This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.
        
--

Dear WSNYDER,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.78. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sat May  5 21:47:13 2007] Trying to get 
'http://www.cpan.org/authors/id/W/WS/WSNYDER/Module-LocalBuild-1.000.tar.gz'
[MSG] [Sat May  5 21:47:14 2007] Trying to get 
'http://www.cpan.org/authors/id/W/WS/WSNYDER/CHECKSUMS'
[MSG] [Sat May  5 21:47:15 2007] Checksum matches for 
'Module-LocalBuild-1.000.tar.gz'
[MSG] [Sat May  5 21:47:15 2007] Extracted 'Module-LocalBuild-1.000/'
[MSG] [Sat May  5 21:47:15 2007] Extracted 'Module-LocalBuild-1.000/t/'
[MSG] [Sat May  5 21:47:15 2007] Extracted 'Module-LocalBuild-1.000/t/02_help.t'
[MSG] [Sat May  5 21:47:15 2007] Extracted 
'Module-LocalBuild-1.000/t/01_manifest.t'
[MSG] [Sat May  5 21:47:15 2007] Extracted 
'Module-LocalBuild-1.000/t/30_localboot.t'
[MSG] [Sat May  5 21:47:15 2007] Extracted 'Module-LocalBuild-1.000/t/00_pod.t'
[MSG] [Sat May  5 21:47:15 2007] Extracted 
'Module-LocalBuild-1.000/t/localboot.pl'
[MSG] [Sat May  5 21:47:15 2007] Extracted 'Module-LocalBuild-1.000/t/Stub.pm'
[MSG] [Sat May  5 21:47:15 2007] Extracted 
'Module-LocalBuild-1.000/t/test_utils.pl'
[MSG] [Sat May  5 21:47:15 2007] Extracted 'Module-LocalBuild-1.000/lib/'
[MSG] [Sat May  5 21:47:15 2007] Extracted 'Module-LocalBuild-1.000/lib/Module/'
[MSG] [Sat May  5 21:47:15 2007] Extracted 
'Module-LocalBuild-1.000/lib/Module/LocalBuild.pm'
[MSG] [Sat May  5 21:47:15 2007] Extracted 'Module-LocalBuild-1.000/README'
[MSG] [Sat May  5 21:47:15 2007] Extracted 'Module-LocalBuild-1.000/Changes'
[MSG] [Sat May  5 21:47:15 2007] Extracted 'Module-LocalBuild-1.000/Makefile.PL'
[MSG] [Sat May  5 21:47:15 2007] Extracted 'Module-LocalBuild-1.000/mlbuilder'
[MSG] [Sat May  5 21:47:15 2007] Extracted 'Module-LocalBuild-1.000/META.yml'
[MSG] [Sat May  5 21:47:15 2007] Extracted 'Module-LocalBuild-1.000/.cvsignore'
[MSG] [Sat May  5 21:47:15 2007] Extracted 'Module-LocalBuild-1.000/COPYING'
[MSG] [Sat May  5 21:47:15 2007] Extracted 'Module-LocalBuild-1.000/MANIFEST'
[MSG] [Sat May  5 21:47:15 2007] Extracted 'Module-LocalBuild-1.000/readme.texi'
[MSG] [Sat May  5 21:47:15 2007] Extracted 'Module::LocalBuild' to 
'/export/home/chris/perl588/.cpanplus/5.8.8/build/Module-LocalBuild-1.000'
[MSG] [Sat May  5 21:47:17 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Module::LocalBuild

[MSG] [Sat May  5 21:47:17 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Sat May  5 21:47:22 2007] cp lib/Module/LocalBuild.pm 
blib/lib/Module/LocalBuild.pm
cp mlbuilder blib/script/mlbuilder
/export/home/chris/perl588/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" 
blib/script/mlbuilder
Manifying blib/man1/mlbuilder.1
Manifying blib/man3/Module::LocalBuild.3

[ERROR] [Sat May  5 21:47:25 2007] MAKE TEST failed: Illegal seek 
PERL_DL_NONLAZY=1 /export/home/chris/perl588/bin/perl "-MExtUtils::Command::MM" 
"-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_pod..........ok
        1/1 skipped: various reasons
t/01_manifest.....ok
        1/1 skipped: various reasons
t/02_help.........ok
t/30_localboot....Building Perl Libraries...
%Error: PERL not set in environment
%Error: Perl LocalBuild failed
BEGIN failed--compilation aborted at ../t/localboot.pl line 28.
%Error: Command Failed cd test_dir ; /export/home/chris/perl588/bin/perl 
../t/localboot.pl, 512, stopped at t/test_utils.pl line 27.
dubious
        Test returned status 2 (wstat 512, 0x200)
DIED. FAILED tests 3-7
        Failed 5/7 tests, 28.57% okay
Failed Test      Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/30_localboot.t    2   512     7   10  3-7
2 subtests skipped.
Failed 1/4 test scripts. 5/11 subtests failed.
Files=4, Tests=11,  2 wallclock secs ( 1.46 cusr +  0.56 csys =  2.02 CPU)
Failed 1/4 test programs. 5/11 subtests failed.
*** Error code 2
make: Fatal error: Command failed for target `test_dynamic'


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
          Pod::Usage                         1.35        0

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = C
    PATH = 
/export/home/chris/perl/bin:/usr/sfw/bin:/usr/ccs/bin:/usr/local/bin:/usr/bin:
    PERL5LIB = 
:/export/home/chris/perl588/.cpanplus/5.8.8/build/Module-LocalBuild-1.000/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Module-LocalBuild-1.000/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/Module-LocalBuild-1.000/blib
    PERL5_CPANPLUS_IS_RUNNING = 9906
    PERL5_CPANPLUS_IS_VERSION = 0.78
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /export/home/chris/perl588/bin/perl
    UID:  $<  = 100
    EUID: $>  = 100
    GID:  $(  = 1 1
    EGID: $)  = 1 1


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=solaris, osvers=2.10, archname=i86pc-solaris-thread-multi-64int
    uname='sunos soleil 5.10 generic_118855-33 i86pc i386 i86pc '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define 
usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -fno-strict-aliasing -pipe 
-Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE 
-D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV 
-DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV',
    optimize='-O',
    cppflags='-D_REENTRANT -fno-strict-aliasing -pipe 
-Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='3.4.3 (csl-sol210-3_4-branch+sol_rpath)', 
gccosandvers='solaris2.10'
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', 
lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib '
    libpth=/usr/local/lib /usr/lib /usr/ccs/lib
    libs=-lsocket -lnsl -ldl -lm -lpthread -lc
    perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc
    libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='  -R 
/export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/CORE'
    cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'

Reply via email to