This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear EGERMAN, This is a computer-generated error report created automatically by CPANPLUS, version 0.78. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Fri Apr 20 16:28:27 2007] Trying to get 'http://www.cpan.org/authors/id/E/EG/EGERMAN/Lemonldap-Config-Parameters-3.2.0.tar.gz' [MSG] [Fri Apr 20 16:28:28 2007] Trying to get 'http://www.cpan.org/authors/id/E/EG/EGERMAN/CHECKSUMS' [MSG] [Fri Apr 20 16:28:28 2007] Checksum matches for 'Lemonldap-Config-Parameters-3.2.0.tar.gz' [MSG] [Fri Apr 20 16:28:29 2007] Extracted 'Lemonldap-Config-Parameters-3.2.0/' [MSG] [Fri Apr 20 16:28:29 2007] Extracted 'Lemonldap-Config-Parameters-3.2.0/scripts/' [MSG] [Fri Apr 20 16:28:29 2007] Extracted 'Lemonldap-Config-Parameters-3.2.0/scripts/valid.pl' [MSG] [Fri Apr 20 16:28:29 2007] Extracted 'Lemonldap-Config-Parameters-3.2.0/scripts/dump_cache.pl' [MSG] [Fri Apr 20 16:28:29 2007] Extracted 'Lemonldap-Config-Parameters-3.2.0/lib/' [MSG] [Fri Apr 20 16:28:29 2007] Extracted 'Lemonldap-Config-Parameters-3.2.0/lib/Lemonldap/' [MSG] [Fri Apr 20 16:28:29 2007] Extracted 'Lemonldap-Config-Parameters-3.2.0/lib/Lemonldap/Config/' [MSG] [Fri Apr 20 16:28:29 2007] Extracted 'Lemonldap-Config-Parameters-3.2.0/lib/Lemonldap/Config/Initparam.pm' [MSG] [Fri Apr 20 16:28:29 2007] Extracted 'Lemonldap-Config-Parameters-3.2.0/lib/Lemonldap/Config/Parameters.pm' [MSG] [Fri Apr 20 16:28:29 2007] Extracted 'Lemonldap-Config-Parameters-3.2.0/t/' [MSG] [Fri Apr 20 16:28:29 2007] Extracted 'Lemonldap-Config-Parameters-3.2.0/t/test.xml' [MSG] [Fri Apr 20 16:28:29 2007] Extracted 'Lemonldap-Config-Parameters-3.2.0/t/config-parameters.t' [MSG] [Fri Apr 20 16:28:29 2007] Extracted 'Lemonldap-Config-Parameters-3.2.0/t/1.t' [MSG] [Fri Apr 20 16:28:29 2007] Extracted 'Lemonldap-Config-Parameters-3.2.0/META.yml' [MSG] [Fri Apr 20 16:28:29 2007] Extracted 'Lemonldap-Config-Parameters-3.2.0/Changes' [MSG] [Fri Apr 20 16:28:29 2007] Extracted 'Lemonldap-Config-Parameters-3.2.0/MANIFEST' [MSG] [Fri Apr 20 16:28:29 2007] Extracted 'Lemonldap-Config-Parameters-3.2.0/Makefile.PL' [MSG] [Fri Apr 20 16:28:29 2007] Extracted 'Lemonldap-Config-Parameters-3.2.0/README' [MSG] [Fri Apr 20 16:28:29 2007] Extracted 'Lemonldap::Config::Parameters' to '/home/hybrid/perl594/.cpanplus/5.9.4/build/Lemonldap-Config-Parameters-3.2.0' [MSG] [Fri Apr 20 16:28:31 2007] Checking if your kit is complete... Looks good Writing Makefile for Lemonldap::Config::Parameters [MSG] [Fri Apr 20 16:28:31 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Apr 20 16:28:34 2007] cp lib/Lemonldap/Config/Initparam.pm blib/lib/Lemonldap/Config/Initparam.pm cp lib/Lemonldap/Config/Parameters.pm blib/lib/Lemonldap/Config/Parameters.pm Manifying blib/man3/Lemonldap::Config::Parameters.3 [ERROR] [Fri Apr 20 16:28:35 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/hybrid/perl594/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/1.................... # Failed test 'use Lemonldap::Config::Parameters;' # at t/1.t line 9. # Tried to use 'Lemonldap::Config::Parameters'. # Error: Can't locate BerkeleyDB.pm in @INC (@INC contains: /home/hybrid/perl594/.cpanplus/5.9.4/build/Lemonldap-Config-Parameters-3.2.0/blib/lib /home/hybrid/perl594/.cpanplus/5.9.4/build/Lemonldap-Config-Parameters-3.2.0/blib/arch /home/hybrid/perl594/.cpanplus/5.9.4/build/Lemonldap-Config-Parameters-3.2.0/blib /home/hybrid/perl594/lib/5.9.4/i686-linux-thread-multi-64int-ld /home/hybrid/perl594/lib/5.9.4/i686-linux-thread-multi-64int-ld /home/hybrid/perl594/lib/5.9.4 /home/hybrid/perl594/lib/site_perl/5.9.4/i686-linux-thread-multi-64int-ld /home/hybrid/perl594/lib/site_perl/5.9.4/i686-linux-thread-multi-64int-ld /home/hybrid/perl594/lib/site_perl/5.9.4 . /home/hybrid/perl594/lib/5.9.4/i686-linux-thread-multi-64int-ld /home/hybrid/perl594/lib/5.9.4 /home/hybrid/perl594/lib/site_perl/5.9.4/i686-linux-thread-multi-64int-ld /home/hybrid/perl594/lib/site_perl/5.9.4 .) at /home/hybrid/perl594/.cpanplus/5.9.4/build/Lemonldap-Config-Parameters-3.2.0/blib/lib/Lemonldap/Config/Parameters.pm line 3. # BEGIN failed--compilation aborted at t/1.t line 9. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/config-parameters.... # Failed test 'use Lemonldap::Config::Parameters;' # at t/config-parameters.t line 15. # Tried to use 'Lemonldap::Config::Parameters'. # Error: Can't locate BerkeleyDB.pm in @INC (@INC contains: /home/hybrid/perl594/.cpanplus/5.9.4/build/Lemonldap-Config-Parameters-3.2.0/blib/lib /home/hybrid/perl594/.cpanplus/5.9.4/build/Lemonldap-Config-Parameters-3.2.0/blib/arch /home/hybrid/perl594/.cpanplus/5.9.4/build/Lemonldap-Config-Parameters-3.2.0/blib /home/hybrid/perl594/lib/5.9.4/i686-linux-thread-multi-64int-ld /home/hybrid/perl594/lib/5.9.4/i686-linux-thread-multi-64int-ld /home/hybrid/perl594/lib/5.9.4 /home/hybrid/perl594/lib/site_perl/5.9.4/i686-linux-thread-multi-64int-ld /home/hybrid/perl594/lib/site_perl/5.9.4/i686-linux-thread-multi-64int-ld /home/hybrid/perl594/lib/site_perl/5.9.4 . /home/hybrid/perl594/lib/5.9.4/i686-linux-thread-multi-64int-ld /home/hybrid/perl594/lib/5.9.4 /home/hybrid/perl594/lib/site_perl/5.9.4/i686-linux-thread-multi-64int-ld /home/hybrid/perl594/lib/site_perl/5.9.4 .) at /home/hybrid/perl594/.cpanplus/5.9.4/build/Lemonldap-Config-Parameters-3.2.0/blib/lib/Lemonldap/Config/Parameters.pm line 3. # BEGIN failed--compilation aborted at t/config-parameters.t line 15. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Use of uninitialized value $Lemonldap::Config::Parameters::VERSION in concatenation (.) or string at t/config-parameters.t line 16. Can't locate object method "new" via package "Lemonldap::Config::Parameters" at t/config-parameters.t line 22. # Looks like you planned 12 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-12 Failed 12/12 tests, 0.00% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/1.t 1 256 1 1 1 t/config-parameters.t 255 65280 12 23 1-12 Failed 2/2 test scripts. 13/13 subtests failed. Files=2, Tests=13, 0 wallclock secs ( 0.39 cusr + 0.06 csys = 0.45 CPU) Failed 2/2 test programs. 13/13 subtests failed. MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: BerkeleyDB As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'EGERMAN ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'BerkeleyDB' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. -- Summary of my perl5 (revision 5 version 9 subversion 4) configuration: Platform: osname=linux, osvers=2.4.26, archname=i686-linux-thread-multi-64int-ld uname='linux penguin 2.4.26 #1 smp thu jul 1 18:22:25 bst 2004 i686 unknown unknown gnulinux ' config_args='' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='3.3.4', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.2.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.2' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
