libdata/perl5/site_perl/i386-openbsd 
/usr/local/libdata/perl5/site_perl/i386-openbsd 
/usr/local/libdata/perl5/site_perl /usr/libdata/perl5/site_perl/i386-openbsd 
/usr/libdata/perl5/site_perl /usr/local/lib/perl5/site_perl . 
/usr/libdata/perl5/i386-openbsd/5.8.8 
/usr/local/libdata/perl5/i386-openbsd/5.8.8 /usr/libdata/perl5 
/usr/local/libdata/perl5 /usr/local/libdata/perl5/site_perl/i386-openbsd 
/usr/libdata/perl5/site_perl/i386-openbsd /usr/local/libdata/perl5/site_perl 
/usr/libdata/perl5/site_perl /usr/local/lib/perl5/site_perl .) at (eval 3) line 
2
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at t/02_MRO.t line 9.
Undefined subroutine &Class::C3::XS::calculateMRO called at t/02_MRO.t line 74.
# Looks like you planned 7 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
dubious
        Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-7
        Failed 7/7 tests, 0.00% okay
t/03_MRO.....
#   Failed test 'use Class::C3::XS;'
#   at t/03_MRO.t line 9.
#     Tried to use 'Class::C3::XS'.
#     Error:  Can't locate loadable object for module Class::C3::XS in @INC 
(@INC contains: /home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib/lib 
/home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib/arch 
/home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib 
/usr/libdata/perl5/i386-openbsd/5.8.8 
/usr/local/libdata/perl5/i386-openbsd/5.8.8 /usr/libdata/perl5/i386-openbsd 
/usr/libdata/perl5 /usr/local/libdata/perl5 
/usr/local/libdata/perl5/site_perl/i386-openbsd 
/usr/libdata/perl5/site_perl/i386-openbsd 
/usr/local/libdata/perl5/site_perl/i386-openbsd 
/usr/local/libdata/perl5/site_perl /usr/libdata/perl5/site_perl/i386-openbsd 
/usr/libdata/perl5/site_perl /usr/local/lib/perl5/site_perl . 
/usr/libdata/perl5/i386-openbsd/5.8.8 
/usr/local/libdata/perl5/i386-openbsd/5.8.8 /usr/libdata/perl5 
/usr/local/libdata/perl5 /usr/local/libdata/perl5/site_perl/i386-openbsd 
/usr/libdata/perl5/site_perl/i386-openbsd /usr/local/libdata/perl5/site_perl 
/usr/libdata/perl5/site_perl /usr/local/lib/perl5/site_perl .) at (eval 3) line 
2
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at t/03_MRO.t line 9.
Undefined subroutine &Class::C3::XS::calculateMRO called at t/03_MRO.t line 79.
# Looks like you planned 2 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
dubious
        Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-2
        Failed 2/2 tests, 0.00% okay
t/04_MRO.....
#   Failed test 'use Class::C3::XS;'
#   at t/04_MRO.t line 9.
#     Tried to use 'Class::C3::XS'.
#     Error:  Can't locate loadable object for module Class::C3::XS in @INC 
(@INC contains: /home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib/lib 
/home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib/arch 
/home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib 
/usr/libdata/perl5/i386-openbsd/5.8.8 
/usr/local/libdata/perl5/i386-openbsd/5.8.8 /usr/libdata/perl5/i386-openbsd 
/usr/libdata/perl5 /usr/local/libdata/perl5 
/usr/local/libdata/perl5/site_perl/i386-openbsd 
/usr/libdata/perl5/site_perl/i386-openbsd 
/usr/local/libdata/perl5/site_perl/i386-openbsd 
/usr/local/libdata/perl5/site_perl /usr/libdata/perl5/site_perl/i386-openbsd 
/usr/libdata/perl5/site_perl /usr/local/lib/perl5/site_perl . 
/usr/libdata/perl5/i386-openbsd/5.8.8 
/usr/local/libdata/perl5/i386-openbsd/5.8.8 /usr/libdata/perl5 
/usr/local/libdata/perl5 /usr/local/libdata/perl5/site_perl/i386-openbsd 
/usr/libdata/perl5/site_perl/i386-openbsd /usr/local/libdata/perl5/site_perl 
/usr/libdata/perl5/site_perl /usr/local/lib/perl5/site_perl .) at (eval 3) line 
2
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at t/04_MRO.t line 9.
Undefined subroutine &Class::C3::XS::calculateMRO called at t/04_MRO.t line 62.
# Looks like you planned 2 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
dubious
        Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-2
        Failed 2/2 tests, 0.00% okay
t/05_MRO.....
#   Failed test 'use Class::C3::XS;'
#   at t/05_MRO.t line 9.
#     Tried to use 'Class::C3::XS'.
#     Error:  Can't locate loadable object for module Class::C3::XS in @INC 
(@INC contains: /home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib/lib 
/home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib/arch 
/home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib 
/usr/libdata/perl5/i386-openbsd/5.8.8 
/usr/local/libdata/perl5/i386-openbsd/5.8.8 /usr/libdata/perl5/i386-openbsd 
/usr/libdata/perl5 /usr/local/libdata/perl5 
/usr/local/libdata/perl5/site_perl/i386-openbsd 
/usr/libdata/perl5/site_perl/i386-openbsd 
/usr/local/libdata/perl5/site_perl/i386-openbsd 
/usr/local/libdata/perl5/site_perl /usr/libdata/perl5/site_perl/i386-openbsd 
/usr/libdata/perl5/site_perl /usr/local/lib/perl5/site_perl . 
/usr/libdata/perl5/i386-openbsd/5.8.8 
/usr/local/libdata/perl5/i386-openbsd/5.8.8 /usr/libdata/perl5 
/usr/local/libdata/perl5 /usr/local/libdata/perl5/site_perl/i386-openbsd 
/usr/libdata/perl5/site_perl/i386-openbsd /usr/local/libdata/perl5/site_perl 
/usr/libdata/perl5/site_perl /usr/local/lib/perl5/site_perl .) at (eval 3) line 
2
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at t/05_MRO.t line 9.
Undefined subroutine &Class::C3::XS::calculateMRO called at t/05_MRO.t line 26.
# Looks like you planned 3 tests but only ran 2.
# Looks like you failed 1 test of 2 run.
# Looks like your test died just after 2.
dubious
        Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1, 3
        Failed 2/3 tests, 33.33% okay
t/pod........skipped
        all skipped: Test::Pod 1.14 required for testing POD
Failed Test Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/00_load.t    1   256     1    1  1
t/01_MRO.t   255 65280     2    3  1-2
t/02_MRO.t   255 65280     7   13  1-7
t/03_MRO.t   255 65280     2    3  1-2
t/04_MRO.t   255 65280     2    3  1-2
t/05_MRO.t   255 65280     3    3  1 3
1 test skipped.
Failed 6/7 test scripts. 16/17 subtests failed.
Files=7, Tests=17,  3 wallclock secs ( 0.83 cusr +  2.09 csys =  2.92 CPU)
Failed 6/7 test programs. 16/17 subtests failed.
*** Error code 25

