This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Sean Cannon, This is a computer-generated error report created automatically by CPANPLUS, version 0.78. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Apr 30 12:22:04 2007] Trying to get 'http://www.cpan.org/authors/id/D/DO/DODGER/Geo-Coder-HostIP_0_02.tar.gz' [MSG] [Mon Apr 30 12:22:05 2007] Trying to get 'http://www.cpan.org/authors/id/D/DO/DODGER/CHECKSUMS' [MSG] [Mon Apr 30 12:22:06 2007] Checksum matches for 'Geo-Coder-HostIP_0_02.tar.gz' [MSG] [Mon Apr 30 12:22:06 2007] Extracted 'Geo-Coder-HostIP/' [MSG] [Mon Apr 30 12:22:06 2007] Extracted 'Geo-Coder-HostIP/t/' [MSG] [Mon Apr 30 12:22:06 2007] Extracted 'Geo-Coder-HostIP/t/Geo-Coder-HostIP.t' [MSG] [Mon Apr 30 12:22:06 2007] Extracted 'Geo-Coder-HostIP/lib/' [MSG] [Mon Apr 30 12:22:06 2007] Extracted 'Geo-Coder-HostIP/lib/Geo/' [MSG] [Mon Apr 30 12:22:06 2007] Extracted 'Geo-Coder-HostIP/lib/Geo/Coder/' [MSG] [Mon Apr 30 12:22:06 2007] Extracted 'Geo-Coder-HostIP/lib/Geo/Coder/HostIP.pm' [MSG] [Mon Apr 30 12:22:06 2007] Extracted 'Geo-Coder-HostIP/README' [MSG] [Mon Apr 30 12:22:06 2007] Extracted 'Geo-Coder-HostIP/Changes' [MSG] [Mon Apr 30 12:22:06 2007] Extracted 'Geo-Coder-HostIP/Makefile.PL' [MSG] [Mon Apr 30 12:22:06 2007] Extracted 'Geo-Coder-HostIP/MANIFEST' [MSG] [Mon Apr 30 12:22:06 2007] Extracted 'Geo::Coder::HostIP' to '/export/home/chris/perl588/.cpanplus/5.8.8/build/Geo-Coder-HostIP' [MSG] [Mon Apr 30 12:22:08 2007] Checking if your kit is complete... Looks good WARNING: Setting VERSION via file 'lib/Geo/Coder/HostIP.pm' failed at /export/home/chris/perl588/lib/5.8.8/ExtUtils/MakeMaker.pm line 501 Writing Makefile for Geo::Coder::HostIP [MSG] [Mon Apr 30 12:22:08 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Apr 30 12:22:11 2007] cp lib/Geo/Coder/HostIP.pm blib/lib/Geo/Coder/HostIP.pm Manifying blib/man3/Geo::Coder::HostIP.3 [ERROR] [Mon Apr 30 12:22:12 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /export/home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/Geo-Coder-HostIP....# Looks like you planned 1 test but ran 1 extra. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED test 2 Failed 1/1 tests, 0.00% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/Geo-Coder-HostIP.t 255 65280 1 1 2 Failed 1/1 test scripts. -1/1 subtests failed. Files=1, Tests=1, 0 wallclock secs ( 0.24 cusr + 0.13 csys = 0.37 CPU) Failed 1/1 test programs. -1/1 subtests failed. *** Error code 255 make: Fatal error: Command failed for target `test_dynamic' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = C PATH = /export/home/chris/perl/bin:/usr/sfw/bin:/usr/ccs/bin:/usr/local/bin:/usr/bin: PERL5LIB = :/export/home/chris/perl588/.cpanplus/5.8.8/build/Geo-Coder-HostIP/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Geo-Coder-HostIP/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/Geo-Coder-HostIP/blib PERL5_CPANPLUS_IS_RUNNING = 19810 PERL5_CPANPLUS_IS_VERSION = 0.78 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /export/home/chris/perl588/bin/perl UID: $< = 100 EUID: $> = 100 GID: $( = 1 1 EGID: $) = 1 1 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=solaris, osvers=2.10, archname=i86pc-solaris-thread-multi-64int uname='sunos soleil 5.10 generic_118855-33 i86pc i386 i86pc ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV', optimize='-O', cppflags='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.3 (csl-sol210-3_4-branch+sol_rpath)', gccosandvers='solaris2.10' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib ' libpth=/usr/local/lib /usr/lib /usr/ccs/lib libs=-lsocket -lnsl -ldl -lm -lpthread -lc perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -R /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/CORE' cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