Stop in /home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01 (line 757 of 
Makefile).


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
          Test::More                         0.70     0.47

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = 
/home/chris/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
    PERL5LIB = 
:/home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib/lib:/home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib/arch:/home/chris/.cpanplus/5.8.8/build/Class-C3-XS-0.01_01/blib
    PERL5_CPANPLUS_IS_RUNNING = 30442
    PERL5_CPANPLUS_IS_VERSION = 0.78
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/ksh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /usr/bin/perl
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 1000 0 1000
    EGID: $)  = 1000 0 1000


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=openbsd, osvers=4.0, archname=i386-openbsd
    uname='openbsd'
    config_args='-dsE -Dopenbsd_distribution=defined'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=undef use5005threads=undef useithreads=undef 
usemultiplicity=undef
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -fno-delete-null-pointer-checks 
-pipe -I/usr/local/include',
    optimize='-O2',
    cppflags='-fno-strict-aliasing -fno-delete-null-pointer-checks -pipe 
-I/usr/local/include'
    ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.0'
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', 
lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags ='-Wl,-E '
    libpth=/usr/lib
    libs=-lm -lutil -lc
    perllibs=-lm -lutil -lc
    libc=/usr/lib/libc.a, so=so, useshrplib=true, libperl=libperl.so.10.1
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, 
ccdlflags='-Wl,-R/usr/libdata/perl5/i386-openbsd/5.8.8/CORE'
    cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC '

Reply via email to